MONTEPAONE S.r.l.
STRUMENTAZIONE SCIENTIFICA DA LABORATORIO
___________________________________________________________________________________________________________
Relazione tecnica Cappe Labogene
Le cappe Labogene-ScanLaf, costruite in Danimarca, sono le cappe che più rispettano le richieste
mondiali in fatto di sicurezza e comfort per l’operatore. Cappe approvate dal TUV secondo le
norme di sicurezza EN 12469:2000 (Performance criteria for microbiological safety cabinets),
BS 5726 e DIN 12980.
Marchio CE.
Cappe MARS PRO
E' la cappa Biohazard che assicura la massima sicurezza all'operatore, all'ambiente e al
prodotto. In essa sono posizionati tre diversi filtri HEPA; uno al di sotto del piano di lavoro,
uno principale e l'ultimo in espulsione. Questa innovativa disposizione dei filtri consente
numerosi benefici. Maggior durata del filtro principale che riceve aria già filtrata e ''pulita'';
semplice sostituzione dei filtri che sono posizionati al di sotto del piano di lavoro e quindi di
facile accesso. Questi ultimi si possono sostituire con la cappa in funzione senza dover
utilizzare una sanificazione preventiva mediante formaldeide diminuendo l'interruzione del
lavoro nel laboratorio. Inoltre si riduce l'area contaminata in quanto l'aria ''sporca'' viene subito
filtrata prima di arrivare sul filtro principale. E'
particolarmente consigliata negli ambienti tipo P-3.
Lo schermo frontale inclinato rappresenta il massimo
dell'ergonomicità e del comfort per l'operatore che può
finalmente lavorare nella posizione più comoda possibile.
L'aria viene filtrata per il 70% mentre il rimanente 30%
viene espulso attraverso filtro HEPA: viene perciò
sempre assicurata una barriera di elevata efficacia per la
protezione dell'operatore. Particolarmente innovativa
l’introduzione, al di sotto del filtro HEPA principale, di un
laminatore che rende maggiormente omogenea la
velocità dell’aria all’interno della cappa; ScanLaf in
questo modo è riuscita a ridurre la velocità dell’aria a
0,35 m/sec +/-10% evitando in questo modo zone con
turbolenza. Sono dotate di finestra motorizzata che
consente il posizionamento della finestra frontale
all'altezza desiderata senza sforzo da parte dell'operatore: la finestra può essere inoltre
ribaltata completamente per una semplice pulizia. Grazie ad una moderna tecnologia, è
possibile operare in sicurezza anche con l’apertura frontale posta a 30 cm e facilitare così
alcune operazione (es. pesatura). La finestra e la pareti laterali sono realizzate in cristallo di
sicurezza antisfondamento con spessore 6 mm.
______________________________________________________________________________________________________________________________________
MONTEPAONE S.r.l. - Sede Legale, Amministrativa e Operativa: C.so Lombardia, 75 10099 San Mauro Torinese (Autoporto Pescarito)
+39 011 2734 616 – 257 Fax +39 011 2238161 - [email protected] - www.montepaonesrl.it Cap. Soc. 50.000,00 Codice Fiscale / Partita IVA / Iscrizione C.C.I.A.A. 04980350013 - R.E.A. C.C.I.A.A. TORINO 676249 – Trib. Torino 7266/85
MONTEP AONE S.r.l.
Pagina 2 di 4
___________________________________________________________________________________________________________
Il pannello di controllo, posizionato in modo da facilitare la lettura all’operatore, è dotato di
display a cristalli liquidi retroilluminato per la visualizzazione di tutti i parametri; mediante uscita
USB (opzionale) è possibile verificare i parametri di funzionalità della cappa nel tempo in modo
da poter effettuare facili diagnosi in caso di avaria. Possibilità di regolare la velocità interna
dell’aria attraverso la centralina di controllo (ingresso nel menu di controllo mediante password).
Il piano di lavoro realizzato in acciaio inox, senza alcuna forellinatura, è diviso in parti uguali per
permettere un semplice sterilizzazione in autoclave. E’ costruito con una particolare geometria che
evita la chiusura con le braccia della parte frontale anteriore dedicata alla barriera frontale di
sicurezza per l’operatore.
Luminosità interna regolabile dall’operatore nel campo 0-2000Lux.
Lampada UV con la programmazione del tempo di funzionamento.
Rumorosità estremamente contenuta: 55dbA (modello da 120 cm).
Dimensioni estremamente contenute; tutte le cappe hanno una profondità di soli 80 cm.
______________________________________________________________________________________________________________________________________
MONTEPAONE S.r.l. - Sede Legale, Amministrativa e Operativa: C.so Lombardia, 75 10099 San Mauro Torinese (Autoporto Pescarito)
+39 011 2734 616 – 257 Fax +39 011 2238161 - [email protected] - www.montepaonesrl.it Cap. Soc. 50.000,00 Codice Fiscale / Partita IVA / Iscrizione C.C.I.A.A. 04980350013 - R.E.A. C.C.I.A.A. TORINO 676249 – Trib. Torino 7266/85
MONTEP AONE S.r.l.
Pagina 3 di 4
___________________________________________________________________________________________________________
SCHEDA TECNICA CAPPE MARS PRO
Modelli
Controllo a
microprocessore
Filtri HEPA (tipo H14)
Motoventilatori a controllo
digitale
Efficienza di filtrazione %
Velocita' dell'aria m/sec
Percentuale
espuls/ricircolo
Riduzione velocita' 1/2
Plenum a pressione
negativa
Display parametri
Accensione a password
Contaore di
funzionamento
Programmazione
Allarmi:
Rubinetto gas
Finestra frontale
Finestra
Illuminazione lux
Rumorosita'
Piano di lavoro
Capacità di contenimento
liquidi litri
Apertura dell’area di
lavoro
Apertura frontale massima
Area di lavoro LxP mm
Dimensione est. LxAxP
mm Con supporto da
pavimento
Alimentazione, potenza
V/Kw
Peso Kg
Mars PRO 900
Mars PRO 1200
Mars PRO 1500
Mars PRO
1800
Si
3
3 (due per filtro HEPA principale ed uno per filtro HEPA in
espulsione)
99,999%
99,999%
99,999%
99,999%
0,35 m/sec +/-10%
30/70
Si
Si
digitale LCD retroilluminato (illuminazione regolabile)
Si
Digitale
timer UV timer on/off con partenza della cappa programmata
-velocità aria -pressione -sostituzione filtri -finestra ad altezza
non conforme
A richiesta da montare nelle pareti laterali
a saliscendi motorizzata/a ribalta
in vetro antisfondamento
Regolabile da 0 a 2000 lux mediante due lampade fluorescenti
<55dbA
<56dbA
Acciaio inox
Acciaio inox
Acciaio inox
Acciaio inox
diviso in 3
diviso in 4
diviso in 5
diviso in 6
parti
parti
parti
parti
14
18
22
26
Da 200 a 300 mm
695 mm
900x650
1003x1998x798
1200x650
1303x1998x798
1500x650
1603x1998x798
1800x650
1903x1998x798
220/0,6
220/0,6
220/0,7
220/0,8
25
275
300
32
______________________________________________________________________________________________________________________________________
MONTEPAONE S.r.l. - Sede Legale, Amministrativa e Operativa: C.so Lombardia, 75 10099 San Mauro Torinese (Autoporto Pescarito)
+39 011 2734 616 – 257 Fax +39 011 2238161 - [email protected] - www.montepaonesrl.it Cap. Soc. 50.000,00 Codice Fiscale / Partita IVA / Iscrizione C.C.I.A.A. 04980350013 - R.E.A. C.C.I.A.A. TORINO 676249 – Trib. Torino 7266/85
MONTEP AONE S.r.l.
Pagina 4 di 4
___________________________________________________________________________________________________________
Particolari costruttivi comuni cappe Mars PRO
Lamiere in acciaio con spessore 1,5 mm rivestite in vernice epossidica essicata al forno.
Parti in acciaio inox AISI 316 di spessore 1,5 mm.
Piano di lavoro in acciaio inox diviso in parti uguali per un semplice smontaggio e sterilizzazione Le
dimensioni dei
vari pezzi sono tali da permetterne l'inserimento in autoclave per la migliore sanificazione: grazie alle
modeste dimensioni è inoltre possibile ispezionare semplicemente la parte sottostante il ripiano per
provvedere ad una migliore pulizia. Il vano sottostante il piano di lavoro è anch’esso realizzato in acciaio
inox.
