Company with Quality System Certified by DNV
ELECTRIC WINDING MACHINES
For Motors
ISO 9001/2000
Net Weight: 125 Kg.
Dimensions mm 730 x 810 x 1490
IT.0465-1B
Winding machines for electric motor
skein
For motor up to 50HP. Supplied with:
• 2- Faceplates ∅ mm 300-500;
• 2- pairs of arbors ∅ 40 - 80 mm with 6
grooves;
• 2- Pair of square mandrels;
• 1- Digital preset counter
• 1- Three-phase clutch motor 2 speeds
700-1400, HP 0.6-0.35, Hz 50, Volt
400V; A 1.5-1.3;
It allows a gradual starting of the
winding spindle.
• 1- Table of sheet-steel with drawer;
• 1- Safety guard
Complete frame in aluminium
The gear with transmission belt has three
speeds.
On request it is possible to supply the
machine with:
• 1- Set of straight arbors
• 1- Set of concentric arbors
IT.0467-36
Winding machines for rotor windings
For wires max. ∅ mm. 1,5
Max. ∅ of rotor mm. 100
Max. width of rotor mm. 130
Max. length of rotor shaft mm. 400
The machine is supplied with:
• 1- Faceplate ∅ mm 500 with 4 slots;
• 2- Rotor supports;
• 1- Gripper with fast locking and rotating
jaws for winding into straight and raking
slots;
• 1- Microprocessor electronic instrument
with possibility to memorise more
programs.
• 1- Bobbin-holder type TC/RFR complete
with column and box ∅ mm 220.
• 1- 3phase clutch motor; Volt 230/400V;
• 1- Table of sheet-steel with drawer;
• 1- Safety guard;
Weight net: 155 Kg.
Dimensions mm 860 x 810 x 1630
Copyright © italtec s.r.l. All Rights Reserved
Ci riserviamo di apportare modifiche e migliorie senza preavviso
We reserve the right to change these specifications without notice
Photos et données techniques susceptibles de modifications sans avis
ITALTEC S.R.L.
SISTEMI TECNICI DIDATTICI
20090 FIZZONASCO MI (Italy) – Via privata Liguria, 3
Tel. +39 02-90.721.606
e-mail: [email protected]
Fax. +39-02-90.720.227
http://www.italtec.it
EN0465LE-Rev.01/11-2003