Date of
print/release
Distributors of kitchen
and bedroom components
June
2015
Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information
but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product
available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
Italian Wirework
Italian Wirework
Fitting Instructions
Dynamic Soft Closing Wirework
150 Base Pull Out
150mm Dynamic Pull Out Base
Features:

Cabinet width: 150mm
Minimum internal cabinet depth: 450mm
 Soft close mechanism
 25kg loading capacity

CODEDESCRIPTION
69DYN001
2
150 DYNAMIC PULL OUT BASE
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Serie Gold - Gold Range
Cestello Jolly Estraibile con guide laterali sinistre
Extractable Jolly basket with guide rails on the left-hand side
Art. 1104
224
L
32
9
(ext)
45
32
9
32
444,5
493,5
14,5
22,5
285
12
130
Attacco all'Anta
Door bracket
4
14
4
68
96
4,8
4
538
93,5
5
4,8
14
7
14
6,3
A
Profondità / Depth
1104 Y / 15 - 50 C
Optional
Y: Soft-Closing
Caratteristiche
Principali
Main
Features
Finitura / Finish
C
Cesto Cromato
Chromed Basket
o Estrazione Guida Totale
o Portata statica Guida: 245 N (25kg)
o Portata dinamica Guida: 196 N (20 kg)
o Cromatura Galvanica con assenza totale di residui tossici
o Materiale Tondino metallico: Ferro Fe360, vari diametri
o Soft-Close disponibile su richiesta
Larghezza / Width
L (cm)
15
20
25
B [mm]
111
155
205
o Totally extractable guides
o Static load limit: 245 N (25kg)
o Dynamic load limit: 196 N (20 kg)
o Galvanic Chromium Plating without toxic residues
o Metal bar material: Iron Fe360, different diameters
o Soft-close available as Optional
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Il prodotto è adatto ad usi alimentari. Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
Product is suitable for alimentary purposes. See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
3
A [mm]
290
455
560
28
45
50
B
Documento NR.
058/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Revisione
26/02/2013
Rev.
02
web www.tkcomponents.co.uk
EMAIL [email protected]
FISSAGGIO GUIDE
AL
MOBILE.
-
Fix the rails onto the cabinet.
4
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]


ƒ
„ƒ
…††‡‡‡‡
†ˆ‰
Versioni: 108F-1104F-1114F-1124F-2104F- attacco anta tipo "Farfalla"
Models: 108F-1104F-1114F-1124F-2104F "Butterfly" door bracket.
5

 ­€‚ 
Tel 0161 336 3636
web www.tkcomponents.co.uk
free fax 0808 144 2422
EMAIL [email protected]
Dynamic Soft Closing Wirework
150 Pull Out Towel Rail
150mm Dynamic Pull Out Towel Rail
Features:

Cabinet width: 150mm
Minimum internal cabinet depth: 450mm
 Soft close mechanism
 25kg loading capacity

CODEDESCRIPTION
69DYN015
6
150 DYNAMIC PULL OUT TOWEL RAIL
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Serie Gold - Gold Range
Cestello Jolly portastrofinacci estraibile con guide laterali sinistre
Extractable Jolly towel-holder basket with guide rails on the left-hand side
Art. 1106
32
9
(ext)
22,7
45
14,5
L
12
224
32
9
444,5
Attacco all'Anta
Door bracket
4
14
4
68
96
4,8
4
5
93,5
111
453
1106 Y / 15 - 45 C
14
4,8
370
531
6,3
7
14
311
Larghezza / Width
Profondità / Depth
A [mm]
45
453
L (cm)
15
B [mm]
111
Finitura / Finish
C
Cesto Cromato / Chromed Basket
Caratteristiche
Principali
Main
Features
o Estrazione Guida Totale
o Portata statica Guida: 245 N (25kg)
o Portata dinamica Guida: 196 N (20 kg)
o Cromatura Galvanica con assenza totale di residui tossici
o Materiale Tondino metallico: Ferro Fe360, vari diametri
o Soft-Close di serie
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Il prodotto è adatto ad usi alimentari. Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
Product is suitable for alimentary purposes. See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
7
o Totally extractable guides
o Static load limit: 245 N (25kg)
o Dynamic load limit: 196 N (20 kg)
o Galvanic Chromium Plating without toxic residues
o Metal bar material: Iron Fe360, different diameters
o Soft-close as standard
Documento NR.
059/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
14/09/2012
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
SISTEMA DI MONTAGGIO CONSIGLIATO PER ART.108-1104-1106-1114-1124-2104S-3104
ASSEMBLY SUGGESTED INSTRUCTIONS FOR ART.108-1104-1106-1114-1124-2104S-3104

 ­





‡
…† …† …†
€­­‚€
„
204
162
31
32
18
18
12
13
315
282,5
ƒ„
32
9
18
32
35,5
Ø6
9
0
18
2,5
256
345
442,5
492,5
0
 
 ‚
14
105
9
Ø6,3
14
9
8
12
21,5
42,5
Per PENSILE
Prof. 28
266,5
9
14
9
466,5
„ˆ‰‰
Šˆ‰‰
W
12
21,5
27 32
9
18
96
32
18
6
FRONTE
MOBILE
9
Ø6
0
2
224
2,5
510
0
W
13,55 1,5
332
8
460
8
12
Ø6,3
34
14 9
9
42,5
Per BASE
Prof. 50
258
233
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]


„“…
„“…
 „‹‚ ­‹‹‚Œ­‹‚Œ­ˆ‹‚Œ…
­€ „‹‹‹Œ…
‚­ „‹‹Œ…
‰€

ƒ
Ž
ƒ
‘’
”•
”
–
ƒ


ƒ


 ­€‚‚‚ƒ„…ƒ†
‡ˆ‰‚Š‹‰‚€ˆŒ­‰‚€‚‰‚­‡ˆ‰‚Š‹‰‚€‚‰€­
9
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Elite Soft Closing Wirework
150 Base Pull Out
150mm Elite Pull Out Base
Features:

Cabinet width: 150mm
Minimum internal cabinet depth: 455mm
 Soft close mechanism
 40kg loading capacity

CODEDESCRIPTION
69ELITE001
10
150 ELITE PULL OUT BASE
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Cestello Jolly 2 piani con guide a sinistra
Extractable Jolly basket with two shelves and left rails
Art. 5104E
14
10,9
9
L
(ext)
30
273
66
44
30
14
9
54,5
9
44
151
9
9
14
66
Ellite
5
448
10
10
521
67
30
10
370
STAFFE ANTA
Door Brackets
n4
321
10
C
5104E Y / 15-45 P C B
Imballo singolo
Single packaging
Caratteristiche
Principali
Main
Features
Finitura Ripiano
Shelf Finishing
G: Grigio / Grey
B: Bianco / White
V: Vetro / Glass
Profondità / Depth
A [mm]
28*
276
45
451
Larghezza / Width
L [mm]
15
150
20
200
25
250
* Solo per larghezza 15 cm
only for cm 15 width
B[mm]
110
160
210
C[mm]
87
137
187
o Melamine multilayer shelves
o Possibility of Glass shelves
o Titanium shelf available only on titanium structures and vice-versa
o Oval iron 10x5 wire structure
o Equipped with n.2 GRASS Dynamic XP left-hand in-line slides
o Soft-closing system as standard
o Capacity [kg]: 40
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
11
Finitura Cestello
Basket Finishing
C: Cromo / Chromed
N: Champagne
T: Titanio / Titanium
o Ripiano in multistrato melaminico
o Possibilià di ripiano in Vetro
o Ripiano in Titanio disponibile solo per struttura in Titanio
o Struttura in filo ovale 10x5
o Equipaggiato con n.2 guide sinistre GRASS Dynamic XP
o Sistema Soft-closing di serie
o Portata [kg]: 40
166 `3
B
A`3
Documento NR.
091/2013
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
08/10/2013
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
12
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
13
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic Soft Closing Wirework
300 Pull Out Base
300mm Dynamic Pull Out Base
Features:

Cabinet width: 300mm
Minimum internal cabinet depth: 450mm
 Soft close mechanism
 25kg loading capacity

CODEDESCRIPTION
69DYN002
14
300 DYNAMIC PULL OUT BASE
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Serie Gold - Gold Range
Art. 1102
32
9
9
L
32
9
(ext)
484
224
374
444,5
493,5
22,5
12
22,5
9
12
Cestello estraibile due piani con portabottiglie
Extractable basket with two shelves and bottle rack
A
B
Larghezza / Width
Profondità / Depth
1102 Y / 30 - 50 C
Optional
Y: Soft-Closing
45
50
Finitura / Finish
C
Cesto Cromato / Chromed Basket
B [mm]
264
314
364
414
564
o Total estractable guides
o Basket load capacity: 25 kg
o Galvanic Chromium Plating without toxic residues
o Injection molded ABS guide covers
o Metal bar material: Iron Fe360 different diameters
o Soft closing as optional
Main
Features
o Estrazione Guida Totale
o Portata cesto: 25kg
o Cromatura Galvanica con assenza totale di residui tossici
o Copriguida in ABS Stampati ad iniezione
o Materiale Tondino metallico: Ferro Fe360 vari diametri
o Soft close su richiesta
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Il prodotto è adatto ad usi alimentari. Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
Product is suitable for alimentary purposes. See ASSEMBLY INSTRUCTIONS of product installation.
Caratteristiche
Principali
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
15
L (cm)
30
35
40
45
60
A [mm]
458
558
Documento NR.
060/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
14/09/2012
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
 ­ 












INSERIMENTO KIT DI REGOLAZIONE SU ANTA.
Insert adjustment kit onto the door
16

­
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Elite Soft Closing Wirework
300 Pull Out Base
300mm Elite Pull Out Base
Features:

Cabinet width: 300mm
Minimum internal cabinet depth: 455mm
 Soft close mechanism
 40kg loading capacity

CODEDESCRIPTION
69ELITE002
17
300 ELITE PULL OUT BASE
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Ellite
Cestello estraibile due piani con portabottiglie
Extractable basket with two shelves and bottle rack
Art. 5102E
L
30
9
43
9
(ext)
62
9
14
44
14
9
10,9
201
448
B
5
FILO OVALE
Oval Wire
15
30
n4
370
521
STAFFE ANTA
Door Brackets
483 `3
321
10
11
11
C
5102E Y / 30-45 P C B
Imballo singolo
Single packaging
Caratteristiche
Principali
Main
Features
Finitura Ripiano
Shelf Finishing
G: Grigio / Grey
B: Bianco / White
T: Titanio / Titanium
V: Vetro / Glass
Finitura Cestello
Basket Finishing
C: Cromo / Chromed
N: Champagne
T: Titanio / Titanium
o Ripiano in multistrato melaminico, Bianco o Grigio
o Possibilià di ripiano in Vetro
o Ripiano in Titanio disponibile solo con struttura in Titanio e
viceversa
o Struttura in filo ovale 10x5
o Equipaggiato con n.2 guide sfalsate GRASS Dynamic XP
o Sistema Soft-closing di serie
o Portata [kg]: 40
Larghezza / Width
L [mm] A [mm]
30
300
264
40
400
364
45
450
414
50
500
464
60
600
564
B [mm]
257
357
407
457
557
C [mm]
235
335
387
435
535
o Melamine multilayer shelves, white or grey
o Possibility of Glass shelves
o Titanium shelf available only with Titanium structure and
vice-versa
o Oval iron 10x5 wire structure
o Equipped with n.2 GRASS Dynamic XP staggered slides
o Soft-closing system as standard
o Capacity [kg]: 40
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
18
A
451`3
Documento NR.
090/2013
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
04/10/2013
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
19
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
20
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic Wirework
Genius - Pull Out Shelves With Anti Slip Trays
Genius - Pull Out GREY Shelves with Anti-Slip Trays
Features:





Access hard to reach areas without unnecessary
bending or exertion
Patented system with quick & easy installation
Anti-slip grey shelves with chrome rails
Each shelf moves independently
Shelf height: 60mm
Cabinet
Door
Depth
Width
Height
Capacity
900/1000mm
450/500
485
865
645-680
15kg/shelf
CODEDESCRIPTION
69DYN019
69DYN018
LH GENIUS-LH DOOR/RH BLANK
RH GENIUS-LH DOOR/LH BLANK
INSTALLATION VIDEO
You can view a video showing how to install this product at
the website below:
http://www.tkcomponents.co.uk/genius.php
IMPORTANT PLEASE NOTE:
If you already have a video showing how to install the
product we strongly advise that you refer to the printed
fitting instructions that accompany the wirework that you
have received to ensure that the video matches it before you
install the product.
The printed fitting instructions that accompany the wirework
that you have received will be up to date and you should
always refer to this if there are any differences between the
video and the printed fitting instructions.
Please note: The base is GREY and
not white as shown in the image
21
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Codice Articolo – Part Number
835W
Caratteristiche principali
•
•
•
•
•
Vassoi ad estrazione totale fuori
dal mobile
Vassoi utilizzabili separatamente
per un uso ottimale
Per mobili ad angolo con anta 45 /
50 / 60 cm
Portata 15 Kg per vassoio
Altezza mobile H=700 mm
Main Features
•
•
•
•
•
Sinistro - Left
Trays extend completely out of
the unit
Separately usable trays for
optimum use
For corner units with 45 / 50 / 60
cm doors
Capacity 15 Kg per tray
Unit height H=700 mm
Destro - Right
Profondità interna Mobile
Internal Unit depth
Larghezza interna Mobile
Internal Unit Width
Anta Mobile
Unit door
B [mm]
W [mm]
A [mm]
> 865
450
> 1015
600
> 485
Finitura Vassoio
Tray Finish
Codice
Code
Grigio
Grey
Bianco
White
Grigio Antiscivolo
Grey Anti-Slip
Bianco Antiscivolo
Grey Anti-Slip
Grigio
Grey
Bianco
White
Grigio Antiscivolo
Grey Anti-Slip
Bianco Antiscivolo
Grey Anti-Slip
835W/DX45G
835W/SX45G
835W/DX45B
835W/SX45B
835WAS/DX45G
835WAS/SX45G
835WAS/DX45B
835WAS/SX45B
835W/DX60G
835W/SX60G
835W/DX60B
835W/SX60B
835WAS/DX60G
835WAS/SX60G
835WAS/DX60B
835WAS/SX60B
Ufficio Tecnico INOXA s.r.l.
Via dell’Industria 28/30 – 60020 Polverigi (AN) – www.inoxa.it
22
Tel 0161 336 3636
free fax 0808 144 2422
Revisione
01
Data Emissione
12-10-2010
web www.tkcomponents.co.uk
EMAIL [email protected]
Art. I N D I C A Z I O N I D I M O N TA G G I O
835 A S S E M B LY I N S T R U C T I O N S
F
Contenuto della confezione - BOX CONTENT
A : Supporto inferiore / bottom support
B : Tubo / pole
C : braccio / arm
D : Ripiano / shelf
E : supporto superiore / top support
F : piastra di aggancio / hook plate
G : perno / pin
H : clip / clip
I : viti - screws
L : blocco di sicurezza / safety block
5
min
TEMPO
MONTAGGIO
ASSEMBLY
TIME
G
E
Nr.2
C
H
Nr.2
I
Nr.4
B
L
A
D
Carico massimo per ogni ripiano Kg.15
Maximum load per shelf kg. 15
E’ consigliato per evitare la flessibilità della base del
mobile, l’uso di un piedino centrale (P), in
linea con il supporto inferiore del Genius (A).
(=)
P
(=)
In order to maintain the cabinet base stability, we
recommend the use of an extra central foot (P) in
line with the Genius bottom support (A).
INOXA S.r.l
Via dell' Industria, 28
60020 POLVERIGI (AN) ITALY
Tel. +39 071 906324 - 906090 Fax +39 071 906096
http: www.inoxa.it
e-mail: [email protected]
23
Tel 0161 336 3636
free fax 0808 144 2422
Pag.1
web www.tkcomponents.co.uk
EMAIL [email protected]
1
F
Fissare il supporto inferiore (A)
alla base del mobile e la piastra
di aggancio (F) alla parete frontale.
Utilizzare le viti pre-posizionate
rispettando le distanze come da disegni.
F
Fix the bottom support (A)
onto the base of the cabinet and
the hook plate (F) onto the front wall.
Use the pre-fitted screws,
respecting the distances,
as shown in the drawings.
A
A
A
Mobile senza montante.
Cabinet without upright.
18
18
Mobile con montante.
Cabinet with upright.
Mobile / Cabinet Anta / Door Quota / Size
900-1000
450
450
600
1200
3
2
Infilare il perno (G) nel primo
foro in basso del tubo (B) fino a battuta.
600
Inserire il braccio (C) nel tubo fino
a fissarlo sul perno (G).
Insert the arm (C) into the pole
until it is fixed into the pin (G).
Insert the pin (G) into the lower
hole of the pole (B) until it stops.
C
B
G
G
G
Assicurarsi di accoppiare il
perno (G) nella sede come disegno.
Make sure the pin (G) is correctly
placed as shown in the drawing.
Pag.2
24
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
4
5
E
H
H
H
C
G
B
G
H
Posizionare il secondo perno (G) in uno dei fori all'altezza desiderata ed
infilare il secondo braccio (C) fino a bloccarlo sul perno come in precedenza.
Inserire la seconda clip (H) in uno dei fori in modo
da bloccare la posizione del secondo braccio.
Inserire il supporto superiore (E).
Inserire la clip (H) nel foro del tubo in modo
da bloccare la posizione del braccio (C).
In order to block the arm position (C),
place the clip (H) into the hole of the pole.
6
Place the second pin (G) in one of the holes at the desired height
and insert the second arm until ti is fixed into the pin, as before
Insert the second clip (H) into one of the holes to block
the position of the second arm.
Insert the top support (E).
7
F
E
Incastrare il supporto alto (E) alla piastra
di aggancio (F) fissata in precedenza sul
mobile. L’incastro fra il supporto (E) e la
piastra di aggancio (F) può avvenire o con
inserimento a baionetta o tramite una
leggera pressione frontale.
Fissare il supporto alto (E) al mobile
mediante le n.4 viti pre-posizionate.
In caso di posizionamento del supporto
superiore al massimo dell’altezza è
consigliabile l’utilizzo di altre n.4 viti (I)
in dotazione per il fissaggio al top.
Fit the top support (E) onto the hook
plate (F) previously fixed on the cabinet.
The joint between the top support (E)
and the hook plate (F) can be made by
bayonet coupling or by front pressure.
Fix the top support (E) to the cabinet
using the pre-fitted 4 screws (I)
To position the top support at the
maximum height, we suggest the use of
4 more screws (I), supplied to fix it to the top.
E
E
Inserire il piede del tubo nel
supporto inferiore.
Insert the foot of the pole into
the lower support
Pag.3
25
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
8
M
D
Ruotare i bracci fino a fondo corsa e
ruotare il componente di blocco (M).
Montare i ripiani (D) sui bracci facendo
scorrere i profili al di sotto di essi sulle ruote.
Rotate arms until end-run, then rotate
the interlock component (M).
Assemble the shelves on the arms by sliding the
profiles beneath the shelf on the wheels.
Premere il cursore ed estrarre
i ripiani per la pulizia.
9
CURSORE
LOCK
Push the lock and pull out
the shelves for cleaning.
CLICK
In caso di trasporto si
raccomanda di inserire il
blocco di sicurezza (L)
per impedire
la rotazione del ripiano.
Il blocco di sicurezza (L)
deve essere rimosso
prima dell’uso.
CLICK
Spingere i ripiani a fondo corsa, fino al “click” del cursore,
in modo da bloccare l’uscita del ripiano.
Spingere i ripiani e ruotarli fino a farli entrare
completamente nel mobile.
Push the shelves until the end-run and the lock
clicks to block the shelf out.
Push the shelves and rotate them until they fit
completely into the cabinet.
In case of transfer we
recommend to apply the
safety block (L) to prevent
the rotation of the shelf.
The safety block (L) must
be removed before use.
L
Pag.4
26
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic / Elite Soft Closing Wirework
Dynamic / Elite Corner Unit
Dynamic Corner Unit - Includes Chrome Wire Baskets
Elite Corner Unit - Inc. Baskets With a Solid Titanium Base
Features:
Features:


