Pressure vessel engineering
Filtration solutions for Oil&Gas
DB Progetti S.r.l.
Company Profile
DB PROGETTI S.r.l. Sede legale: via Carducci n. 19 – 20123 MILANO - Sede operativa: via Brallo n.19 – 27010 SIZIANO (PV)
C.F./P.IVA 01993250180 - Capitale sociale euro 50.000,00 i.v. - R.E.A. MI – 1705419 - REGISTRO IMPRESE
DB Progetti is a small private company based near Milan, we provide pressure
vessel engineering and our core buisness is produce special internal parts for
petrolchemical industries and gas filtration.
We perform design calculations, design by formula (DBF) and design by
analysis (DBA), Feasibility / advanced design, construction drawings and
production of pressure vessel(cyclones bundles, vane pack, cartridges filters)
The main activities are:
Design, construction and testing:
- Design and development of 2D and 3D technical drawings,
solid Modeling
- Development layout and GA package
- Calculations of pressure vessels, filters, fasteners in accordance with ASME,
AS , B.S. , T.E.M.A. , A.P.I. , AD2000, GOST, etc. PED97/23
NDT inspections:
- Liquid penetrant, Magnaflux, Ultrasound, SMEs
- Internal staff with qualifications III / II ° level. SNT TC 1A
Technical advice:
- Support for the achievement of ISO9000 and ASME STAMP "U" third-party testing:
- Italy testing agency TUV certified according to PED 97/23 CE and Material certification 3.2
PALL
DB PROGETTI for mechanical design makes use of certified software and
comes with regular license and maintenance contracts, also the software is
validated in accordance with the relevant standards.
Below is a list of software used by DB Projects:
Pv Elite
MT comp
Software Sant’Ambrogio
Advanced pressure vessel
Pro_sap
Caesar
Esa pro 3D / Esa pro iso
Autocad
Solid works/Cosmos
Pressure vessel calculations
Pressure vessel calculations
Pressure vessel calculations
Pressure vessel calculations
Structural calculations
Piping stress analysis
3D modeler and 3D piping lay-out
Technical drawings 2D
Finit elements analysis
PALL
PALL
FILTRATION
Decades of experience of our technicians has
enabled us to achieve excellent results in the design
and construction of equipment. Excellent knowledge
of the process allows us to recommend the right
solution for the separation and filtration of gas.
The range of equipment that DB Projects is able to
provide, rangs from the inside of the filter (plate
cartridges full of filter elements, vane pack lamellar
separation, cyclones bundle and separators
demister), the production of the filter.
PALL
MINI CYCLONES
The cyclonic separator is the ideal solution for
removing solid and liquid particles from a gaseous
stream, allowing a high separation efficiency
combined with a constant pressure drop with no
maintenance.
PALL
EFFICIENCY ACCORDING TO PARTICLES SIZE
Efficiency particle size: > 8 microns 100%
Please find below the Efficiency Curve:
Curve 6: 60 ACFM
Curve 5: 50 ACFM
Curve 4: 40 ACFM
Curve 3: 30 ACFM
Curve 2: 20 ACFM
Curve 1: 10 ACFM
PALL
VANE PACK
The separator vane pack is the ideal solution for removing
liquid particles from a gaseous stream, allowing a high
separation efficiency combined with a minimum pressure
drop constant, with no maintenance. They are used in gas
separation at the entrance of the plant for the treatment of
fuel gas and upstream gas turbines or turbochargers to
protect them.
PALL
EFFICIENCY ACCORDING TO PARTICLES SIZE
Efficiency particlePARTICLES
size: > 8-10SIZE
microns 100%
Please find below the Efficiency Curve:
Alcune nostre realizzazioni:
Coalescer cartridge support plate for
Pall Seprasol Plus, Skid Gas N.P.
Bari(Italy)
Coalescent plate for 420
elements dia. 5,5 mt
diff. Press.3,5 barg
Cyclones bundle dia.1800 mm
Alcune nostre realizzazioni:
Amine Treatment Plant Engineering
Engineering Gas treatment plant
Alcune nostre realizzazioni:
QUICK OPENING CLOSURE
DB PROGETTI is able to design and build quick opening closure in
accordance with ASME app. 24, from 8 "to 60" with a pressure range that
varies from ASME 150 # to 1500 #, carbon steel and stainless steel. In
recent years DB Progetti has developed a new product called "DB speed
lock" rapid closure able to perform the maneuvers of opening and closing in
a time significantly reduced, because it lacks threaded pins that slow down
operations.
Quick opening closure«DB
speed lock» (design pressure
380 barg, tested at 495 Barg)
Alcune nostre realizzazioni:
Quick opening closure
«DB speed lock»
Quick opening closure
Asme VIII div.1 app.24
Alcune nostre realizzazioni:
PRODUCTION
The DB Projects The production department consists of two separate
units of 1000 m2 and 300 m2, the first is used for the storage,
processing, assembly, and welding of the parts that make up the interior
for the filtration of the gas, and the construction of pressure vessels,
according to the testing department / dispatch offices. The second place
is the head office were we develop pressure vessel engineering. The
welding personnel qualified in accordance with ASME IX and EN / UNI.
PALL
Partnership– DB Progetti:
Since 2009 DB PROGETTI have been co-operating with Pall Italy on joint
projects such as the design and construction of port elements coalescing
plates for skid gas filtration in Nuovo Pignone Bari. During these years, this
collaboration has become more frequent, be coming more involved in
projects and applications which are increasingly complex and demanding.
This collaboration has resulted in the definition of an NDA between the
parties.
.
Partnership– DB Progetti:
Some of the major clients DB Projects are:
PALL Italia
Tecnomec
Nuovo Pignone
Turboden
FAS S.p.a.
Officine Gianesi Edilio S.r.l.
Antico Olindo S.r.l.
Unidro
Ballestra
Metano Impianti
Angioletti Vessel
CMS
Fiorentini
Premabergo
Ammonia Casale
TUV Italia
Olsa
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti:
Partnership– DB Progetti: