Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
R14MD – R18MD
Modular pressure regulators,
suitable for compressed air
FEATURES
Modular pressure regulator for inlet
pressure up to 20 bar (290 psi).
Inlet and outlet connections 1/4” – F and
1/8” – F in the body.
Outlet pressure is controlled by a rubber
diaphragm.
Adjusting knob for pressure regulation
with lock system.
Overpressure relieving function.
Modular design to couple with same
series: filter and lubricator.
Holes for wall mounting.
The product complies with the directive
97/23/CE PED.
Available units composed of:
Filter + Regulator + Lubricator with wall
mounting possibility.
SPECIFICATIONS
Regulator weight: ~0.3 kg (~0.66 lb)
Standard version operating temperature: -10 °C ÷ +50 °C (-4 °F ÷ +122 °F)
Main valve leakage classification: VI (bubble tight)
Flow coefficient: Kv= 0.3 Nm³/h Cv = 0.35 US gal/min
Degree of protection: IP25
G 1/8 port for outlet pressure gauge on both sides
MATERIALS
Body: zinc alloy casting
Bonnet: PA 6.6 / POM
Main valve spring: stainless steel AISI 302
Adjusting spring: C85 (not in contact with the fluid)
Diaphragm: NBR
O-Ring: NBR
Main valve gasket: NBR
ACCESSORIES
Ring-nut for panel or bracket mounting: P35013110304
Bracket for wall mounting (10 pieces): M14201
Not relieving version for gas and liquid
Gauge
Dome loaded version: outlet pressure to be controlled by a pilot pressure
SPARE PARTS
Complete kit: o-rings, complete main valve, diaphragm
Copyright © ID Insert Deal S.r.l. - All rights reserved
2
flow charts
R14MD-R18MD Pin=10 bar - Aria/Air
9
8
Outlet pressure [bar]
7
6
5
4
3
2
1
0
0
10
20
30
40
50
Flow rate [Nm3/h]
Copyright © ID Insert Deal S.r.l. - All rights reserved
3
available model types
Regolatori di pressione
Pressure regulators
Regolatori di pressione per media pressione in lega di zinco idonei per aria compressa
Pressure regulators for medium pressure made of zinc alloy suitable for compressed air
Corpo da fusione in zama / Cast zama body
Campana in plastica / Bonnet made of plastic
Struttura modulare / Modular execution
TYPE
CONNECTION
RELIEVING GAUGE
IN/OUT
PS bar
P.Out bar
CODE
MEDIUM
R14 MD
R14 MD
R14 MD
R14 MD
20
20
20
20
0,2-1,5
0,3-3
0,8-8
1,5-15
G 1/4-F
G 1/4-F
G 1/4-F
G 1/4-F
S
S
S
S
N
N
N
N
515#N
515#N
515#N
515#N
Air
Air
Air
Air
RP 14 MD **
20
1,5-15
G 1/4-F
S
N
515#N
Air
R18 MD
R18 MD
R18 MD
R18 MD
20
20
20
20
0,2-1,5
0,3-3
0,8-8
1,5-15
G 1/8-F
G 1/8-F
G 1/8-F
G 1/8-F
S
S
S
S
N
N
N
N
515#M
515#M
515#M
515#M
Air
Air
Air
Air
RP 18 MD **
20
1,5-15
G 1/8-F
S
N
515#M
Air
R14 MD
R18 MD
** Versione pilotata / Dome loaded execution
ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD
Attacchi entrata/uscita NPT / Inlet/outlet connections NPT
ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD
Pressione uscita pretarata / Pre-set outlet pressure
Pressione uscita tarata fissa, vite con dado cieco / Fixed outlet pressure, screw with cap nut
Versione non Relieving / Non Relieving execution
Sgrassato uso O2 / Degreased for O2
ACCESSORI / ACCESSORIES
Ghiera P35013110304 / Ring nut P35013110304
Staffa metallica M14201 - Confezione 10 pezzi / Bracket M14201 - 10 pieces
Copyright © ID Insert Deal S.r.l. - All rights reserved
4
generating the product code
Reg.modulari micro LL
AA BB CC DD E F GG
AA
Attacchi / Connections
BB
CC
Pressione ingresso / Inlet pressure
Intervallo uscita / Outlet range
DD
Tipologia di fluido / Fluid type
E
Pilotato / Pilot operated
F
GG
Marchiato / Marked
Accessori / Accessories
M0
N0
U0
V0
C0
A0
B0
D0
E0
01
97
98
99
N
P
I
00
R18MD G 1/8-F
R14MD G 1/4-F
R18MD 1/8" NPT-F
R14MD 1/4"NPT-F
20 bar
0,2 - 1,5 bar
0,3 - 3 bar
0,8 - 8 bar
1,5-15 bar
Relieving
NBR
EPDM
FPM
Non pilotato
Pilotato
ID
Nessun accessorio
CODE COMPOSITION EXAMPLE
515# N0 C0 D0 01 N I 00
515#: Modular regulator LL
N0: Connection G 1/4 – F
C0: PS=20 bar (290 psi)
D0: Outlet pressure range 0,8 – 8 bar (11,6 – 116 psi)
01: Relieving version
N: Not dome loaded
I: Insert Deal
00: No accessories
Copyright © ID Insert Deal S.r.l. - All rights reserved
5
technical drawings (dimensions in mm)
Bracket and Ring-Nut to be ordered separately
Order number bracket: M14201
Order number Ring-Nut: P35013110304
30
26
M30x1.5
4,5
Ring-Nut P35013
Bracket P36042
22
IN
OUT
13
,5
Ø4
34
~95
55
GAUGE OPTIONAL
G 1/8 GAUGE PORT
30
40
TYPE
R18 MD 1/8" GF
R14 MD 1/4" GF
R18 MD 1/8" NPTF
R14 MD 1/4" NPTF
~52
IN/OUT
G 1/8"-F
G 1/4"-F
1/8"NPT-F
1/4"NPT-F
Copyright © ID Insert Deal S.r.l. - All rights reserved
Pout [bar]
0.2÷1.5
0.3÷3
0.5÷5
0.8÷8
1.5÷15
GAUGE-ORDER NUMBER GAUGE RANGE [bar]
0ABMAA19
0÷2.5
0ABMAA20
0÷6
0ABMAA21
0÷12
0ABMAA22
0÷16
0ABMAA23
0÷25
6
ID Insert Deal Srl
Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso.
ID Insert Deal reserves the right to change and/or modify product specifications without prior notice.
Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e
manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente.
Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and
maintenance of any ID products remains entirely to the purchaser.
Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl.
Reproduction forbidden. All rights reserved; the hereby document can’t be reproduced, also partially, without the authorization of ID Insert Deal Srl.
2^S-515 - R14MD-R18MD_IT_00
Azienda con sistema di gestione qualità certificato.
certificato N° 50 100 9191
Company with certificated quality management system.
certificate N° 50 100 9191
Copyright © ID Insert Deal S.r.l. - All rights reserved
7