Patented gas assisted piston to enable unique
soft close and easy open action
 Easy installation - only 3 moving parts
 35kg loading capacity divided between 4 baskets
 Minimum door size: 450mm




Patented gas assisted piston to enable unique
soft close and easy open action
Easy installation - only 3 moving parts
35kg loading capacity divided between 4 baskets
Minimum door size: 450mm
Baskets have a TITANIUM base with a complimentary Titanium trim.
Cabinet
Depth
Width
Height
Capacity
Cabinet
Depth
Width
Height
Capacity
900mm
485/560
860
640-800
35kg
900mm
485/560
860
640-800
35kg
CODEDESCRIPTION
CODEDESCRIPTION
69DYN020
69DYN021
69ELITE005
69ELITE006
LH UNIT-LH DOOR/RH BLANK
RH UNIT-LH DOOR/LH BLANK
RH UNIT-LH DOOR/RH BLANK
LH UNIT-LH DOOR/LH BLANK
NEW & IMPROVED
Now Includes a new integrated bumper for improved soft closing action
NOTE: When fitting this product on Handleless doors please ensure that the door bracket is fitted away from the handle groove
to avoid the screw holes showing through.
DYNAMIC
CORNER UNIT
27
ELITE
CORNER UNIT
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Meccanismi - Mechanisms
Art. 803
DYNAMIC CORNER
803A
H (min - max)
803BW
520
340
SINISTRO
Left
803 B (W) (AS) / SX C
Optional:
AS: anti-scivolo / anti-slip
Min 450
Altezza / Height:
Verso / Side:
SX: sinistro / left
DX: destro / right
Tipo di Cesto / Basket Type:
W: fondo in legno / wooden base
Caratteristiche
Principali
Main
Features
Finitura Cesto / Basket Finishing
Cesto in filo / wire basket:
C: cromato / chromed
G: verniciato / painted
Fondo in legno / wooden base
B: bianco / white
G: grigio / grey
o Guide a sfere
o Portata 35 kg
o Soft Close di serie
o Cestello in filo cromato, verniciato o con fondo in
legno su richiesta
o Finitura ripiano in legno Grigia o Bianca
o Cromatura Galvanica senza residui tossici
o Verniciatura epossidica non tossica
o Optional trattamento legno Anti-scivolo
Code
A
B
H [mm] Min-Max
1100 - 1260
640 - 800
N.Cesti / n.Baskets:
A
B
4+4
2+2
o Ball guides
o Load Capacity: 35 kg
o Soft-close as standard
o Chromed or Painted wire baskets or wooden
base on request
o Wooden shelf finishing White or Grey
o Galvanic chromium plating without toxic residues
o Not-toxic thermosetting epoxy coating
o Anti-slip wood treatment available as optional
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
28
Min 40
Min 485
860
Documento NR.
048/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
05/11/2012
Rev.
02
web www.tkcomponents.co.uk
EMAIL [email protected]
29
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
…†‡







  
­
€‚
ƒ­
„

ƒ
­ˆ
30
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]



 


……
„
 


­
 



­
 €
 ‚ƒ€

†
31
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]


 

­


€
­
‚
ƒ„­…
…­„­
‚
†­
‡
†
­
‡ 
†
ˆ‰Š
†
ˆ ‰ Š
32
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Elite Soft Closing Wirework
Elite Pantry Unit
Elite Pantry Unit - Includes Titanium Baskets
Features:

Soft close action
Minimum internal cabinet depth: 450mm
 Includes 5 Baskets (recommended max loading
12KG / each basket)
 Titanium wire baskets with a SOLID Titanium base.

Cabinet
Depth
Width
Height
Capacity
450/500mm
448
349
1830-2250
100kg
CODEDESCRIPTION
69ELITE003
450 / 500mm
ELITE PANTRY UNIT
NOTE: When fitting this product on Handleless doors please
ensure that the door bracket is fitted away from the handle groove
to avoid the screw holes showing through.
ELITE PANTRY UNIT
TITANIUM BASKETS
33
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Meccanismi - Mechanisms
Art. 860
Colonna telescopica ad accesso totale - Total access telescopic column
65
178
5
448
25
B
L
H
(ext)
~150°
860 A / 45 T G
Caratteristiche
Principali
Main
Features
Finitura Ripiano
Shelf Finishing
G: Grigio / Grey
B: Bianco / White
V: Vetro / Glass
Finitura Cestello
Basket Finishing
C: Cromo / Chromed
N: Champagne
T: Titanio / Titanium
o Guide a sfera
o Cestelli in filo Ovale sezione 10x5, cromati, nichelati
champagne o finitura titanio
o Struttura in ferro verniciato RAL7035
o Estrazione ed accesso totale
o Portata Guida: 110
o Soft Close di serie
45
60
L [mm]
450
600
H max [mm]
2250
B [mm]
349
499
o Ball slides
o Oval wire 10x5 section baskets, chromed or nichel
treatment, champagne or titanium
o RAL 7035 Painted Iron Structure
o Total Extraction and Access
o Slide Capacity: 110 kg
o Soft-close as standard
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
34
Altezza - Height
H min [mm]
1830
A
Larghezza - Width
Documento NR.
092/2013
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
09/10/2013
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
35
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
36
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
37
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
38
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
39
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
40
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
41
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
42
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
43
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
44
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
45
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
46
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic / Elite Soft Closing Wirework
Dynamic / Elite Tall Larder
Dynamic Tall Larder - Includes Chrome Baskets
Dynamic Tall Larder - Includes Metallic Grey Baskets
Features:
Features:


NEW improved Gas piston (x2) assisted soft close action
Includes 5 Baskets (recommended max loading
15KG / each basket)
 Chrome wire baskets.

NEW improved Gas piston (x2) assisted soft close action
Includes 5 Baskets (recommended max loading
15KG / each basket)
 Powder coated metallic grey wire baskets.

Cabinet
Depth
Width
Height
Capacity
Cabinet
Depth
Width
Height
Capacity
500mm
600mm
437
437
446
546
1835-2185
1835-2185
100kg
100kg
300mm
400mm
437
437
246
346
1835-2185
1835-2185
100kg
100kg
CODEDESCRIPTION
CODEDESCRIPTION
69DYN052
69DYN054
69DYN050
69DYN051
500mm DYNAMIC TALL LARDER
600mm DYNAMIC TALL LARDER
300mm DYNAMIC TALL
LARDER, MET GREY BASKETS
400mm DYNAMIC TALL
LARDER, MET GREY BASKETS
NEW & IMPROVED
Now Includes a new integrated bumper for improved
soft closing action
NOTE: When fitting this product on Handleless doors please
ensure that the door bracket is fitted away from the handle groove
to avoid the screw holes showing through.
IMPORTANT PLEASE NOTE:
We recommend that you refer to the printed FITTING
INSTRUCTIONS that accompany the wirework that you
have received before any installation. Please pay particular
attention to SECTIONS 4 and 5.
We have recently updated these products and the fitting
instructions are different to the earlier model. We therefore
strongly advise that you refer to the printed
fitting instructions that accompany the wirework
that you have received before you install the
product.
Video
You can view a video showing how to install this product at
the website below:
http://www.tkcomponents.co.uk/larder.php
If you already have a video showing how to install the
product we strongly advise that you refer to the printed
fitting instructions that accompany the wirework that you
have received to ensure that the video matches it before you
install the product.
DYNAMIC
TALL LARDER
CHROME BASKETS
47
DYNAMIC
TALL LARDER METALLIC
GREY BASKETS
The printed fitting instructions that accompany the wirework
that you have received will be up to date and you should
always refer to this if there are any differences between the
video and the printed fitting instructions.
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic / Elite Soft Closing Wirework
Dynamic / Elite Tall Larder
Elite Tall Larder - Includes Titanium Baskets
Features:

NEW improved Gas piston (x2) assisted soft close action
Includes 5 Baskets (recommended max loading
15KG / each basket)
 Titanium wire baskets with a SOLID Titanium base.