Elevata qualità dei filtri HEPA che presentano un'efficienza di filtrazione pari al 99,999% su particelle
aventi diametro 0,3 um secondo D.O.P. test. Filtri montati su telaio in alluminio con guarnizione
realizzata in un unico pezzo per assicurare la massima tenuta. Le dimensioni del filtro HEPA principale
sono le stesse del piano di lavoro; in questo modo si evitano fenomeni di turbolenza nel flusso. Una
serie di filtri HEPA a sacchetto sono posizionati al di sotto del piano di lavoro.
Bordo del piano di lavoro arrotondato in modo ergonomico che permette un posizione piu' comoda
all'utilizzatore. Inoltre tutto il bordo è realizzato in acciaio Inox in modo da evitare fenomeni di ruggine o
abrasioni della vernice.
Valvole di servizio per D.O.P. test facilmente raggiungibili.
Doppio motoventilatore con controllo digitale della velocità dotato di compensazione automatica della
velocità in base al carico dei filtri HEPA: I motoventilatori sono montati rispettivamente sul filtro HEPA
principale e prima del filtro HEPA in espulsione. Allarme di sicurezza acustico e visivo in caso di non
corretta velocità dell'aria. La velocità del flusso laminare è pari a 0,35 m/sec; la velocità del flusso in
aspirazione è di 0,40 m/sec.
Allarmi acustici e visivi per apertura della finestra frontale scorretta e velocità dell'aria non corretta nei
valori di sicurezza. Lo stesso allarme viene attivato a seguito di cadute di pressione sul filtro HEPA
principale.
Le cappe sono dotate di pulsante di stand by che riduce a metà la velocità dell'aria ma non permette
l'utilizzo della cappa disattivando l'illuminazione interna. Questa funzione e' particolarmente utile in caso
di deposito di materiale da mantenere in condizioni sterili.
Illuminazione interna con lampade fluorescenti che assicurano un'illuminazione superiore a 2000 lux
(con regolazione manuale da parte dell’utente). Grazie alla verniciatura in colore bianco della parete
frontale interna, viene assicurata la migliore illuminazione interna senza zone d’ombra e senza riflessi di
luce.
Rumorosità estremamente contenuta: inferiore a 55dbA (unica nel suo genere) misurata secondo le ISO
6081. Tale basso livello di rumorosità viene raggiunto senza l'ausilio di materiale fono-assorbente che
rappresenta un ricettacolo di sporcizia e di potenziale inquinamento.
Lampada UV dotata di timer.
Pannello di controllo realizzato con tasti a membrana. Visualizza tutti i parametri operativi e consente la
programmazione anche della partenza della cappa. E' dotato di contatore di lavoro digitale.
Rubinetti per gas, vuoto e aria compressa realizzati in ottone verniciato in epossidica. Raccordi in
acciaio inox.
Supporto da pavimento profilati in acciaio, cavi con sezione quadrata. E' dotato di piedini regolabili in
altezza per un livellamento orizzontale. Tre supporti disponibili: uno a bassa altezza 74 cm, uno ad alta
altezza 90 cm ed uno con altezza regolabile elettricamente da 70-110 cm.
______________________________________________________________________________________________________________________________________
MONTEPAONE S.r.l. - Sede Legale, Amministrativa e Operativa: C.so Lombardia, 75 10099 San Mauro Torinese (Autoporto Pescarito)
+39 011 2734 616 – 257 Fax +39 011 2238161 - [email protected] - www.montepaonesrl.it Cap. Soc. 50.000,00 Codice Fiscale / Partita IVA / Iscrizione C.C.I.A.A. 04980350013 - R.E.A. C.C.I.A.A. TORINO 676249 – Trib. Torino 7266/85
Cytosafe 3 filter Class 2 cabinets
Mars Pro
LaboGene SCANdinavian by design.
Mars Pro
Ultrasafe Class 2
An Ultrasafe Triple Filter
- Microbiological Safety Cabinets
For the Ultimate in personal, product, environment protection - Comfort and Safety to ensure your well-being when
working with hazardous materials such as Cytostatic, Virustatic pharmaceutics and category 3 pathogens*.
Low Energy & Low Noise Technology
“ScanLaf...Advanced Designs
for your Safety & Comfort.”
*In category 3 containment
laboratories.
Mars Pro
Biological Safety Cabinets
Quality by Definition
Triple filter protection with “safe change” engineering, from the inventors of the first 3 filter cabinets.
At ScanLaf we know how important it is to select the right cabinet to meet both your technical requirements whilst at the same time providing both ultimate protection and comfort for the operator.
Mars Pro Class 2 cabinets are better by design for you, your work and for your laboratory.
Mars Pro series of Class 2 Safety cabinet with "Safe Change" triple
filter configuration is your guarantee of ultimate safety when working with Cytostatic drugs or materials. Whether in research, production or dispensing, the Mars Pro cabinets keeps you, your laboratory and the environment safe and contamination free at all times.
Triple filter technology ensures elimination of any cross contamination. With the main HEPA filters beneath the work top and
the inflow air having a very short pathway, all possible contaminates are retained. This configuration also safeguards all other
air conducting channels, filters, fans etc. from any contagion.
The cabinet design allows for safe filter change and disposal
from within the chamber whilst the cabinet is operating, thus
protecting the operator during this procedure.
2 Mars Pro cabinets have been tested and certified by TÜV
Nord and conform to EN12469:2000 and DIN12980 and are
so registered and certificated. This certification also confirms
that the Mars Pro cabinets conforms to the requirements of
Equipment & Product Safety Act-GSPG§7(1).
Quality & Quiteness is the ScanLaf trade mark. But with the
Mars Pro cabinets energy saving, contaminate elimination, protection of life and environment can be added!!
Maximum Operator Safety & Comfort Assured with
• Filter Efficiency >99.999999997 % of 3 μm- better than ULPA filters
• Safe change of filters & disposal of filters whilst operational
• Air pathways and channels, filters, fans remain contamination-free
• On shut-down of Mars Pro all contaminates are retained and excluded from escape
• Complete operator comfort without leg restriction when seated
• Quiet operation, less than 56 dB(A)
Tested and certified by TUV Nord
The ergonomically correct sloping front and glare-free lighting gives a
comfortable, stress-free working position when either seated or standing.
Sectional work top for easy removal and cleaning
by one person. Easily autoclaves if so required.
Laminator technology ensures glare-free, diffused lighting
and uniform laminar air flow inside the work area.
Maximum Operator Safety
• Downflow & exhaust fans are constantly monitored
via the downflow sensors to ensure safe operating
conditions are maintained.
• Visual and acoustic alarms for indication of unsafe airflow conditions or interruptions.
• V shaped, angled front air intake grills , allowing a comfortable work position, whilst obviating restriction of
the airflow that maybe caused by incorrect positioning
of equipments in the chamber.
Low energy consumption also results in less heat transmission
to the work chamber thereby lower evaporation rates to any
samples in the clean area and consequently lower air conditioning demands for the whole laboratory. This all adds up to
significant reductions in overall running costs.
EC Fans by EBM-Papst™ are DC output fans with integrated
AC converters and are at the leading edge of energy saving
technology in motor design and offer the following advantages:
• Digital control & operation
• Greater efficiency with less energy consumption than
conventional AC fans
• Lower operating temperatures & inceased operational life
Energy Saving Benefits
The Mars Pro Class 2 cabinets have been engineered to take full advantage of the latest energy saving components available today and
this is exemplified by the utilisation of EC* Fans both for downflow
and extract air, equating to an energy consumption of only 0.9 amps.
The innovation of using 3 or 4 low energy fans in the Mars
Pro cabinets, as compared to 2 AC fans, as in most other safety cabinets, also allows for a less restricted construction whilst
at the same time giving the advantage of incorporating 11 cm
deep HEPA filters, which give a longer working life.
Comfortable working position without restriction of the Angled front air inflow grills.
• Quieter in operation, < 56 dB(A) in the Mars Pro Class 2
• Control & monitoring of operating speeds with Alarm outputs
• Reduced starting current
Precise digital control of the Mars Pro cabinet via regulation of
the EC fans allows for direct setting of the fan speeds required,
giving up to 85 % more power as compared to conventional
analogue regulation with AC fans. This all equates to much lower noise levels and correspondingly reduced energy consumption, resulting in lower operational costs.
Microprocessor Control
Eye Level Microprocessor Control
• Precise, direct fan speed settings, control & measurement
giving low noise levels
• Gives view of all cabinet functions from both standing
or seated position
• Airflow control for down flow & exhaust air measurement
with precise alarm settings
• Functions for full or reduced fan speeds, resetable hour
counter, lighting level
• Pressostat option
• UV light timer, exhaust & downflow alarms,
window position alarm
• Energy saving reduced speed facility for fast, safe start up and for
maintaining cabinet integrity whilst cabinet is unattended
• Service program access via key pad code
• Decontamination program for either Formalin or VHP
• Automatic start up/shut down via time setting
Precise digital control of the cabinet via regulation of the EC fans
allows for direct setting of the fan speeds required with up to 85 %
more power compared to conventional analogue regulation.
This equates to much lower noise levels and correspondingly
much lower energy consumption, therfore lower running costs.
Additionally a Pressostat can be incorporated if required, to
measure the pressure across the main HEPA filter, giving an indication of any restrictions or blockage.
The Microprocessor Control panel with LCD display controls all
functions of the cabinet and is conveniently placed for easy viewing and operation from either a seated or standing position.
Incorporating a “real time” clock for programming auto start
up/auto close down, it also includes functions for reduced
speed, resettable hour counter, lighting with variable adjustment 0-2000 Lux and UV timer. All alarms for exhaust and
downflow air and window position are indicated visually and
audibly. A Decontamination programme for either Formalin or
VHP can also be included. Service access is also provided, protected via a key pad code and all settings and adjustments can
be checked or changed through the controller. The digital fan
system and alarm thresholds are precisely controlled via the microprocessor which guarentees excellent airflow performance.
UV Light
A UV light for decontamination of the work surfaces or for deactivating DNA can be supplied in the interior of the work chamber
and located out of direct view. This can also be purchased and fitted retrospectively and the microprocessor programmed accordingly. The operation of the UV light, via the control panel, can be
adjusted for timed delay start and stop of the exposure time or
can be programmed to be operational whilst the laboratory is unattended, i.e. at lunch break or during the night time. An alarm
indication for UV tube replacement is also included. This offers the
highest safety protection and convenience for the operator.
USB Port
A USB port option is available and facilitates the monitoring and
documenting the full performance of the Mars Pro cabinet via a PC
for GMP work. This allows daily logging of the air flow speeds, alarm
activation and all settings and functions used, when and where. This
is also open communication channel platform for external control
units, i.e BMS systems, Central building alarm systems etc.
Eye level control panel can be viewed and operated from
either a seated or standing postion by the operator.
Compact Design
The Mars Pro series of cabinets are only available as a free
standing unit, complete with a support stand in order to accommodate the under bench filter module.
With the overall height of the Mars Pro being 2 m, recirculating
models can easily be located in laboratories with low ceiling
heights. It is advisable to have a 20 cm clearance above recirculating models to allow for an unrestricted exhaust air flow.
There are 4 sizes of adjustable support stands for the Mars Pro
cabinet, including an Electric Elevation stand which can vary the
working height between 75 cm to 105 cm. Easily adjusted by
push-button operation to the height position convenient for the
operator, whether seated or standing. At the fully adjusted height
of 105 cm the overall height of the cabinet + stand is only 2.353
m, easily accommodated in a laboratory with 2.5 m ceiling height.
AirFlow Pattern
The Mars Pro's unique design incorporating laminator technology
with 2 downflow fans and a single exhaust fan, digitally controlled,
ensures true laminar and turbulent-free air flow distribution throughout the work chamber. This advancement results in lower noise levels, a vibration free work area coupled with a longer filter life-time.
This makes the Mars Pro Class 2 cabinet the lowest freestanding cabinet in the World!
Slim, compact design and dimensions allows for
easy positioning and location in the laboratory.
Mars Pro model
Width (mm)
Mars Pro 900
1003
Mars Pro 1200
1305
Mars Pro 1500
1610
Mars Pro 1800
1915
With Electrical elevation stand
Z Support Stand Height
Height (mm)
725 ± 25
1999 ± 25
825 ± 25
2099 ± 25
925 ± 25
2199 ± 25
Stroke
Z Stand
Height (mm)
Min
717
1993
Max
1017
2293
Connection to External Ducting
The extraction of exhaust air from the Mars Pro Class 2 cabinet is usually achieved by either a dedicated or “shared” extract duct, in either case it is always via an anti-blow back valve
mounted on a plenum which covers the exhaust filter aperture.
