Sede legale : via Villani, 2 - 26900 - Lodi Sede operativa : via Napoli, 6 - 26900 - Lodi Web : www.2bi.it e-mail : [email protected] Tel. : (39) 0371 610210 Fax : (39) 0371 417859 Pump PP 1000-ADD Code 3043 Description This pump is made of PP/PTFE and can deliver an adjustable low amount of additives, disinfectants, insecticides etc. It is installed in a s.s. box also containing the air pressure regulator and the solenoid valve to operate the pump. It is able to dose up to about 350 lt/hour (@ 4 bar) by the adjustable needle valve that can be totally open in 17 complete turns. The pump PP1000/ADD can be connected to the electronic controller code 3843 or to many process conductivity meters to make a complete dosing system, i.e.detergent + additive. When the pump will be connected to a pressure line, ask for the s.s. check valve code 9312. Caratteristiche tecniche supplied supplied PP PTFE female 3/8” G-NPT fitting hose PE 4 x 6 4 mts 5 mts 4 x 6 mm. 1,5 mts max. about 350 lts/hour 10 bar max. 4 bar 3 to 7 bar about 950 Nl/hour 24Vac 3,5VA 350 x 230 x 190 mm. 6 kg. 09/06 Pump body Membranes & valves Inlet connection Outlet connection Inlet hose & s.s. strainer Delivery PE hoseand fitting Height from floor Capacity (water) Air pressure supply Factory set air pressure Operating air pressure Air consumption @ 5 bar Solenoid valve Size Weight