Transfer > Diesel Tank with 12 Volt pump and accessories
Diesel Tank 12 Volt Art. 428/440-KC
Kit complete on 440 lt tank with cover and flow-meter
For diesel transfer
TOTALLY EXEMPT ADR 1.1.3.1.c
Accessories: rubber exit hose 4 mt, digital flow-meter and automatic aluminium gun. Very strong cover with padlock. Self-priming, rotating, electric vane pump, equipped with by-pass valve and filter, brush
motor, DC, low tension with intermittent cycle, closed type in protection class IP55,
directly flanged to the pump body
Battery cables: length 2 mt
Connections: thread Ø 1”
All components are properly placed on a 440 litres polyethylene tank with filler plug with
safety valve, level indicator, shape for lifting with forks when it’s full and handles for
lifting when it’s empty.
Use only with diesel: viscosity from 2 to 5,35 Cst (at a temperature of 37,8°C) and
minimum flash point (PM) 55°C
Electric
Diesel
PLASTIC, STEEL
BODY: IN CAST IRON
VANES: IN RESIN
ROTOR: IN STEEL
Allowed fluids
DIESEL
Not allowed fluids
GASOLINE, INFLAMMABLE LIQUIDS WITH GASOLINE, INFLAMMABLE LIQUIDS
WITH PM<55°C, LIQUIDS WITH VISCOSITY >20 Cst, WATER, FOOD LIQUIDS,
CORROSIVE CHEMICAL
Features
Material
PLASTIC, STEEL
BODY: IN CAST IRON
VANES: IN RESIN
ROTOR: IN STEEL
Working
ELECTRIC
Voltage
12 V
Supply
40 LT/MIN
Capacity
440 LT
Entry Diameter
1"
Exit Diameter
1"
Height
700 MM
Length
1200 MM
Width
800 MM
Screw Thread
1"
Vertical Lift
12 mt
Maximum Suction Height
2-3 mt
Operating Temperature
-20 ÷ 60 °C
Duty Cycle
30 min
Included accessories
Automatic fuel gun
Art.227
Rubber exit hose
Art.745/U
Gear digital flow-meter
Art.541/C
This product falls under certain Community directives, so it is CE marked and has the "EC declaration of conformity" in the instruction manual accompanying the
appliance. We make available for consultation Directives concerning this product: