Pio Forzatti - Publications
PAPERS
1973
73.1) P.Forzatti, E.Martinez, G.C.Kuczynski, J.J.Carberry
"Influence of γ-irradiation upon catalytic selectivity. II The role of Ca in the Ag catalyzed oxidation of
ethylene"
J.Catal., 28, 455-458 (1973).
73.2) P.Forzatti, A.Klimasara, G.C.Kuczynski, J.J.Carberry
"γ-irradiation enhanced yield in the Ag catalyzed oxidation of ethylene. The kinetics of the irradiation
process"
J.Catal., 29, 169-172 (1973).
73.3) F.Trifirò, C.Banfi, G.Caputo, P.Forzatti, I.Pasquon
"Oxidation of butenes to maleic anhydride on MnMoO4 based catalyst"
J.Catal., 30, 393-402 (1973).
73.4) F.Cavallo, P.Forzatti
"La produzione industriale dell'ossido di propilene"
I.C.P.-gennaio (1973), 36-41.
1974
74.1) P.Forzatti, F.Trifirò
"Catalytic behaviour of Mo-based catalysts in liquid phase epoxidation of propylene by
hydroperoxides"
Reac.Kinet.Catal.Lett., 1, 367-372 (1974).
74.2) P.Forzatti, F.Trifirò, I.Pasquon
"Catalytic behaviour of molybdates in liquid phase heterogeneous epoxidation of cyclohexene"
Chim.Ind.(Milano), 56, 259-263 (1974).
74.3) F.Trifirò, P.Forzatti, S.Preite, I.Pasquon
"Liquid phase epoxidation of cyclohexene by tert-butyl hydroperoxide on a Mo-based catalyst"
J.Less-Common Metals, 36, 319-328 (1974).
1975
75.1) F.Trifirò, P.Forzatti, I.Pasquon
"Catalytic behaviour of oxo-complexes and molybdenum oxide-based catalysts in epoxidation of
cyclohexene"
in "Catalysis:Heterogeneous and Homogeneous" Elsevier, Amsterdam, 509-518 (1975).
75.2) F.Trifirò, G.Caputo, P.Forzatti
"Catalytic oxidation of 1-butene. Effect of oxygen pressure"
Ind.Eng.Chem.Prod.Res.Develop., 14, 22-26 (1975).
1976
76.1) D.Brkic, P.Forzatti, I.Pasquon, F.Trifirò
"Kinetic aspects of dye-sensitized photo-oxigenation"
J.Photochem., 5, 23-32 (1976).
76.2) F.Trifirò, P.Forzatti, P.L.Villa
"Factors that influence the preparation of pure molybdates and tungstates"
in "Preparation of Catalysts" Elsevier, Amsterdam (1976), p.147-156.
1977
77.1) S.Carrà, P.Forzatti
"Engineering aspects of selective hydrocarbon oxidation"
Catal.Rev.Sci.Eng., 15, 1-52 (1977).
77.2) P.Forzatti, F.Trifirò
"Synthesis and characterization of cadmium tellurium molybdate"
Gazz.Chim.Ital., 107, 35-37 (1977).
77.3) P.Forzatti, F.Trifirò
"Synthesis and characterization of manganese tellurium molybdate, MnTeMoO6"
Gazz.Chim.Ital., 107, 259-261 (1977).
77.4) G.Alessandrini, L.Cairati, P.Forzatti, P.L.Villa, F.Trifirò
"Chemical, structural and catalytic modifications of pure and doped iron(III) molybdate"
J.Less-Common Metals, 54, 373-386 (1977).
77.5) P.Forzatti, P.L.Villa, D.Ercoli, G.Ercoli, F.Gasparini, F.Trifirò
"Molybdates doped with tellurium as oxidation catalysts"
Ind.Eng.Chem.Prod.Res.Develop., 16, 26-35 (1977).
1978
78.1) P.Forzatti, F.Trifirò, P.L.Villa
"The role of surface acidic centers in the extensive oxidation of 1-butene over molybdenum oxidebased catalysts"
J.Catal., 52, 389-396 (1978).
78.2) D.Brkic, P.Forzatti, I.Pasquon, F.Trifirò
"Homogeneous and heterogeneous photo-oxygenation of 2,3-dimethyl-2-butene"
J.Mol. Catal., 3, 173-184 (1977/78).
78.3) D.Brkic, P.Forzatti, I.Pasquon, F.Trifirò
"Fotossidazione omogenea ed eterogenea di olefine"
Chim.Ind.(Milano), 60, 820-827 (1978).
78.4) P.Forzatti, S.Moravek, I.Pasquon, F.Trifirò
"Role of tellurium in the oxidation of 1-butene on Te-doped CdMoO4"
React.Kinet.Catal.Lett., 8, 401-406 (1978).
78.5) P.Forzatti, I.Pasquon, F.Trifirò, P.L.Villa
"Nuovi catalizzatori ternari per l'ossidazione allilica di olefine"
Chim.Ind.(Milano), 60, 297-302 (1978).
78.6) D.Brkic, P.Forzatti, F.Trifirò
"The photosensitized oxygenation of olefins with reactors of different types"
Chem.Eng.Sci., 33, 853-861 (1978).
78.7) P.Forzatti
"ZnTeMoO6: a new metal tellurium molybdate"
Gazz.Chim.Ital., 108, 73-75 (1978).
78.8) P.Forzatti, G.Tieghi
"Solid state reactions to CdTeMoO6 and its structural characterization"
J.Solid State Chem., 25, 387-390 (1978).
78.9) G.Tieghi, P.Forzatti
"Crystal data for MnTeMoO6, CoTeMoO6 and ZnTeMoO6"
J.Appl.Cryst., 11, 291-292 (1978).
78.10) P.Forzatti, F.Trifirò, P.L.Villa
"CdTeMoO6, CoTeMoO6, MnTeMoO6, and ZnTeMoO6: a new class of selective catalysts for allylic
oxidation of butene and propylene"
J.Catal., 55, 52-57 (1978).
1979
79.1) P.Forzatti, S.Moravek, I.Pasquon, F.Trifirò, P.L.Villa
"Factors influencing the selectivity of Cd-molbdate catalyst in the oxidation of 1-butene"
in "Proc. Vth Iberoamerican Symposium on Catalysis", 2, 55-60 (1979).
79.2) P.Forzatti, F.Trifirò
"Oxidation of propylene over tellurium oxides and Cd-Te-Mo-O and Mn-Te-Mo-O systems"
React.Kinet.Catal.Lett., 10, 275-280 (1979).
79.3) P.Forzatti, I.Pasquon, F.Trifirò
"Tellurium as a specific component in new molybdenum-based catalysts for the selective oxidation and
ammoxidation of olefins"
in "The Chemistry and Uses of Mo", (1979) p.128-131.
79.4) P.Forzatti, C.Attardo, F.Trifirò
"Photoreduction of silica supported MoO3"
J.C.S.Chem.Comm., 747-748 (1979).
1980
80.1) L.Cairati, L.Di Fiore, P.Forzatti, I.Pasquon, F.Trifirò
"Oxidation of methanol in a fluidized bed. 1. Catalyst attrition resistance and process variable study"
Ind.Eng.Chem.Proc.Des.Develop., 19, 561-565 (1980).
80.2) P.Forzatti, P.Tittarelli
"Metal telluromolybdates of the type MTeMoO6"
J.Solid State Chem., 33, 421-427 (1980).
80.3) M.El-Sawi, P.Forzatti, I.Pasquon, P.L.Villa
"On the deactivation of Ru/Al2O3 methanation catalyst"
Chim.Ind.(Milano), 62, 833-836 (1980).
80.4) P.Forzatti, N.Kotzev, L.Gencheva, I.Pasquon, D.Shopov, P.L.Villa
"On the nature of acidic centers in the deep oxidation of olefins over CdMoO4: temperatureprogrammed desorption/ mass spectrometer investigation"
J.Catal., 65, 369-373 (1980).
80.5) M.Carbucicchio, P.Forzatti, F.Trifirò, E.Tronconi, P.L.Villa
"Deactivation of silica supported Fe2O3-MoO3 catalyst for the oxidation of methanol"
in "Catalyst Deactivation", Elsevier, Amsterdam (1980), p.103-113.
80.6) M.El-Sawi, P.Forzatti, I.Pasquon, P.L.Villa
"Effect of hydrogen sulphide on the deactivation of alumina-supported ruthenium methanation
catalyst"
J.Chem.Tech.Biotechnol., 30, 530-534 (1980).
1981
81.1) M.Cannizzaro, P.Forzatti, I.Pasquon, P.L.Villa
"Oxidation of propylene to acrylic acid on a Fe-Mo-Bi oxide system"
React.Kinet.Catal.Lett., 17, 57-62 (1981).
81.2) P.Forzatti, G.Buzzi-Ferraris, M.Morbidelli, S.Carrà
"Disattivazione dei catalizzatori. 1.Aspetti chimici e cinetici"
Chim.Ind.(Milano), 63, 575-586 (1981); Int. Chem. Eng., 24, 60-73 (1984).
81.3) M.Morbidelli, P.Forzatti, G.Buzzi-Ferraris, S.Carrà
"Disattivazione dei catalizzatori. 2.Influenza dei fenomeni di trasporto sul comportamento delle singole
particelle"
Chim.Ind.(Milano), 63, 663-677 (1981); Int. Chem. Eng., 24, 232-248 (1984).
81.4) G.Buzzi-Ferraris, M.Morbidelli, P.Forzatti, S.Carrà
"Disattivazione dei catalizzatori. 3.Modelli matematici di gestione ed ottimizzazione di reattori con
disattivazione"
Chim.Ind.(Milano), 63, 810-819 (1981); Int. Chem. Eng., 24, 441-451 (1984).
81.5) M.Cannizzaro, P.Forzatti, P.Tittarelli
"Synthesis of CdTeWO6 and its catalytic behaviour in the allylic oxidation of propylene"
Gazz.Chim.Ital., 111, 469-472 (1981).
1982
82.1) P.Forzatti, G.Buzzi-Ferraris
"Reaction-deactivation kinetics of methanol oxidation over a silica supported Fe2O3-MoO3 catalyst"
Ind.Eng.Chem.Proc.Des.Develop., 21, 67-73 (1982).
82.2) P.Forzatti, P.L.Villa, N.Ferlazzo, D.Jones
"Multicomponent catalysts for the oxidation of propylene to acrolein: Fe2(MoO4)3 doped with Bi or
Te”
J. Catal., 76, 188-207 (1982).
82.3) P. Forzatti
”On the deactivation of Fe2O3-MoO2/SiO2 catalysts for the oxidation of methanol to formaldehyde”
React. Kin. Catal. Letters, 20, 213-218 (1982).
1983
83.1) G.Buzzi-Ferraris, P.Forzatti
"A new sequential experimental design procedure for discriminating among rival models"
Chem.Eng.Sci., 38, 225-232 (1983).
83.2) L.Cairati, P.Forzatti, F.Trifirò, P.L.Villa
"Oxidation of methanol in a fluidized bed. Fe2O3-MoO3 and MoO3 supported on silica"
in "The Chemistry and Uses of Mo", (1982), 402-405.
83.3) G.Buzzi-Ferraris, P.Forzatti, G.Garone, I.Pasquon, P.L.Villa
"Estimation of parameters in kinetic models when dependent and independent variables are subject to
error"
E.F.C.E. Publication Series n.27, 3e Congrès International "Informatique et Génie Chimique", 2, C44
1-5 (1983).
1984
84.1) G.Buzzi-Ferraris, E.Facchi, P.Forzatti, E.Tronconi
"Control optimization of tubular reactors with catalyst decay"
Ind.Eng.Chem.Proc.Des.Develop., 23, 126-131 (1984).
84.2) G.Buzzi-Ferraris, P.Forzatti, G.Emig, H.Hofmann
"Sequential experimental design for model discrimination in the case of multiple responses"
Chem.Eng.Sci., 39, 81-85 (1984).
84.3) P.Forzatti, M.Borghesi, I.Pasquon, E.Tronconi
"Thermal desorption from heterogeneous surfaces: normalized curve treatment"
Surface Sci., 137, 595-606 (1984).
84.4) P.Forzatti, I.Pasquon, P.L.Villa, G.Vita
"Synthesis of alcohols from carbon oxides and hydrogen: analysis of alcohol mixtures"
Riv.Combust., 38, 207-210 (1984).
84.5) P.Forzatti, P.L.Villa, C.M.Mari
"Electrical coductivity of polycrystalline Fe2(MoO4)3"
Mater.Phys.Chem., 10, 385-391 (1984).
84.6) P.Forzatti, M.Borghesi, I.Pasquon, E.Tronconi
"A novel analysis of TPD from heterogeneous surfaces: a normalized single curve approach to the case
of free readsorption"
in "Proc. IX Iberoamerican Symposium on Catalysis", (1984), p.281-289.
1985
85.1) P.L.Villa, P.Forzatti, G.Buzzi-Ferraris, G.Garone, I.Pasquon
"Synthesis of alcohols from carbon oxides and hydrogen. 1.Kinetics of the low pressure methanol
synthesis"
Ind.Eng.Chem.Proc.Des.Develop., 24, 12-19 (1985).
85.2) G.Busca, P.Forzatti, J.C.Lavallay, E.Tronconi
"A TPD, FT-IR and catalytic study of the interaction of methanol with pure and KOH doped TiO2
anatase"
in "Catalysis by acids and bases", Elsevier, Amsterdam, (1985), p.15-24.
85.3) C.M.Mari, P.Forzatti, P.L.Villa
"Electrical properties of a Fe2(MoO4)3 catalyst"
in "Transport in nonstoichiometric compounds", Plenum, New York, (1985), p.43-50.
85.4) P.Forzatti, P.L.Villa, C.M.Mari
"Defect structure and transport properties of Fe2(MoO4)3 doped with Bi"
J.Chem.Soc.Faraday Trans. 2, 81, 245-253 (1985).
85.5) E.Tronconi, P.Forzatti
"Experimental criteria for diffusional limitations during temperature-programmed desorption from
porous catalysts"
J.Catal., 93, 197-200 (1985).
85.6) J.C.J.Bart, N.Giordano, P.Forzatti
"Phase relationships in the Cerium-Molybdenum-Tellurium oxide system"
in"Solid state chemistry and catalysis", A.C.S. Symposium Series 279, p.89-101 (1985).
1986
86.1) P.Forzatti, M.Borghesi, I.Pasquon, E.Tronconi
"Experimental study on the separability of reaction-deactivation kinetics: thermal desorption of
alcohols from fresh and Na-poisoned -Al2O3"
A.I.Ch.E. Journal, 32, 87-95 (1986).
86.2) E.Tronconi, P.Forzatti
"Modelling and experimental verification of TPD from porous catalysts"
Chem.Eng.Sci., 61, 2541-2545 (1986).
86.3) P.Forzatti, G.Buzzi-Ferraris, E.Tronconi
"Sequential design of experiments. 1.A review of the procedures for discriminating between rival
models"
Ing. Chim. Ital., 22, 8-11 (1986).
1987
87.1) P.Forzatti, E.Tronconi, G.Busca, P.Tittarelli
"Oxidation of methanol to methyl formate over V-Ti oxide catalysts"
Catalysis Today, 1, 209-218 (1987).
87.2) G.Busca, P.Tittarelli, E.Tronconi, P.Forzatti
"Evidences for the formation of an anatase-type V-Ti oxide solid solution"
J.Solid State Chem., 67, 91-97 (1987).
87.3) P.Forzatti, G.Buzzi-Ferraris, P.Canu, E.Tronconi
"Sequential design of experiments. 2.A review of the procedures for increasing the precision of the
parameter estimates"
Ing.Chim.Ital., 23 (N.3-4), 10-15 (1987).
87.4) P.L.Villa, P. Forzatti, G. Buzzi-Ferraris
"Response to comments on"Synthesis of alcohols from carbon oxides and hydrogen. Kinetics of the
low pressure methanol synthesis." "
Ind.Eng.Chem.Res., 26, 401-402 (1987).
87.5) J.C.J.Bart, P.Forzatti, F.Garbassi, F.Cariati
"Cerium-Molybdenum-Tellurium oxides"
Z. anorg. allg. Chemie, 546, 206-216 (1987).
87.6) E.Tronconi, N.Ferlazzo, P.Forzatti, I.Pasquon
"Synthesis of alcohols from carbon oxides and hydrogen. 4.Lumped kinetics for the higher alcohols
synthesis over a Zn-Cr-K oxide catalyst"
Ind.Eng.Chem.Res., 26, 2122-2129 (1987).
87.7) M.Carbucicchio, G.Centi, P.Forzatti, F.Trifirò, P.L.Villa
"Propylene oxidation to acrolein on Fe-Sb-Ti-O catalysts"
J.Catal., 107, 307-316 (1987).
87.8) E.Tronconi, A.S.Elmi, N.Ferlazzo, P.Forzatti, G.Busca, P.Tittarelli
"Methyl formate from methanol oxidation over coprecipitated V-Ti-O catalysts"
Ind.Eng.Chem.Res., 26, 1269-1275 (1987).
87.9) E.Tronconi, C.Cristiani, N.Ferlazzo, P.Forzatti, I.Pasquon, P.L.Villa
"Synthesis of alcohols from carbon oxides and hydrogen. V Catalytic behavior of pure Cr, Zn, Mn
oxides towadrs CO/H2"
Appl.Catal., 32, 285-292 (1987).
87.10) G.Busca, A.S.Elmi, P.Forzatti
"Mechanism of selective methanol oxidation over vanadium-titanium oxide catalysts: a FT-IR and
flow- reactor study"
J.Phys.Chem., 91, 5263-5269 (1987).
87.11) E.Tronconi, P.Forzatti
"Diffusison limited TPD from heterogeneous catalytic surfaces"
Chem. Eng. Sci., 62, 2779-2781 (1987).
87.12) P.Forzatti, P.L.Villa, C.M. Mari
"Defect structure and transport properties of Cr2(MoO4)3 and Al2(MoO4)3"
Mat. Res. Bull., 22 (12), 1593-1602 (1987).
1988
88.1) P.Forzatti, C.Cristiani, N.Ferlazzo, L.Lietti, E.Tronconi, P.L.Villa, P.Pasquon
"Synthesis of alcohols from carbon oxides and hydrogen. VII: Study on the preparation, activation and
catalytic behavior of a ZnMnCrK-oxide catalyst"
J. Catal., 111, 120-135 (1988).
88.2) L.Lietti, D.Botta, P.Forzatti, E.Mantica, I.Pasquon, and E.Tronconi
"Synthesis of alcohols from carbon oxides and hydrogen. VIII. A temperature programmed surface
reaction study of n-butanal on a Zn-Cr-O catalyst"
J. Catal., 111, 360-373 (1988).
88.3) P.Forzatti, E.Tronconi, and L.Lietti
"Temperature programmed desorption from real catalysts"
Handbook of heat and mass transfer - Volume 3, Chapter 8, p. 299-331, Gulf Publishing Co., 1988.
88.4) L.Lietti, E.Tronconi, and P.Forzatti
"A TPSR study of 1-butanol over a Zn-Cr-O catalyst"
J. Mol. Catal., 44 (2), 201-206 (1988).
88.5) E.Tronconi and P.Forzatti
"Thermodynamic constraints in the higher alcohols synthesis"
La Chimica e l'Industria, 70, 66-70 (1988).
88.6) E.Tronconi, P.Forzatti and G.Buzzi-Ferraris
"Integrated process optimization for the higher alcohol synthesis."
Process System Engineering 1988, Sidney Australia. The Institution of Chemical Engineers, Australia.
Preprints of papers, pp. 237-242 National Conference Publications No. 88/17.
88.7) P.Forzatti, C.Cristiani, N.Ferlazzo, L.Lietti, I.Pasquon, E.Tronconi, P.L.Villa, G.B.Antonelli,
D.Sanfilippo and S.Contarini
"Synthesis of alcohols from carbon oxides and hydrogen. X. Characterization and catalytic behavior of
pure and alkali promoted Mn-Cr-O catalysts"
Actas 11th Iberoam. Symp. Catal., Vol. 2, 671-678 (1988).
88.8) E.Tronconi, L.Lietti and P.Forzatti
"Diffusion and readsorption during TPD from porous materials"
Thermochimica Acta, 135, 147-155 (1988).
88.9) P.Forzatti, and J.P.Gomez Martin
"Selective catalytic reduction of NOx"
Proc. 2nd Int. Conf. on Enviromental Protection, Vol. 1, p.51-58 (1988).
88.10) P.Forzatti, C.Cristiani, L.Chesi, J.P.Gomez Martin and G.Busca
"Coprecipitated V-Ti oxides for SCR of NOx by NH3"
Proc. 2nd Int. Conf. on Enviromental Protection, Vol. 2, p.75-82 (1988).
1989
89.1) E.Tronconi, L.Lietti, P.Forzatti and I.Pasquon
"Higher alcohol synthesis over alkali-promoted high-temperature methanol catalysts"
Appl. Catal., 47, 317-333 (1989).
89.2) C.Cristiani, M.Bellotto, P.Forzatti, L.Lietti, I.Pasquon and P.L.Villa
"Preparation chemistry and phase transitions in the Zn-Mn-Cr system"
Solid State Ionics, 32/33, 112-122 (1989).
89.3) L.Lietti, E.Tronconi, P.Forzatti and I.Pasquon
"Reactivity of mixed Zn-Cr oxide surface towards linear oxygenated molecules by TPSR method"
in "Structure and Reactivity of Surfaces", A.Zecchina, G.Costa and C.Morterra (Ed.s), Elsevier
(Amsterdam), 581-589 (1989).
89.4) P.Forzatti, E.Tronconi and P.L.Villa
"Direct synthesis of mixtures of methanol and higher alcohols from syngas"
Handbook of heat and mass transfer - Volume 4, Gulf Publishing Co., Vol. 4, 1989, 289-311.
89.5) G.Buzzi-Ferraris, P.Forzatti and P.Canu
"An implemented sequential design procedure for discriminating among rival monoresponse models"
in "Recent Advances in Chemical Engineering" (D.N. Saraf and D. Kunzru Eds) 1989, p. 618-624.
89.6) E.Tronconi, P.Forzatti, G.Groppi, L.Lietti and D.Sanfilippo
"Kinetics of the alcohol chain growth in the higher alcohol synthesis over an alkali promoted Zn-Cr-O
catalyst"
in "Recent Advances in Chemical Engineering" (D.N. Saraf and D. Kunzru Eds) 1989, p. 217-223.
89.7) C.Cristiani, M.Bellotto and P.Forzatti
"Structural investigation on a spinel-related system: a shell and core model for Zn/Cr=1 mixed oxide"
J. Chem. Soc. Faraday I, 85, 895-906 (1989).
89.8) C.Cristiani, P.Forzatti, and G.Busca
"On the surface structure of vanadia-titania catalysts: combined Laser-Raman and Fourier Transforminfrared investigation"
J. Catal., 116, 586-589 (1989).
89.9) A.S.Elmi, E.Tronconi, C.Cristiani,J.P.Gomez Martin, P.Forzatti and G.Busca
"Mechanism and active sites for methanol oxidation to methylformate over coprecipitated V-Ti-O
catalysts"
Ind. Eng. Chem. Res., 28, 387-393 (1989).
89.10) L.Lietti, E.Tronconi, P.Forzatti and I.Pasquon
"Surface properties of ZnCrO-based catalysts and related mechanistic features of the higher alcohol
synthesis by TPSR and FT-IR"
J. Mol. Catal., 55, 43-54 (1989).
89.11) C.Cristiani, P.Forzatti, J.P.Gomez Martin, G.Ramis e G.Busca
"Sistemi a base di V2O5-TiO2 per la riduzione catalitica selettiva degli NOx con NH3:
caratterizzazione chimico-fisica e studio FT-IR dell'interazione con NH3"
in "Nuove Frontiere per le tecnologie chimiche e la tutela dell'ambiente", p. 193-200 (1989).
89.12) C.Cristiani, M.Bellotto, P.Forzatti and E.Tronconi
"Preparation chemistry, phase transformation and catalytic behavior of unpromoted MnCrO systems in
the synthesis of alcohols from CO and H2"
Appl. Catal., 56, 253-269 (1989).
1990
90.1) G.Buzzi-Ferraris, P.Forzatti, P.Canu
"An improved version of a sequential design criterion for discriminating among rival multiresponse
models"
Chem. Eng. Sci., 45, 477-481 (1990).
90.2) A.S.Elmi, G.Busca, C.Cristiani, P.Forzatti and E.Tronconi
"Oxyesterification of methanol to methylformate over V-Ti oxide catalysts"
in "New Developments in Selective Oxidation" (C. Centi and F. Trifirò Eds), Elsevier, Amsterdam,
305-315 (1990)
90.3) E.Tronconi, P.Forzatti and I.Pasquon
"An investigation on the thermodynamic constraints in the higher alcohol synthesis over a Cs-promoted
Zn-Cr-O catalyst"
J. Catal., 124, 376-390 (1990).
90.4) L.Lietti, P.Forzatti, E.Tronconi and I.Pasquon
"Temperature-programmed reaction of C4 oxygenates on unpromoted and K-promoted ZnCr oxide in
relation to the mechanism of the higher alcohol synthesis"
J.Catal, 126, 401-420 (1990).
90.5) G. Ramis, G. Busca, V. Lorenzelli and P. Forzatti
"FT-IR study of the adsorption and coadsorption of NO, NO2 and NH3 on TiO2 anatase"
Appl. Catal., 64, 243-257 (1990).
90.6) G. Ramis, G. Busca, F. Bregani and P. Forzatti
"FT-IR study of the adsorption and coadsorption of NO, NO2 and NH3 on vanadia-titania and
mechanism of the SCR reaction."
Appl. Catal., 64, 259-278 (1990).
90.7) C. Cristiani, P. Forzatti, G. Busca and G. Ramis
"On the consistency of data obtained from different techniques concerning the surface structure of
vanadia - titania catalysts: reply to the comment of Israel E. Wachs"
J. Catal., 124, 574-576 (1990).
1991
91.1) G.Ramis, G.Busca, F.Bregani, and P.Forzatti
"An FT-IR study of the reaction of NO with adsorbed ammonia on the surface of vanadia-titania
DeNoxing catalysts"
in "Catalytic Science and Technology" (Kodansha Ltd), Vol. 1, p. 189-194 (1991).
91.2) E.Tronconi, L.Lietti, P.Forzatti, G.Groppi, and I. Pasquon
"A mechanistic kinetic model for the distribution of C2+ Oxygenate Products in the Higher Alcohol
Synthesis."
in "Catalytic Science and Technology" (Kodansha Ltd), Vol. 1, p. 255-260 (1991).
91.3) L. Lietti, E. Tronconi, and P. Forzatti
"Synthesis of C2+ oxygenates from methanol at atmospheric pressure over alkali-promoted ZnCr oxide
catalysts"
Appl. Catal., 70, 73-86 (1991).
91.4) P. Forzatti, E. Tronconi, and I. Pasquon
"Higher alcohol synthesis"
Catal. Rev. Sci. Eng., 33 (1-2), 109-168 (1991).
91.5) L. Lietti, B. Nassur Espinosa, E. Tronconi, and P. Forzatti
"Formation of C2+ oxygenates from C1 oxygenates at atmospheric pressure"
Proc. IX International Symposium on Alcohol Fuels, Vol. 1, p. 67-72 (1991).
91.6) E. Tronconi, L. Lietti, and P. Forzatti
"An integrated approach to the study of the higher alcohol synthesis over alkali-promoted high
temperature methanol catalysts"
Proc. 7th International Symposium on Heterogeneous Catalysis, Bourgas, p. 643-648 (1991).
91.7) P. Forzatti e F. Bregani
"Riduzione Catalitica Selettiva degli NOx con NH3 nei fumi emessi dalle centrali termoelettriche"
La Termotecnica, Novembre 1991, p. 57-68.
91.8) P. Forzatti
"Selective catalytic reduction of NOx by NH3: technical and fundamental aspects"
Anales del Grupo Especializado de Catalysis, IV, 58-71 (1991).
91.9) G. Groppi, P. Forzatti
"Combustione catalitica"
Atti Convegno Nazionale "Tecnologie Chimiche nella Produzione di Energia Elettrica" Pisa 29-31
Ottobre 1991, p. 231-243.
91.10) E. Tronconi, A. Beretta, P. Forzatti, S. Malloggi, G. De Michele
"A mathematical model of the monolith reactor for selective catalytic removal of NOx"
Atti Convegno Nazionale "Tecnologie Chimiche nella Produzione di Energia Elettrica" Pisa 29-31
Ottobre 1991, p. 417-427
91.11) F. Bregani, G. Busca, C. Cristiani, N. Ferlazzo, P. Forzatti, S. Svachula, G. Ramis
"Studio di materiali per la riduzione catalitica selettiva degli NOx con NH3"
Atti Convegno Nazionale "Tecnologie Chimiche nella Produzione di Energia Elettrica" Pisa 29-31
Ottobre 1991, p. 429-439.
91.12) L. Lietti, E. Tronconi, P. Forzatti
"Mechanistic Aspects of the C1--> C2 Step in the Higher Alcohol Synthesis"
JECAT 91 – Tokio, p. 112-115 (1991).
91.13) E. Tronconi, A. Beretta, P. Forzatti, S. Malloggi and G. De Michele
"A Mathematical Model of the Monolith Reactor for Selective Catalytic Removal of NOx"
JECAT 91 - Tokio, p. 290-293 (1991).
1992
92.1) E. Tronconi, and P. Forzatti
"On the adequacy of lumped parameter models for SCR reactors with monolith structure"
A. I. Ch. E. Journal, 38, 201-2210 (1992).
92.2) E. Tronconi, L. Lietti, G. Groppi, P. Forzatti, and I. Pasquon
"Mechanistic kinetic treatment of the chain growth process in the higher alcohol synthesis over a Cspromoted Zn-Cr-O catalyst"
J. Catal, 135, 99-114 (1992).
92.3) G. Ramis, G. Busca, P. Forzatti
"Spectroscopic Analysis of Titania-Tungsta-Vanadia DeNOxing Catalysts"
Appl. Catal. B: Environmental, 1, L9-L13 (1992).
92.4) L. Lietti, E. Tronconi, P. Forzatti
" Mechanistic Aspects of the Higher Alcohol Synthesis over K2O-Promoted ZnCr Oxide: Temperature
Programmed Reaction and Flow Experiments of C3, C4 and C5 Oxygenates"
J. Catal., 135, 400-409 (1992).
92.5) E. Tronconi, N. Ferlazzo, P. Forzatti, I. Pasquon, B. Casale, L. Marini
"A Mathematical Model for the Catalytic Hydregenolysis of Carbohydrates"
Chem. Eng. Sci., 47, 2451-2456 (1992).
92.6) E. Tronconi, P. Forzatti, J.P. Gomez Martin, S. Malloggi
" Selective Catalytic Removal of NOx: A Mathematical Model for Design of Catalyst and Reactor"
Chem. Eng. Sci., 47, 2401-2406 (1992).
92.7) G. Ramis, G. Busca, C. Cristiani, L. Lietti, P. Forzatti, F. Bregani
"Characterization of Tunsta-Titania De-NOxing Catalysts"
Langmuir, 8, 1744-1749 (1992).
92.8) G. Groppi, P. Forzatti
"Combustione Catalitica per Applicazioni di Potenza"
La Rivista dei Combustibili, 46, 158-170 (1992).
92.9) P. Forzatti, E. Tronconi, L. Lietti, G. Groppi
"Mechanistic. Thermodynamic and Kinetic Aspects of the Higher Alcohols Synthesis"
Proc. 25th ISATA Int. Symp., Zero Emission Vehicles - The Electric/Hybrid and Alternative Fuel
Challenge, 315-322 (1992).
92.10) P. Forzatti
"Materiali Ceramici per il Trattamento Fumi", 19° Corso "Materiali Ceramici innovativi per l'
Energia", Lecce, 14-19 Settembre 1992.
1993
93.1) L. Lietti, E. Tronconi, and P. Forzatti
"Identifying the reaction network of the higher alcohol synthesis over alkali-promoted ZnCrO
catalysts"
in "New Frontiers in Catalysis" Guczi L. et al. (Editors), Elsevier Science Publishers B.V. 1993, p.
2765-2768.
93.2) C. Cristiani, M. Bellotto, P. Forzatti and F. Bregani
"On the Morphological Properties od Tungsta-Titania De-NOxing Catalysts"
J. Materials Research, 8 (8), 2019-2025 (1993).
93.3) G. Groppi, M. Bellotto, C. Cristiani, P.L. Villa, P. Forzatti
"Preparation of Hexaluminate Based Materials for Catalytic Combustion"
Appl. Catal. A: General, 104, 101-108 (1993).
93.4) J. Svachula, N. Ferlazzo, P. Forzatti, E. Tronconi, F. Bregani
"Selective Reduction of NOx by NH3 over Honeycomb DeNOxing Catalysts"
Ind. Eng. Chem. Res., 32, 1053-1060 (1993).
93.5) J. Svachula, L.J. Alemani, N. Ferlazzo, P. Forzatti, E. Tronconi, F. Bregani
"Oxidation of SO2 to SO3 over Honeycomb DeNOxing catalysts"
Ind. Eng. Chem. Res., 32, 826-834 (1993).
93.6) G. Groppi, E. Tronconi, P. Forzatti
" Modelling of Catalytic Combustors for Gas Turbines Applications"
Catal. Today, 17, 237-250 (1993).
93.7) L. Lietti, J. Svachula, P. Forzatti, G. Busca, G. Ramis, F. Bregani
"Surface and Catalytic Properties of Vanadia-Titania and Tungsta-Titania Systems in the Selective
Catalytic Reduction of Nitrogen Oxides"
Catal. Today, 17, 237-249 (1993).
93.8) J. Svachula, L.J. Alemany, N. Ferlazzo, P. Forzatti, E. Tronconi, F. Bregani,
"The Influence of Operating and Design Variables on the oxidation of SO2 over Commercial Monolith
SCR catalysts"
Preceedings 1st Conference on Chemical and Process Engineering, 343-347 (1993).
93.9) G. Groppi, E. Tronconi, C. Cristiani, P. Forzatti
"Design of Catalytic Materials for Gas Turbine Catalytic Combustor through Experimental and
Modelling Approach"
Preceedings 1st Conference on Chemical and Process Engineering, 841-845 (1993).
93.10) E. Tronconi, M. Bassini, and P. Forzatti
"Heat Exchange Properties of Monolithic Catalysts"
Preceedings 1st Conference on Chemical and Process Engineering, 743-747 (1993).
93.11) A. Beretta, E. Tronconi, P. Forzatti, I. Pasquon
"A Kinetic Analysis for the Optimization of Isobutanol Production from Synthesis Gas"
Preceedings 1st Conference on Chemical and Process Engineering, 229-233 (1993).
93.12) L. Lietti, P. Forzatti, G. Ramis, G. Busca, F. Bregani
"Potassium Doping of Vanadia -Titania De-NOxing Catalysts: Surface Characterization and Reactivity
Study."
Appl. Catal. B: Environmental, 3, 13-35 (1993).
1994
94.1) G. Groppi, M. Bellotto, C. Cristiani, P. Forzatti
"Phase Composition and Mechanism of Formation of Ba-ß-Alumina-Type Systems for Catalytic
Combustion Prepared by Coprecipitation"
Journal of Materials Science, 29, 3441-3450 (1994).
94.2) G. Busca, V. Sanchez Escribano, P. Forzatti, L. Lietti, and G. Ramis
"Effect of K Doping on Isopropanol Adsorption, Desorption and Catalytic Oxidation over VanadiaTitania"
in V. Cortés Corberan and S. Vic Bellon (Eds), "New Developments in Selective Oxidation II",
Elsevier Science B.V., p. 869-876 (1994).
94.3) L. Lietti and P. Forzatti
"Temperature Programmed Desorption/Reaction of Ammonia over V2O5/TiO2 DeNOxing Catalysts"
J. Catal., 147, 241-249 (1994).
94.4) G. Groppi, F. Assandri, M. Bellotto, C. Cristiani and P. Forzatti
"The Crystal Structure of Ba-ß-Alumina Materials for High temperature Catalytic Combustion"
J. Solid State Chem., 114, 326-336 (1994).
94.5) A. Beretta, E. Tronconi, L.J. Alemany, J. Svachula, and P. Forzatti
"Effect of Morphology on the Reduction of NOx and Oxidation of SO2 over Honeycomb SCR
Catalysts" in V. Cortés Corberan and S. Vic Bellon (Eds), "New Developments in Selective Oxidation
II", Elsevier Science B.V., p. 869-876 (1994).
94.6) A. Beretta, E. Tronconi, L.J. Alemany, J. Svachula, P. Forzatti, and S. Malloggi
"Optimal Pore Architecture for Ceramic Honeycomb Catalysts Used in the Reduction of NOx with
NH3."
Int. Ceramic Journal, 45-51 (August 1994).
94.7) G. Groppi, M. Bellotto, C. Cristiani, and P. Forzatti
"Ba-ß-Alumina Ceramic Materials for Catalytic Combustion in Gas Turbine Applications"
Int. Ceramic Journal, 20-24 (February 1994).
94.8) G. Groppi, C. Cristiani, P. Forzatti, and A. Ricci
"Preparation, Characterization and Catalytic Activity of Layered Ba-Fe-Al-O Systems for HighTemperature Catalytic Combustion"
XIV Simposio IberoAmericano de Catalisis, Conception, Chile 1994, Vol II, p. 733-738.
94.9) L. Alemany, A. Bahamonde, F. Bregani, C. Cristiani, L. Lietti, P. Forzatti, G. Ramis
"Caracterizacion Estructural, Morfologica, Quimico-Fisica y Actiovidad Catalitica de Sistemas de
V2O5-WO3/TiO2 para la RCS de NOx"
XIV Simposio IberoAmericano de Catalisis, Conception, Chile 1994, Vol .
94.10) A. Beretta, E. Tronconi, L. Lietti, P. Forzatti, I. Pasquon
"Synthesis of Oxygenates from CO/H2 for Reformulated Gasoline"
Proc. 27th ISATA Conference, Aachen, Germany, October 31-November 4, 1994. Dedicated
conference on the Electric, Hybrid and Alternative Fuel Vehicle, pp. 299-307.
94.11) G. Groppi, M. Bellotto, G. Busca, C. Cristiani, P. Forzatti
"Materiali con Struttura di Ba-ß-Al2O3 per Combustione Catalitica ad Alta Temperatura"
Atti 2° Convegno Nazionale sui Materiali per Ingegneria, Vol 1., p. 23-30, 19-21 Sett. 1994, Trento.
1995
95.1) L.J. Alemany, L. Lietti, N. Ferlazzo, P. Forzatti,G. Busca, E. Giamello, and F. Bregani
"Reactivity and Characteristics of V2O5-WO3/TiO2 Catalysts Systems in the Selective Catalytic
Reduction of NOx."
J. Catal., 154, 117-130 (1995).
95.2) E. Tronconi, M. Bassini, P. Forzatti and D. Carmello
"Design of Monolithic Catalysts for Strongly Exothermic Reactions under Non-Adiabatic Conditions"
in "Preparation of Catalyst VI", G. Poncelet et al Eds, Elsevier Science B.V., 765-774 (1995).
95.3) E. Tronconi, A. Beretta, A.S. Elmi, P. Forzatti, S. Malloggi and A. Baldacci
"A Complete Model of SCR Monolith Reactors for the Analysis of Interacting NOx Reduction and
SO2 Oxidation Reactions"
Chem. Eng. Sci., 49, 4277-4287 (1995).
95.4) G. Groppi. A. Belloli, E. Tronconi, P. Forzatti
"Analysis of Multidimentional Models of Monolith Catalysts in Hybrid Combustors for Gas Turbines"
A. I. Ch. E. Journal, 41, 2250-2260 (1995).
95.5) G. Groppi, A. Belloli, E. Tronconi, P. Forzatti
"Comparison of Lumped and Distributed Models of Monolith Catalysts in Hybrid Combustors for Gas
Turbines"
Chem. Eng. Sci., 50, 2705-2715 (1995).
95.6) G. Busca, C. Cristiani, P. Forzatti, G. Groppi
"Surface Characterization of Ba-ß-Alumina"
Catal. Letters, 31, 65-74 (1995)
95.7) P. Forzatti and L. Lietti
"State of the Art and Tendencies in the heterogeneous Catalysic for the Reduction of NOx Emission
from Stationary Sources"
Odors & VOC's Journal, December 1995, p. 57-65.
1996
96.1) P. Forzatti
"Kinetic Study of a Simple Chemical Reaction"
Catal. Today, 401-409 (1996).
96.2) L. Lietti, P. Forzatti, L.J. Alemany, G. Busca, E. Giamello, and F. Bregani
"Reactivity of V2O5-WO3/TiO2 Catalysts in the Selective Catalytic Reduction of NO by NH3"
Catal. Today, 29, 143-148 (1996).
96.3) G. Groppi, A. Belloli, E. Tronconi, P. Forzatti
"Catalytic Combustion of CO-H2 on Mn-Substituted Hexaaluminates"
Catal. Today, 29, 403-407 (1996).
96.4) P. Forzatti and L. Lietti
"Recent Advances in DeNOxing Catalysis for Stationary Applications"
Heterogeneous Chemistry Review, 3, 33-51 (1996).
96.5) C. Orsenigo, A. Beretta, J. Svachula, P. Forzatti, E. Tronconi, F. Bregani, A. Baldacci
"Theoretical and Experimental Study of the Interaction between NOx Reduction and SO2 Oxidation
over DeNOx SCR Catalysts"
Catal. Today, 27, 15-21 (1996).
96.6) E. Tronconi, L. Lietti, P. Forzatti, S. Malloggi
"Experimental and Theoretical Investigation on the Dynamics of the SCR-DeNOx Reaction"
Chem. Eng. Sci., 51, 2965-2970 (1996).
96.7) C. Cristiani, G. Groppi, P. Forzatti, G. Busca, M. Daturi
"Comparison of Perovskite and Hexaaluminate-Type Catalysts for CO/H2-Fuelled Gas Turbine
Combustors"
11 Int. Congr. on Catalysis - 40th Anniversary (J.W. Hightower et al. Eds), Studies in Surface Science
and Catalysis, Vol. 101, 473-482 (1996).
96.8) D. Ballardini, L. Sighincelli, L. Visconti, E. Tronconi, P. Forzatti, A. Bahamonde, E. Atanes, J.P.
Gomez Martin, F. Bregani
"Influence of the Process Parameters on the Extrusion of Ceramic Pastes"
11 Int. Congr. on Catalysis - 40th Anniversary (J.W. Hightower et al. Eds), Studies in Surface Science
and Catalysis, Vol. 101, 1359-1368 (1996).
96.9) A. Beretta, E. Tronconi, P. Forzatti, I. Pasquon, L. Tagliabue, E. Micheli, and G.B. Antonelli
"Developmnet of a Mechanistic Kinetic Model of the Higher Alcohol Synthesis over a Cs-Doped
Zn/Cr/O Catalyst: Part I. Model Derivation and Data Fitting"
Ind. Eng. Chem. Res., 35, 2144-2153 (1996).
96.10) A. Beretta, E. Tronconi, P. Forzatti, I. Pasquon
"Developmenet of a Mechanistic Kinetic Model of the Higher Alcohol Synthesis over a Cs-Doped
Zn/Cr/O Catalyst: Part II. Analysis of Chemical Enrichment Experiment"
Ind. Eng. Chem. Res., 35, 2154-2160 (1996).
96.11) G. Groppi, E. Tronconi, P. Forzatti
"Investigation on Catalytic Combustors for Gas Turbine Applications through Mathematical Model
Analysis"
Appl. Catal. A: General, 138, 177-197 (1996).
96.12) L. Lietti, P. Forzatti and F. Berti
"Role of the Redox and Acid Properties in the SCR of NO by NH3 over V2O5-WO3/TiO2 Catalysts"
Catal. Letters, 41, 35-39 (1996).
96.13) P. Forzatti and L. Lietti
"Selective Catalytic Reduction of NOx by NH3 from Stationary Sources"
La Chimica e l' Industria, 78, 685-691 (1996).
96.14) L. Lietti, P. Forzatti and F. Bregani
"Steady-State and Transient Reactivity Study of TiO2-Supported V2O5-WO3 De-NOx Catalysts:
Relevance of the V-W Interaction on the Catalytic Activity"
Ind. Eng. Chem. Res., 35, 3884-3892 (1996).
1997
97.1) M.C. Paganini, L. dell' Acqua, E. Giamello, L. Lietti, P. Forzatti, and G. Busca
"An EPR Study of the Surface Chemistry of the Vanadia-Tungsta-Titania Catalyst: State of V(IV) and
Redox Behaviour"
J. Catal., 166, 195-205 (1997).
97.2) M. Daturi, G. Busca, G. Groppi and P. Forzatti
"Preparation and Characterization of SrTi1-x-yZrxMnyO3 Solid Solution Powders in Ralation to Their
Use in Combustion Catalysis"
Appl. Catal. B: Enviromental, 12, 325-337 (1997).
97.3) P. Forzatti, E. Tronconi, A.E. Elmi and G. Busca
"Methanol Oxidation over Vanadia-Based Catalysts"
Appl. Catal. A: General, 157, 387-408 (1997).
97.4) G. Groppi, C. Cristiani and P. Forzatti
"BaFexAl(12-x)O19 for High Temperature Catalytic Combustion: Physico-chemical Characterization
and Catalytic Activity"
J. Catal. 168, 95-103 (1997).
97.5) L.. Lietti, I. Nova, S. Camurri, E. Tronconi, and P. Forzatti
"Dynamics of the SCR-DeNOx Reaction by the Transient Response Method"
A.I.Ch.E. Journal, 43, 2559-2570 (1997).
97.6) G. Groppi, E. Tronconi, and P. Forzatti
"Application of Mathematical Modelling to the Development of Catalysts for Gas Turbine
Combustors"
"AIDIC Conference Series", 2, 103-110 (1997).
97.7) G. Groppi, C. Cristiani and P. Forzatti
"Preparation and Characterization of Hexaaluminate Materials for High-temperature Catalytic
Combustion".
Catalysis, Vol. 13, Chapter 4, 85-113 (1997).
97.8) G. Groppi, P. Forzatti, F. Berti, and S. Malloggi
"Combustione Catalitica per Turbine a Gas: recenti sviluppi nella sperimentazione su prototipi e nella
ricerca sui catalizzatori"
La Rivista dei Combustibili, 51, 175-184 (1997).
97.9)G. Groppi, C. Cristiani, P. Forzatti
"Materiali per la Combustione Catalitica di Metano per Applicazioni di Potenza"
Materiali : Ricerca e prospettive tecnologiche alle soglie del 2000, Vol. 2, 1449-1456 (1997).
1998
98.1) A. Beretta, E. Tronconi, G. Groppi, P. Forzatti
"Selective Catalytic Reduction of NOxwith NH3 from Stationary Sources"
in "Structured Catalysts and Reactors" (J. Mouljin and A. Cybulski. Eds.) Ch. 5, p. 121-148 (1998)
98.2)L. Majocchi, L. Lietti, A. Beretta, P. Forzatti, E. Micheli, L. Tagliabue
"Synthesis of Short Chain Alcohols over a Cs-promoted Cu/ZnO/Cr2O3 Catalyst"
Applied Catalysis A: General, 166, 393-405(1998).
98.3) M. Bellotto, G. Artioli, C. Cristiani, G. Groppi, P. Forzatti
"On the Crystal Structure and cation valence of Mn in Substituted Ba-β-Al2O3"
J. Catal., 179, 597-605 (1998).
98.4) P. Forzatti,D. Ballardini and L. Sighicelli
"Preparationa and Characterization of Extruded Monolithic Ceramic Catalysts"
in Materials Design for Catalytic Application" (G. Bellussi Ed.); Catal. Today, 41, 87-94 (1998).
98.5) G. Groppi, L. Lietti, E. Tronconi, P. Forzatti
"Catalytic Combustion of Gasified Biomasses over Mn-substituted Haxaaluminates for Gas Turbine
Applications"
Catal. Today, 45, 159-165 (1998).
98.6) L. Lietti, I. Nova, E. Tronconi, P. Forzatti
"Transient Kinetic Study of the SCR-DeNOx Reaction"
Catal. Today, 45, 85-92 (1998)
98.7) E. Tronconi, A. Cavanna and P. Forzatti
"Unsteady Analysis of NO Reduction over SCR-DeNOx Monolith Catalysts"
Ind. Eng. Chem. Research, 37, 2341-1349 (1998).
98.8) I. Nova, L. Lietti, L. Casagrande, L. Dell’Acqua, E. Giamello, and P. Forzatti
"Characterization and reactivity of TiO2-supported MoO3 De-NOx
SCR catalysts"
Appl. Catal. B: Environmental, 17, 245-258 (1998).
98.9) C. Orsenigo, L. Lietti, E. Tronconi, P. Forzatti, and F. Bregani
"Dynamic Investigation of the Role of the Surface Sulphates in NOx Reduction and SO2 Oxidation
over V2O5-WO3/TiO2 Catalysts"
Ind. Eng. Chem. Research, 37, 2350-2359 (1998).
98.10) A. Beretta, P. Forzatti, and L. Piovesan
"Oxidative Dehydroigenation of Propane in Annular Reactor over Pt/Al2O3 Catalysts"
Natural Gas Conversion V.; Studies in Surf. Sci. and Catalysis (A. Parmaliana et al. Eds), Vol. 119,
659-664 (1998).
98.11) G. Groppi, C. Cristiani, P. Forzatti, F. Berti, and M. Malloggi
"High Temperature Combustion of Methane over Hexaaluminate-Supported Pd Catalysts"
Natural Gas Conversion V.; Studies in Surf. Sci. and Catalysis (A. Parmaliana et al. Eds), Vol. 119, 7176 (1998).
98.12) L. Majocchi, A. Beretta, L. Lietti, E. Tronconi, P. Forzatti, E. Micheli, and L. Tagliabue
"Kinetics of Higher Alcohol Synthesis over Low and High temperature Catalysts and Simulation of a
Double-Bed Reactyor"
Natural Gas Conversion V.; Studies in Surf. Sci. and Catalysis (A. Parmaliana et al. Eds), Vol. 119,
497-502 (1998).
98.13) P. Forzatti, C. Orsenigo, D. Ballardini, and F. Berti
"On the Relation between the Rheology of TiO2-Based Ceramic Pastes and the Morphological and
Mechanical properties of the Extruded Catalysts"
Preparation of Catalysts VII; Stud. Surf. Sci. and Catal. Vol 118 (B. Delmon et al. Eds), 787-796
(1998).
98.14) A. Beretta, P. Baiardi, D. Prina, and P. Forzatti
"Development of a catalytic Reactor with Annular Configuration"
Preparation of Catalysts VII; Stud. Surf. Sci. and Catal. Vol 118 (B. Delmon et al. Eds), 541-548
(1998).
98.15) C. Cristiani, G. Groppi, G. Airoldi and P. Forzatti
"Preparation of BaAl12O19- Supported Pd Catalysts for High-T Combustion by Wet Impregantion"
Preparation of Catalysts VII; Stud. Surf. Sci. and Catal. Vol 118 (B. Delmon et al. Eds), 119-126
(1998).
98.16) A. Beretta, C. Orsenigo, N. Ferlazzo, E. Tronconi, P. Forzatti
"An Analysis of the Performances of Plate-type Monolithic Catalysts for SCR-DeNOx Applications"
Ind. Eng. Chem. Res., 37, 2623-2633 (1998).
98.17) G. Groppi, P. Forzatti
"Combustione catalitica per turbine a gas : una nuova tecnologia per la produzione di energia pulita."
Chim. Ind. (Milano), 80 (8), 1017-1019 (1998).
98.18) L.Lietti, G.Ramis, F.Berti, G.Toledo, D.Robba, G.Busca, and P.Forzatti
"Chemical, Structural and Mechanistic Aspects on NOx SCR over Commercial and Model Oxide
Catalysts"
Catal. Today, 42, 101-116 (1998).
1999
99.1) G. Groppi, E. Tronconi, and P. Forzatti
"Mathematical Models of Catalytic Combustors"
Catalysis Reviews -Science and Engineering, 41(2), 227-254 (1999).
99.2) A. Beretta, P. Baiardi, D. Prina, and P. Forzatti
"Analysis of a Catalytic Annular Reactor for Very Short Contact Times"
Chem. Eng. Sci., 54, 765-773 (1999).
99.3) G. Groppi, M. Bellotto, C. Cristiani, P. Forzatti, and P.L. Villa
"Thermal Evolution, Crystal Structure and Cation Valence of Mn in Substituted Ba-B-Al2O3 Prepared
via Coprecipitation in Aqueous Medium"
J. Material Sci., 34, 2609-2620 (1999).
99.4) G. Groppi, C. Cristiani, L. Lietti, C. Ramella, M. Valentini, and P. Forzatti
"Effect of Ceria on Palladium Supported Catalysts for High Temperature Combustion of CH4 under
Lean Conditions"
Catal. Today, 50, 399-412 (1999).
99.5) C.Orsenigo, A.Cavanna, E.Tronconi, and P.Forzatti
"Transient Kinetics of SO2 Oxidation over SCR-DeNOx Monolith Catalysts"
Ind. Eng. Chem., 38, 2593-2598 (1999).
99.6) A. Beretta, L. Piovesan, and P. Forzatti
"An Investigation on the Role of Pt/Al2O3 Catalyst in the Oxidative Dehydrogenation of Propane at
very Short Contact Times"
J. Catal., 184, 455-468 (1999).
99.7) A. Beretta, P. Forzatti, and E. Ranzi
"Production of Olefins via Oxidative Dehydrogenation of propane in Autothermal Conditions"
J. Catal., 184, 469-478 (1999).
99.8) A. Beretta, G. Groppi, L. Majocchi, and P. Forzatti
"Potentialities and Draw-backs of the Experimental Approach to the Study of high-T and high GHSV
Kinetics"
Appl. Catal. A: General, 187, 49-60 (1999)
99.9) P. Forzatti, and G.P. Groppi
"Catalytic Combustion for the Production of Energy"
Catal. Today, 54, 165-180 (1999)
99.10) L. Lietti, C. Cristiani, G.P. Groppi, and P. Forzatti
"Preparation, Characterization and Reactovity of Me-Hexaaluminate (Me= Mn, Co, Fe, Ni, Cr)
catalysts in the Catalytic Combustion of NH3-Containing Gasified Biomasses"
Catal. Today, 59, 191-204 (1999)
99.11) L. Lietti, I. Nova, G. Ramis, L. dell’Acqua, G. Busca, E. Giamello, and P. Forzatti
"Characterisation and Reactivity of V2O5-MoO3/TiO2 deNOx-SCR Catalysts"
J. Catal., 187, 419-435 (1999)
99.12) L. Casagrande, L. Lietti, I. Nova, P. Forzatti, and A. Baiker
"SCR of NOx by NH3 over TiO2-supported V2O5-MoO3 Catalysts : Reactivity and redox Behavior"
Appl. Catal. B: Environmental, 22, 63-77 (1999)
99.13) P. Forzatti
"Ingegneria delle Reazioni Chimiche"
La Chimica e l’Industria, 81, 807 (1999).
99.14) P. Forzatti, and L. Lietti
"Catalyst Deactivation"
Catal. Today, 52, 165-181 (1999).
99.15) P. Forzatti, L. Lietti, I. Nova, E. Tronconi
"Transient Kinetics in Heterogeneous Catalysis: application of the Transient Response Method to the
Study of the Dynamics of the DeNOx-SCR Reaction"
in "Chemical Engineering Greetings to Prof. Mario Dente" (ERIS C.T.), 151-170 (1999).
99.16) E. Ranzi, A. Beretta, P. Forzatti, L.D. Schmith
"Catalyst-Assisted Oxidative Pyrolysis of Hydrocarbons at High Temperature and Short Residence
Time"
in "Chemical Engineering Greetings to Prof. Mario Dente" (ERIS C.T.), 319-330 (1999).
2000
00.01) L. Lietti, I. Nova, E. Tronconi, and P. Forzatti
"Unsteady-state Kinetics of DeNOx-SCR Catalysis"
in "Reaction Engineering for Pollution Prevention", M.A. Abraham and R.P. Hesketh Eds, Elsevier,
85-112 (2000)
00.02) P.Forzatti,I. Nova, and A. Beretta
"DeNOx ans SO2-SO3 Reactivity Study over Eurocat Oxide Catalyst"
Catal. Today, 56, 431-441 (2000).
00.03) P. Forzatti
"Enviromental Catalysis for Stationary Applications"
Catal. Today, 62, 51-65 (2000)
00.04) L. Majocchi, G. Groppi, C. Cristiani, P. Forzatti, L. Basini and A. Guarinoni
"Partial Oxidation of Methane to Synthesis Gas over Rh-Hexaaluminate-Based Catalysts"
Catal. Letters, 65, 49-56 (2000).
00.05) G. Groppi, C. Cristiani, L. Lietti, P. Forzatti
"Study of PdO/Pd Transformation over Alumina Supported Catalysts for Natural Gas Combustion"
Studies in Surf. Sci. and Catal., 130, 3801-3806 (2000).
00.06) A. Beretta, E. Ranzi, P. Forzatti
"Experimental and Theoretical Investigation on the Roles of Heterogemeous and Homogeneous Phases
in the Oxidative Dehydrogenation of Light Paraffins in Novel Short Contact Time Reactors"
Studies in Surf. Sci. and Catal., 130, 1913-1918 (2000).
00.07) I. Nova, L. Lietti, E. Tronconi, P. Forzatti
"Concentration programmed Adsorption-desorption/Surface Reaction Study of the SCR-DeNOx
Reaction"
Studies in Surf. Sci. and Catal., 130, 623-628 (2000).
00.08) G. Groppi, E. Tronconi, P. Forzatti, and M. Berg
"Mathematical Modelling of Catalytic Combustors Fuelled by Gasified Biomasses"
Catal. Today, 59, 151-162 (2000).
00.09) A. Beretta, E. Ranzi, and P. Forzatti
"Production of Olefins via Oxidative Dehydrogenation of Light Paraffins at Short Contact Times"
Catal. Today., 59, 151-162 (2000).
00.10) G. Groppi, E. Tronconi, M. Berg, P. Forzatti
"Development and application of mathematical models of pilot scale Catalytic Combustor Fuelled by
Gasified Biomasses"
Ind. Eng. Chem. Res., 39, 4106-4113 (2000)
00.11) G.C. Bond, P. Forzatti, J. Vedrine
"General introduction: origin and objective of the study "
Catal. Today, 56, 329-332 (2000).
00.12) I. Nova, L. Lietti, E. Tronconi, and P. Forzatti
"Dynamics of SCR Reaction over a TiO2-supported Vanadia-Tungsta Commercial Catalyst "
Catal. Today, 60, 73-82 (2000).