Cabinet
Depth
Width
Height
Capacity
300mm
437
246
1835-2185
100kg
CODEDESCRIPTION
69ELITE004
300mm ELITE TALL LARDER
NEW & IMPROVED
Now Includes a new integrated bumper for improved
soft closing action
NOTE: When fitting this product on Handleless doors please
ensure that the door bracket is fitted away from the handle groove
to avoid the screw holes showing through.
IMPORTANT PLEASE NOTE:
We recommend that you refer to the printed FITTING
INSTRUCTIONS that accompany the wirework that you have
received before any installation. Please pay particular attention
to SECTIONS 4 and 5.
We have recently updated these products and the fitting
instructions are different to the earlier model. We therefore
strongly advise that you refer to the printed
fitting instructions that accompany the wirework
that you have received before you install the
product.
Video
You can view a video showing how to install this product at
the website below:
http://www.tkcomponents.co.uk/larder.php
If you already have a video showing how to install the product
we strongly advise that you refer to the printed fitting
instructions that accompany the wirework that you have
received to ensure that the video matches it before you install
the product.
The printed fitting instructions that accompany the wirework
that you have received will be up to date and you should
always refer to this if there are any differences between the
video and the printed fitting instructions.
48
ELITE TALL LARDER
TITANIUM BASKETS
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Meccanismi - Mechanisms
Art. 850
Colonna telescopica ad estrazione totale - Total extraction telescopic column
L
max
360
(ext)
Art. 1204W
H
(int)
H
D
Art. 1816
Art. 816ST
9
(int, max)
Staffe Anta
Door Brackets
4,5
B
P
850 A / 30 - 50 G
Larghezza - Width
L [cm]
W [mm]
30
246
40
346
45
396
50
446
60
546
W
B [mm]
232
332
382
432
532
Profondità - Depth
D [cm]
P [mm]
45
437
50
487
Cod.
A - Alta/High
M - Media/Medium
B - Bassa/Low
S - Small
Main
Features
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
H min
[mm]
1835
1490
1145
800
H Max
[mm]
2185
1840
1495
1150
Cesti /
Baskets *
5
4
3
2
* Cesti cod. 1204W con piano in legno oppure cod. 1816 in filo cromato
Possibilità di montaggio cesto aggiuntivo su parte telescopica
Baskets with wooden deck: cod.1204W or Chromed wire: cod. 1816
Additional basket can be installed on telescopic part
o Guide a sfere
o Estrazione totale
o Portata Guida: 110 kg
o Soft Close di serie
o Cestelli forniti separatamente
Caratteristiche
Principali
49
Altezza - Height
o
o
o
o
o
Ball Slides
Total Extractions
Slide Capacity: 110 kg
Soft-close as standard
Basket supplied separately
Documento NR.
053/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Revisione
09/09/2013
Rev.
03
web www.tkcomponents.co.uk
EMAIL [email protected]
50
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
51
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
52
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
PLEASE PAY PARTICULAR ATTENTION TO THIS SECTION
53
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
54
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
55
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
56
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
57
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
77
A(1:4)
9
4,5
A
L
A

A [mm]
232
332
382
432
532
125
820*
L [mm]
300
400
450
500
600
* QUOTA CONSIGLIATA
IN CASO DI COLONNA ALTA
art. 816TA
Responsabile:
Roberto Trombettoni
Redatto da
Emanuele Silvi
DISEGNO - FILE
FOR-ST816.idw
Descrizione
Data
SCALA
1:10
14/06/2012
CODICE DISEGNO
Tel 0161 336 3636
free fax 0808 144 2422
Colore Master
FOR-ST816
FORATURA STAFFE COLONNE 816
58
Materiale
REVISIONE
0
Foglio
1
/ 1
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic Soft Closing Wirework
Dynamic Mid Height Larder
Dynamic Mid Height Larder - Includes Wire Baskets
Features:
 Cabinet width: 300 / 500mm
 Includes 3 baskets (recommended max loading
15KG / each basket)
 Minimum internal cabinet depth: 450mm
 Soft close mechanism
Cabinet
Depth
Width
Height
Capacity
300mm
500mm
437
437
246
446
1145-1495
1145-1495
100kg
100kg
NEW & IMPROVED
Now Includes a new integrated bumper for improved
soft closing action
NOTE: When fitting this product on Handleless doors please
ensure that the door bracket is fitted away from the handle
groove to avoid the screw holes showing through.
CODEDESCRIPTION
69DYN057
69DYN058
300mm DYNAMIC MID HEIGHT LARDER (Powder Coated Metallic Grey Baskets)
500mm DYNAMIC MID HEIGHT LARDER (Chrome Baskets)
IMPORTANT PLEASE NOTE:
We recommend that you refer to the printed FITTING
INSTRUCTIONS that accompany the wirework that you
have received before any installation. Please pay particular
attention to SECTIONS 4 and 5.
We have recently updated these products and the fitting
instructions are different to the earlier model. We therefore
strongly advise that you refer to the printed
fitting instructions that accompany the wirework
that you have received before you install the
product.
Video
You can view a video showing how to install this product at
the website below:
http://www.tkcomponents.co.uk/larder.php
If you already have a video showing how to install the
product we strongly advise that you refer to the printed
fitting instructions that accompany the wirework that you
have received to ensure that the video matches it before you
install the product.
The printed fitting instructions that accompany the wirework
that you have received will be up to date and you should
always refer to this if there are any differences between the
video and the printed fitting instructions.
59
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Meccanismi - Mechanisms
Art. 850
Colonna telescopica ad estrazione totale - Total extraction telescopic column
L
max
360
(ext)
Art. 1204W
H
(int)
H
D
Art. 1816
Art. 816ST
9
(int, max)
Staffe Anta
Door Brackets
4,5
B
P
850 A / 30 - 50 G
Larghezza - Width
L [cm]
W [mm]
30
246
40
346
45
396
50
446
60
546
W
B [mm]
232
332
382
432
532
Profondità - Depth
D [cm]
P [mm]
45
437
50
487
Cod.
A - Alta/High
M - Media/Medium
B - Bassa/Low
S - Small
Main
Features
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
H min
[mm]
1835
1490
1145
800
H Max
[mm]
2185
1840
1495
1150
Cesti /
Baskets *
5
4
3
2
* Cesti cod. 1204W con piano in legno oppure cod. 1816 in filo cromato
Possibilità di montaggio cesto aggiuntivo su parte telescopica
Baskets with wooden deck: cod.1204W or Chromed wire: cod. 1816
Additional basket can be installed on telescopic part
o Guide a sfere
o Estrazione totale
o Portata Guida: 110 kg
o Soft Close di serie
o Cestelli forniti separatamente
Caratteristiche
Principali
60
Altezza - Height
o
o
o
o
o
Ball Slides
Total Extractions
Slide Capacity: 110 kg
Soft-close as standard
Basket supplied separately
Documento NR.
053/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Revisione
09/09/2013
Rev.
03
web www.tkcomponents.co.uk
EMAIL [email protected]
61
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
62
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
63
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
PLEASE PAY PARTICULAR ATTENTION TO THIS SECTION
64
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
65
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
66
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
67
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
68
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
77
A(1:4)
9
4,5
A
L
A

A [mm]
232
332
382
432
532
125
820*
L [mm]
300
400
450
500
600
* QUOTA CONSIGLIATA
IN CASO DI COLONNA ALTA
art. 816TA
Responsabile:
Roberto Trombettoni
Redatto da
Emanuele Silvi
DISEGNO - FILE
FOR-ST816.idw
Descrizione
Data
SCALA
1:10
14/06/2012
CODICE DISEGNO
FOR-ST816
FORATURA STAFFE COLONNE 816
69
Tel 0161 336 3636
free fax 0808 144 2422
Materiale
Colore Master
REVISIONE
0
Foglio
1
/ 1
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic Wirework
Soft Closing Pull Out Basket
Dynamic Soft Closing Pull Out Basket (Chrome Baskets)
Features:

Cabinet width: 300 / 400 / 500 / 600 / 800 / 1000mm
 Minimum internal cabinet depth: 475mm
 Soft close mechanism
 20kg loading capacity
Cabinet
Depth
Width
Capacity
300mm
400mm
500mm
600mm
800mm
1000mm
470
470
470
470
470
470
264
364
464
564
764
964
20kg
20kg
20kg
20kg
20kg
20kg
CODEDESCRIPTION
69DYN040
69DYN041
69DYN042
69DYN043
69DYN044
69DYN045
300mm DYNAMIC SOFT CLOSING PULL OUT BASKET
400mm DYNAMIC SOFT CLOSING PULL OUT BASKET
500mm DYNAMIC SOFT CLOSING PULL OUT BASKET
600mm DYNAMIC SOFT CLOSING PULL OUT BASKET
800mm DYNAMIC SOFT CLOSING PULL OUT BASKET
1000mm DYNAMIC SOFT CLOSING PULL OUT BASKET
Please note that the plastic
covers are light grey and not
white as shown in this image
70
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Serie Quadro - Quadro Range
Cestello Portapentole ad estrazione manuale con distanziale/i
Manual Extractable basket with spacer(s)
Art. 2202D
30
L
172
(ext)
Distanziale
Spacer
n6,3
14
9
9
C
8
12
233
9
332
466,5
21,5
42,5
14
9
A
15
B
Finitura / Finish
2202 D Y / 40 - 50 P C
C
Larghezza / Width
Cromato / Chromed
Profondità / Depth
Optional
Y: Soft-Close
Caratteristiche
Principali
Main
Features
50
o Estrazione Guida Parziale Maggiorata
o Portata statica Guida: 245 N (25kg)
o Portata dinamica Guida: 196 N (20 kg)
o Cromatura Galvanica con assenza totale di residui tossici
o Materiale Tondino metallico: Ferro Fe360, vari diametri
C [mm]
444
B (cm)
264
364
394
464
564
o Partially Increased estractable guides
o Static load limit: 245 N (25kg)
o Dynamic load limit: 196 N (20 kg)
o Galvanic Chromium Plating without toxic residues
o Metal bar material: Iron Fe360, different diameters
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Il prodotto è adatto ad usi alimentari. Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
Product is suitable for alimentary purposes. See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
71
A [mm]
470
L (cm)
30
40
45
50
60
Documento NR.
101/2014
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
21/05/2014
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
72
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Dynamic Wirework
Under Sink Pull Out
Dynamic Under Sink Pull Out
Features:

