Progetto MISCHA
Microfluidics Laboratory for Scientific and TeCHnological Application
Pit‐Stop meeting – II, 30 Ottobre 2009
Aula Magna “A. Lepschi” ‐ Dipartimento di Ingegneria dell’Informazione
Università degli Studi di Padova, Via Gradenigo 6/B
Agenda
14.00
14.15
15.00
15.45
A. Paccagnella ‐ Benvenuto e introduzione
M.Maggini
‐ Stato dei lavori
Presentazione flash dei poster
Sessione poster & coffee break
• Development of a lumped parameters electrical model of the electrode/electrolyte interface
of MISCHA chip (M. Marinaro)
• Characterization of a fully integrated microdevice for in‐vitro single cell assays (A. Ferrario)
• Exploring boundary conditions in heterogeneous catalytic reactors with low peclet (D. Dalle
Nogare)
• Multiphase flow studies in a microscale set‐up (S. Pizzato)
• Slip boundary conditions for dense suspensions: insights from granular mechanics (R. Artoni)
• Structural modification of the channels in a micor‐fluidic device (N. Rossetto)
• How fast is a fluid in a microchannel? (I. Fortunati)
• Separation of chemical species via hydrodynamic focusing in microfluidic devices (S. Carlotto)
• Organic Synthesis in Microfluidic Reactors (P. Donnola)
• Continuous flow Suzuki coupling of aryl chlorides by polymer‐supported Pd catalysts in
microcapillaries (P. Maity)
• Rapid method for the inertization of microfluidic devices (S. Silvestrini)
• Synthesis of Oncological Drugs by Flow Techniques (E. Rossi)
• Fabrication of sculpted surfaces and patterned microchannels by double replica molding (D.
Ferraro)
• Realization of microfluidic devices for didactical demonstrations of fluidodynamics (F. Tesser)
17.30
Discussione: consuntivo della giornata e previsioni di attività future (a cura dei
responsabili di WP)
18.00
Chiusura