NUOVA
s.r.l.
IMPIANTI TECNOLOGICI
ELETTROMECCANICI SERVICE
Nuova I.T.E.S. s.r.l.
Via Galanti, 2 - 74100 - Taranto
www.iteselettromeccanica.it
Nuova I.T.E.S. s.r.l.
Offices & Factory:Via Galanti, 2 - 74100 - Taranto
Casella Postale 575 AG.12 - 74100 - Taranto
Tel. +39 099 4725881 – Fax +39 099 4729154
P.IVA & VAT 02934390739
[email protected] - www.iteselettromeccanica.it
ENGLISH
graphics and printing
esseemme.net
Nuova I.T.E.S. s.r.l. boasts a tradition that dates back to 1996 and is specialized in
NUOVA
repairing electrical equipment in low and medium voltage, AC and DC and
transformers.
Repair activities, in addition to the usual electric rewinding works, extend to
s.r.l.
mechanical changes, restoration of bearings and bushings in white metal and complete revision, until the repainting of the machines.
IMPIANTI TECNOLOGICI
ELETTROMECCANICI SERVICE
We are able to operate on:
 electric motors, alternating current or direct current, in low or medium voltage;
 cage motors;
 slip-ring motors;
 explosion-proof motors;
 repair and rewinding of any type of motor or generator;
 vibrational analysis on site;
 technical assistance on site.
Moreover we ensure the removal and installation of electrical machines and transformers on site and collection and
delivery of products wherever in Italy; our technicians are qualified to work at height as required by law, and are
always active for maintenance and assistance on site.
Quality of our work is ensured by the use of advanced products and solutions which allow us to obtain excellent
results both from the point of view of functionality and safety. The result is a company that operates with integrity,
professionalism, reliability and safety.
Quality of the products is guaranteed by a shop equipped for the reparation of any type of rotating electric machines,
of any brand and characteristic.
Nuova I.T.E.S. s.r.l. can withdraw electric motors and pumps with own transportation and handling tools, everywhere
in Italy; if necessary we take care to disassemble motors directly at customer’s site.
Actually Nuova I.T.E.S. s.r.l. has a staff made by electromechanicals, mechanics, coil winders, turners and carpenters,
able to satisfy any.
Nuova I.T.E.S. s.r.l. has a test laboratory that can make every test on repaired/reconditioned motors. Specialized
personnel is able to fit non destructive tests to understand the state of the installed machines on site.
INSTRUMENTS
 Portable analyzer to test vibrations on rotating electric machines.
 Equipment to perform tests for impulse (Surge Test) up to 24 KV - check of short circuits of coils.
 Portable equipment for checking isolation and polarization index.
 Portable equipment to test dielectric rigidity.
EQUIPMENT
Reference List
Acquedotto Lucano
Acquedotto Pugliese
Ansaldo Sistemi Industriali SpA
ENI Refinery Taranto
Enichem SpA
Enipower
ERG
Friel
Gamesa Eolica
Heineken Italia
KSB
Marelli Motors SpA
Polimeri Europa
Sapio Taranto
Termomeccanica SpA
Vestas Italia
 Lathe machines;
 Milling machines;
 Coil winder machines;
 Lathe machine for bandage;
 Test room;
 Balancing machine;
 Drilling column machine;
 Steam washing plant;
 Sand cleaning plant;
 Impregnation Plant in a controlled chamber;
 Ovens for drying and polymerization at controlled temperature, air forced circulation and
internal rotation of windings to treat;
 Welding machines and TIG for welding collectors
of lamellar type;
 Continuous wire-welding machines;
 Double hook cranes for an easy and sure extraction of rotors from motors;
 Fork-lifts;
 Electric Equipments and Instrumentations.
Nuova I.T.E.S. s.r.l. boasts a tradition that dates back to 1996 and is specialized in
NUOVA
repairing electrical equipment in low and medium voltage, AC and DC and
transformers.
Repair activities, in addition to the usual electric rewinding works, extend to
s.r.l.
mechanical changes, restoration of bearings and bushings in white metal and complete revision, until the repainting of the machines.
IMPIANTI TECNOLOGICI
ELETTROMECCANICI SERVICE
We are able to operate on:
 electric motors, alternating current or direct current, in low or medium voltage;
 cage motors;
 slip-ring motors;
 explosion-proof motors;
 repair and rewinding of any type of motor or generator;
 vibrational analysis on site;
 technical assistance on site.
Moreover we ensure the removal and installation of electrical machines and transformers on site and collection and
delivery of products wherever in Italy; our technicians are qualified to work at height as required by law, and are
always active for maintenance and assistance on site.
Quality of our work is ensured by the use of advanced products and solutions which allow us to obtain excellent
results both from the point of view of functionality and safety. The result is a company that operates with integrity,
professionalism, reliability and safety.
Quality of the products is guaranteed by a shop equipped for the reparation of any type of rotating electric machines,
of any brand and characteristic.
Nuova I.T.E.S. s.r.l. can withdraw electric motors and pumps with own transportation and handling tools, everywhere
in Italy; if necessary we take care to disassemble motors directly at customer’s site.
Actually Nuova I.T.E.S. s.r.l. has a staff made by electromechanicals, mechanics, coil winders, turners and carpenters,
able to satisfy any.
Nuova I.T.E.S. s.r.l. has a test laboratory that can make every test on repaired/reconditioned motors. Specialized
personnel is able to fit non destructive tests to understand the state of the installed machines on site.
INSTRUMENTS
 Portable analyzer to test vibrations on rotating electric machines.
 Equipment to perform tests for impulse (Surge Test) up to 24 KV - check of short circuits of coils.
 Portable equipment for checking isolation and polarization index.
 Portable equipment to test dielectric rigidity.
EQUIPMENT
Reference List
Acquedotto Lucano
Acquedotto Pugliese
Ansaldo Sistemi Industriali SpA
ENI Refinery Taranto
Enichem SpA
Enipower
ERG
Friel
Gamesa Eolica
Heineken Italia
KSB
Marelli Motors SpA
Polimeri Europa
Sapio Taranto
Termomeccanica SpA
Vestas Italia
 Lathe machines;
 Milling machines;
 Coil winder machines;
 Lathe machine for bandage;
 Test room;
 Balancing machine;
 Drilling column machine;
 Steam washing plant;
 Sand cleaning plant;
 Impregnation Plant in a controlled chamber;
 Ovens for drying and polymerization at controlled temperature, air forced circulation and
internal rotation of windings to treat;
 Welding machines and TIG for welding collectors
of lamellar type;
 Continuous wire-welding machines;
 Double hook cranes for an easy and sure extraction of rotors from motors;
 Fork-lifts;
 Electric Equipments and Instrumentations.
NUOVA
s.r.l.
IMPIANTI TECNOLOGICI
ELETTROMECCANICI SERVICE
Nuova I.T.E.S. s.r.l.
Via Galanti, 2 - 74100 - Taranto
www.iteselettromeccanica.it
Nuova I.T.E.S. s.r.l.
Offices & Factory:Via Galanti, 2 - 74100 - Taranto
Casella Postale 575 AG.12 - 74100 - Taranto
Tel. +39 099 4725881 – Fax +39 099 4729154
P.IVA & VAT 02934390739
[email protected] - www.iteselettromeccanica.it
ENGLISH
graphics and printing
esseemme.net