These two extract connections are reffered to as a Hard Duct
or a Thimble Duct respectively, the latter is extracting air from
the laboratory also. (See diagrams)
The Mars Pro Class 2 cabinet, ducted either way, can have a working
height of up to 90 cm in a laboratory with a ceiling height of 2.4 m
or 100 cm working height in a laboratory with a 2.5 m ceiling height.
...This makes the Mars Pro Class 2 cabinet the Lowest and
most versatile cabinet in the World!
• Provision of 3rd Pressure sensor in duct for airflow
monitoring
• Provision of potential free contact for connection to
Central Alarm or BMS system
• Connection for ducting Damper valve
Hard duct connection to side
entry Anti blow back valve.
Thimble connection to the
top of Anti blow back valve.
Thimble connection to the
top of Anti blow back valve.
Internal Visual Display Units
Options & Versions
Computer VDU’s for viewing manufacturing protocols that can
be easily installed on the internal rear wall , either permanently
fitted or magnetically mounted for easy removal or positioning
to suit the operators convenience.
The design & construction of the Mars Pro Class 2 cabinet allows
for many options to the standard cabinet or specific versions for
applications were Class 2 protection is required or advisable.
Permanent Mounted Type
The latest technology of 19” built-in LED screen with exterior
controls, fully sealed into the rear wall without any covering
window to minimise glare or reflections and to maximise the
operators viewing and comfort.
Magnetically Mounted Type
The latest technology of 19” LED screen with a completely
sealed construction, fully cleanable and fitted with an integrated magnetic mounting panel. Easily positioned and removed
when not in use. Complete with exterior controls module.
Options
• USB port for PC connection, data logging or air flow
speeds, alarms, settings. Link up to BMS or central alarm
systems 3rd Sensor connection for exhaust air measurement in connected ducting
• High Work opening of 30 cm ( standard 20 cm) to front window
• Electrically operated, elevated support stand
• Eco-Save auto start/auto stop using PIR sensor (Passive Infra Red) see details below
Versions
• Mars Pro-IVF with integration of microscope and heated/
cool platens in work surface
• Mars Pro-Weigh Master with/without marble insert balance platform, computer screen integrated in rear wall
• Mars Pro-Iso with lead protection on under bench
trough, lead glass to all windows, including front screen
• Mars Pro-B2 class 2 with 100% exhaust and safe change
filter system
If you have a specfic requirement for a “specific class 2 cabinet”, let us know the application and our specialist engineers will be able to advise and invariably offer a solution.
Options
The design & construction of the Mars Pro Class 2 cabinet allows
for many options to the standard cabinet or specific versions for
applications were Class 2 protection is required or advisable.
• Support stands of clean room design and high stability allows easy lifting by pallet truck or fork lift. Available with
castors (option) for easy re-location or transportation.
Standard heights available in 75 cm, 80 cm, 90 cm + 5 cm
and also electric elevation with variable height adjustment
• Marble insert to work top section for weighing applications to 5 decimal places
• Valves for Gas; Vacuum; Nitrogen; Compressed Air,
mounted on side window
• Built-In computer screen on rear wall or attached with
magnetic mountings
• Safety operated Bunsen Burner
• Heated work top panel 300x450 cm with thermostatic
circulator control and placement shelf
• Sink fitted into work top 325x325x200 cm, AISi 304
stainless steel with water tap, located on LHS or RHSplease specify
The standard work tops of the Mars Pro Class 2 cabinets are
constructed in 30 cm sections for easy removal and cleaning on all surfaces which can easily be autoclaved if required.
Consequently the Mars Pro 1.2 has 4 sections. Other options
are available to suit customer requirements, either a single
one piece work top or a three part work top consisting of 2
end sections of 30 cm and a central section of 60 cm.
This flexibility of work top choice enables the Mars to be
configured to suit your exact practical requirements.
Mars Pro Cytosafe Class 2.
Service valves for Air, Nitrogen and
Vacuum mounted on side window.
Marble plates for balance/weighing stability and
Sinks with/without faucet can be fitted as options.
Service Access
All Service and adjustment procedures are performed from the
front of the cabinet, including exchange of HEPA filters, changing or adjustments to circuit boards and sensors.
All alarm functions, fan speed and DOP valve changes and are
made via the Microprocessor Control panel, the Service Mode
function of which is password protected.
Consequently, the cabinet can remain in situ without making any positional changes in your laboratory or having to disconnect any ducting.
All service is performed from the front of the cabinet, including:
• Change of HEPA filters
• Adjustment or change of circuit boards and sensors
• All adjustments to alarms, fan speeds, and DOP valves
are made via the microprocessor control panel
- Service code protected
Removal of Filter Guard, prior to sealing
the filters before removal.
Precise integrity testing of the individual
under-bench Main Filter.
Triple Filter Cassette, already sealed, ready
for removal via a Hazardous Waste bag.
Model
Unit
M900 Pro
9.002.023.000
9.002.020.000
9.002.022.000
9.002.021.000
mm
798x1003x1998
798x1303x1998
798x1603x1998
798x1903x1998
650x900x720
650x1200x720
650x1500x720
650x1800x720
Catalogue no.
External dimensions (DxWxH)
M1200 Pro
M1500 Pro
M1800 Pro
Working chamber, dimensions (DxWxH)
mm
Working height
m
Front opening
mm
Air velocity, vertical flow
m/s
Air velocity, deviation
±%
10
10
10
10
Down flow rate
m /h
500
650
810
975
Exhaust flow rate
m /h
260
350
440
520
Noise level, ISO 6081
dB(A)
<56
<56
<57
<57
Light intensity variable
Lux
0-2000
0-2000
0-2000
0-2000
Work height off 0.75-1.10 in 2.50 rooms
3
3
200 optional 300
0,28 (adjustable 0,25-0,55)
Total HEPA filter integrity
Efficiency 99.99999999% against 0.3 µm particle H-14 size 99.99999975% in MPPS
V-shaped table tops
Yes
Yes
Yes
Yes
Clean room box design
Yes
Yes
Yes
Yes
Excellent light distribution
Yes
Yes
Yes
Yes
Electrical sliding windows
Yes
Yes
Yes
Yes
Complete cabinet pressure test
Yes
Yes
Yes
Yes
Window cleanable on both sides
Voltage/frequency
Yes (side windows only if space around allows cleaning)
220-240/50-60 or 110-120/50-60
V/Hz
Power consumption with light on
W
200
225
250
275
Fuses
A
10
10
10
10
Net weight
kg
225
250
275
300
Shipping volume
m3
2.2
2.9
3.2
4.1
Window material
Hardened/laminated safety glass
Cabinet material
Polyester coated steel/AISI 304 Stainless steel
Mars Class 2 – 3 filter cabinet.
Orion Ultrasafe B2 Class 2 cabinet.
Clean Air & Laminar Flow
ScanLaf represents the best in Class II and laminar flow cabinets with the advantage of low energy consumption, digital
control and ergonomic design. The Industrial ScanLaf program
offers a range of Down Flow modules and enclosures for powder and animal handling as well Air showers and Glove boxes,
all of which can be produced to Customers specifications.
A truly unique bespoke portfolio!
Vacuum & Cooling
ScanVac epitomizes the best in Freeze Drying and Vacuum
Concentration equipments and offers a wide range of bench or
floor standing units with temperatures down to -110 ºC.
Together with accessories and components compatible with
previous Danish produced models , ScanVac can offer continuity of supply, service, advice and assistance.
ScanCool the brand that describes a range of Ultra Freezers for
sample storage offering a choice of Chest or Upright models
from 100 to 600 litres capacity. Environmentally friendly and
energy saving design concepts are standard features of all units
in the ScanCool range.
The ChillSafe range of cooling & cryogenic baths and circulators with capacities of 8 to 18 litres and temperatures from
-30 ºC to -90 ºC completes the ScanCool offering.
Centrifugation
ScanSpeed, the name that defines quality centrifuges from LaboGene. Offering bench-top high and low speed models with or
without refrigeration for today’s discerning laboratory technician.
Quality engineering with modern designs and features that exemplifies Danish craftsmanship.
LaboGene ApS
Nøglegårdsvej 20
DK-3540 Lynge
Tel
(+45) 3940 2566
Fax
(+45) 4498 1741
Mail [email protected]
Web www.labogene.com
Cat.no. Mars Pro 6.000.020.001, April 2010
I ScanLaf presents: Mars Pro Class 2 Safety Cabinet
Design and production by: www.idp.dk
LaboGene™ is a Danish Company that specialises in the design, development, manufacture and sales of laboratory and industrial equipments in the fields of Clean Air & Laminar Flow,
Vacuum & Cooling and Centrifugation.