Cabinet width: 1000mm
Minimum internal cabinet depth: 450mm
 Soft close mechanism
 Includes tray
 25kg loading capacity

CODEDESCRIPTION
69DYN013
73
DYNAMIC U SHAPED PULL OUT
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
SCHEDA TECNICA DI PRODOTTO
Product Tech Datasheet
(in ottemperanza alla Legge 126/91 e al D.L. 101/97)
Serie Gold - Gold Range
Art. 1207
Cestello Cassetto sottolavello
Undersink drawer basket
102
191
12
174
174
L
(ext)
A
321
C
178
32
9
12
22,5
9
12
32
9
9
444,5
493,5
224
22,5
B
1202 S Y / 30 - 50 C
Optional
Y: Soft-Closing
Caratteristiche
Principali
Main
Features
Larghezza / Width
L (cm)
90
100
120
Finitura / Finish
C
Cesto Cromato / Chromed Basket
o Estrazione Guida Totale
o Portata cesto: 25kg
o Cromatura Galvanica con assenza totale di residui tossici
o Copriguida in ABS Stampati ad iniezione
o Materiale Tondino metallico: Ferro Fe360 vari diametri
B [mm]
864
964
1164
C [mm]
516
616
816
o Total estractable guides
o Basket load capacity: 25 kg
o Galvanic Chromium Plating without toxic residues
o Injection molded ABS guide covers
o Metal bar material: Iron Fe360 different diameters
Manutenzione
Maintenance
Pulire con un panno morbido ed asciutto. Evitare l'uso di solventi e/o abrasivi.
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
Istruzioni d'uso
Use manual
Il prodotto è adatto ad usi alimentari. Consultare le INDICAZIONI DI MONTAGGIO per l'installazione del prodotto.
Product is suitable for alimentary purposes. See ASSEMBLY INSTRUCTIONS of product installation.
Ufficio Tecnico INOXA s.r.l.
Via dell'Industria 28/30 - 60020 Polverigi (AN) - www.inoxa.it
74
Profondità / Depth
A [mm]
45
458
50
508
Documento NR.
043/2012
Tel 0161 336 3636
free fax 0808 144 2422
Data Emissione
28/06/2012
Rev.
01
web www.tkcomponents.co.uk
EMAIL [email protected]
 ­€
12
35,5

Da utilizzare sui mobili con fianco 16mm.
Designed for 16 mm side panel thickness






75


­
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Area Sales
TK Components
Cranberry Drive
Denton
Manchester
M34 3UL
Telephone
Fax
Free-Fax
Email
Web
0161 336 3636
0161 336 3638
0808 144 2422
[email protected]
www.tkcomponents.co.uk
North West 07584 241838
Merseyside & Cheshire 07970 923474
North East & Scotland 07766 021114
Yorkshire 07976 643485
Midlands 07899 948786
South West 07799 320910
London & South East 07823 442668
South London and Southern Counties 07792 078830
Northern Ireland 07436 160980
All goods are sold subject to our Terms and Conditions
of Sale which are available upon request.
IMPORTANT PLEASE NOTE:
The information contained in this section is for illustrative purposes only to assist choosing your
desired kitchen. While we endeavour to keep the information up to date and correct we do not make
any representations or warranties of any kind, express or implied, about the completeness, accuracy,
reliability and suitability of the doors and products that appear in this section.
We aim to showcase as many different items as possible and therefore some products have
been installed and photographed purely to show as many of our products features as possible
and they should not be taken as an example of how they are intended to be installed in real
kitchen installations.
IT IS THEREFORE THE RESPONSIBILITY OF THE INSTALLER TO CHECK THE CORRESPONDING
MANUFACTURER’S INSTALLATION INFORMATION AND THE MANUFACTURER’S TECHNICAL
INFORMATION TO ENSURE THIS IS UP TO DATE AND TO ENSURE THAT THE PRODUCTS CAN BE FITTED
IN A WAY THEY ARE DISPLAYED AND THE PRODUCTS ARE SUITABLE FOR YOUR REQUIREMENTS.
We specifically exclude any liability in this regard unless the products are fitted in accordance with
the specifications we supply and the manufacturer’s installation recommendations and are used
in a way recommended by the manufacturer and in accordance with the manufacturer’s technical
information provided.
The information shown in this literature is accurate as at the date of print/release shown on such
information but it may be subject to changes after such date. Please therefore ensure that you
are viewing the most current product available and check with us if you have any doubt about the
suitability of the product or accuracy of the information shown.
Finally we are proud that all our products that we sell are guaranteed for a period of 12 months but this
does not stop all our products naturally ageing overtime. As a result of this natural aging process we are
therefore unable to provide an identical colour finish to the existing products you have purchased from
us with any products that we supply you from the same product line. In such event our liability will be
limited to the purchase price paid for the product you are seeking to replace.
Often products get updated and the fitting instructions are different to the earlier model. WE
THEREFORE STRONGLY ADVISE THAT YOU REFER TO THE PRINTED FITTING INSTRUCTIONS THAT
ACCOMPANY THE WIREWORK THAT YOU HAVE RECEIVED BEFORE YOU INSTALL THE PRODUCT.
If you have a video showing how to install the product we strongly advise that you refer to the printed
fitting instructions that accompany the wirework that you have received to ensure that the video
matches it before you install the product. The printed fitting instructions that accompany the wirework
that you have received will be up to date and you should always refer to this if there are any differences
between the video and the printed fitting instructions.
76
Tel 0161 336 3636
free fax 0808 144 2422
web www.tkcomponents.co.uk
EMAIL [email protected]
Scarica

9 - TKC