ESC
ELESA original design
Door lock handles
with/without built-in lock
Features and applications
ESC door lock handle (ELESA patent) keeps the door locked in the closed
position. Because of its location outside the door, its installation is very
simple.
The handle dimensions are such as to allow the assembly on profiles with
a minimum size of 25 mm and a maximum of 40 mm.
The handle is able to compensate for any misalignment of the door
bringing it back to the correct position while closing by means of the builtin guides.
The handle is tamperproof from the outside thanks to the rear fastening
(ESC.90-BM) or front fastening (ESC.90-FM) with caps not removable
when the handle is closed and preventing access to the screws.
Under specific tests the handle has always maintained unchanged
performance for over 40000 cycles.
Assembly instructions
To ensure a correct opening release strength (45 N as long as the handle
is assembled in best conditions), we recommend to position the two
elements of the handle as close as possible (Fig. 1) during assembly.
Montaggio posteriore per mezzo di viti M6 a testa esagonale DIN 933 o
dadi esagonali M6 DIN 439B: posizionare la vite come indicato in fig.2. Per
facilitare il montaggio con il dado, raccomandiamo di fissare inizialmente il
dado come indicato nel disegno.
Front mounting by means of M6 cylindrical-head screws: place the
doorframe and the door by applying the relevant caps that prevent access
to the screws (Fig. 3) (tamperproof).
Solo a portello aperto è possibile rimuovere le calottine con un cacciavite
sia dal lato portello (Fig.4) che dal lato montante (Fig.5).
21-10-2014
ELESA models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.
www.elesa.com • Latches
• Handles
Glass-fibre reinforced polyamide based (PA) technopolymer, black
colour, matte finish. Acetal resin based (POM) technopolymer retention
wings. Resistant to solvents, oils, greases and other chemical agents.
• Stator and rotor
Nickel-plated zinc alloy.
• Closing lever
Zinc-plated steel, 2 mm thickness.
• Two keys
Nickel-plated brass.
• Standard executions
www.elesa.com • Latches
Code
Description
225021
ESC.90-BM-SS
225022
ESC.90-FM-SS
83
225023
ESC.90-BM-K-90-F
115
83
225024
ESC.90-FM-K-90-F
115
225025
ESC.90-BM-K-180-F
115
225026
ESC.90-FM-K-180-F
115
225029
ESC.90-BM-K-90-U
115
225030
ESC.90-FM-K-90-U
115
225031
ESC.90-BM-K-180-U
115
225032
ESC.90-FM-K-180-U
115
ELESA models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.
21-10-2014