00.13) L. Lietti, I. Nova, P. Forzatti
"Selective Catalytic Reduction (SCR) of NO by NH3 over TiO2-supported V2O5-WO3 and V2O5MoO3 Catalysts "
Topics in Catalysis, 11/12, 111-122 (2000).
00.14) P. Forzatti, A. Beretta, I.A. Vasalos
"Preface "
Catalysis Today, 60, 1 (2000).
00.15) L. Lietti, G. Ramis, G. Busca, F. Bregani, P. Forzatti
"Characterization and Reactivity of MoO3/SiO2 Catalysts in the Selective Catalytic Oxidation of
Ammonia to N2”
Catalysis Today, 61, 187-195 (2000).
2001
01.01) G. Groppi, W. Ibashi, M. Valentini, P. Forzatti
"High Temperature Combustion of CH4 over PdO/Al2O3: Kinetic Measurements in a Structured
Annular Reactor "
Chem. Eng. Sci., 56, 831-839 (2001).
01.02) A. Beretta, E. Ranzi, P. Forzatti
"Oxidative Dehydrogenation of Light Paraffins in Novel Short Contact Time Reactors. Experimental
and Theoretical Investigation"
Chem. Eng. Sci., 56, 779-787 (2001).
01.03) I. Nova, L. Lietti, E. Tronconi, P. Forzatti
"Transient Response Method Applied to the Kinetic Analysis of the DeNOx-SCR Reaction "
Chem. Eng. Sci., 56, 1229-1237 (2001).
01.04) G. Groppi, W. Ibashi, E. Tronconi, P. Forzatti
"Structured Reactors for Kinetic Measurements in Catalytic Combustion "
Chem. Eng. Journal., 82, 57-71 (2001).
01.05) G. Groppi, C. Cristiani, P. Forzatti
"Preparation, Characterisation and Catalytic Activity of Pure and Substituted La-Hexaaluminate
Systems for High Temperature Catalytic Combustion "
Applied Catalysis B: Environmental, 35, 137-148 (2001).
01.06) A. Beretta, P. Forzatti
"High Temperature and Short Contact Time Oxidative Dehydrogenation of Ethane in the Presence of
Pt/Al2O3 and BaMnAl11O19 "
J. Catal., 200, 45-58 (2001).
01.07) G. Groppi, W. Ibashi, E. Tronconi, P. Forzatti
"Structured reactors for kinetic measurements under severe conditions in catalytic combustion over
palladium supported systems”
Catal. Today, 69, 399-408 (2001).
01.08) A.Beretta, P.L. Villa, C. Orsenigo, and P. Forzatti
"Extrusion of TiO2 Honeycomb Monoliths for applications in Enviromental Catalysis”
Material Engineering, 12 (2), 217-245 (2001).
01.09) I. Nova, L. dell’Acqua, L. Lietti, E. Giamello, and P. Forzatti
"Study of the thermal deactivation over a de-NOx catalyst”
Appl. Catal. B: Environmental, 35, 31-42 (2001).
01.10) L. Lietti, P. Forzatti, I. Nova, and E. Tronconi
"NOx storage-reduction over Pt-Ba/γ-Al2O3 catalyst”
J. Catal., 204, 175-191 (2001).
01.11) I. Nova, L. Lietti, A. Beretta, and P. Forzatti
"Study of the sintering of a de-NOx commercial catalyst”
Studies in Surf. Sci. Catal., 139, 149-156 (2001).
01.12) M. Valentini, G. Groppi, C. Cristiani, M. Levi, E. Tronconi, P. Forzatti
”The deposition of γ-Al2O3 layers on ceramic and metallic supports for the preparation of structured
catalysts”
Catal. Today, 69, 307-314 (2001).
01.13) A. Beretta, P. Forzatti
“Catalyst assisted oxidative dehydrogenation of light paraffins in short contact time reactors”
Studies in Surf. Sci. Catal., 136, 191-196 (2001).
01.14) G. Groppi, G. Artioli, C. Cristiani, L. Lietti, P. Forzatti
”Decomposition/reformation process in CH4 combustion activity of PdO over alumina supported
catalysts for gas turbine applications”
Studies in Surf. Sci. Catal., 136, 345-350 (2001).
01.15) A. Beretta, E. Ranzi, P. Forzatti
“Production of Olefins via Oxydative Dehydrogenation of Light Paraffins at Short Contact Times”
Catal. Todat, 64, 103-11 (2001).
01.16) P. Forzatti
”Present Status and Perspectives in de-NOx SCR Catalysis”
Appl. Catalysis, 222, 221-236 (2001)
01.17) G. Groppi, L. Lietti, P. Forzatti
”Processi Catalitici di Riduzione di NOx da Turbine a Gas”
Energia, XXII (3), 68-79 (2001).
01.18) F. Prinetto, G. Ghiotti, I. Nova, L. Lietti, E. Tronconi, and P. Forzatti
”FT-IR and TPD Investigation of the NOx Storage Properties of BaO/Al2O3 and Pt-BaO/Al2O3
Catalysts”
J. Phys. Chem., B 105, 12732-12745 (2001).
2002
02.01) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti
”On the dynamic behavior of NOx-storage/reduction Pt-Ba/Al2O3 catalysts”
Catal. Today, 75, 431-437 (2002).
02.02) G. Groppi, P. Forzatti, G. Rocchini, F. Bregani
”Combustione Catalitica del Metano in Turbine a Gas”
La Termotecnica, 56, 77-88 (2002).
02.03) L. Castoldi, M. Galbiati, P. Forzatti
”Processi Catalitici di Riduzione di NOx da Turbine a Gas”
La Chimica e l’Industria, 84, 57-60, 2002.
02.04) D. Pinna, E. Tronconi, L. Lietti, R. Zennaro, P. Forzatti
“Rassegna di Modelli Cinetici per la Sintesi di Fischer-Tropsch”
La Rivista dei Combustibili, 56 (2), 69-85 (2002).
2003
03.01) P. Forzatti, L. Lietti, E. Tronconi
"Nitrogen Oxides Removal - E (Industrial Processes and Relevant Engineering Issues"
Encyclopedia of Catalysis, Wiley (New York), Vol. 5, 298-343 (2003).
03.02) M. Valentini, G. Groppi, C. Cristiani, M.Levi, N. Nicchio, E. Tronconi, P. Forzatti
”Fluid Dynamic Effect in the Deposition of γ-Al2O3 Layers onto Metallic Supports for Structured
Catalysts”
AIDIC Conference Series, ISBN 0390-2358, Vol 6, 2003, p. 281-290.
03.03) P. Forzatti
”Status and Perspectives of Catalytic Combustion for Gas Turbines”
Catal. Today, 83, 3-18 (2003).
03.04) D. Pinna, E. Tronconi, L. Lietti, R. Zennaro, P. Forzatti
”Wax Composition Transients during Fisher Tropsch synthesis”
J. Catal., 214, 251-260 (2003).
03.05) W. Ibashi, G. Groppi, P.Forzatti
“Kinetic Measurements of HC4 combustion over a 10% PdO/ZrO2 catalyst using a anular flow
Microreactor”
Catal. Today 83 (1-4( 115.129 (2003).
03.06) L. Castoldi, I. Nova, L. Lieti, E. Tronconi, P. Forzatti
”Study of the effect of Ba loading on the performances of a Pt-Ba/Al2O3 catalyst for lean burn
applications”
Chemical Engineering Transactions, 3, 117-122 (2003).
03.07) F. Prinetto, G. Ghiotti, I. Nova, L. Castaldi, L. Lieti, E. Tronconi, P. Forzatti
”In situ FT-IR and reactivity study of NOx storage over Pt-BA- AL2O3 catalysts”
Phys. Chem. Chem. Phys., 5, 4428-4434 (2003).
2004
04.01) A. Beretta, P. Forzatti,
”Partial Oxidation of Light Paraffins to Synthesis Gas in Short Contact Time Reactors”
Chem. Engineering J., 99, 219-226 (2004).
04.02) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti, F. Prinetto, G, Ghiotti
”NOx Adsorption Study over Pt-Ba/Alumina Catalysts: FTIR and Pulse Experiments”
J. Catal., 222, 377-388 (2004)
04.03) I. Nova, L. Castoldi, F. Prinetto, V. Dal Santo, L. Lietti, E. Tronconi, P. Forzatti, G. Ghiotti, R.
Psaro, S. Recchia
”NOx Adsorption Study over Pt-Ba/Alumina Catalysts: FT-IR and Reactivity Study”
Topics in Catalysis, 30/31, 181-186 (2004).
04.04) A. Scotti, I. Nova, E. Tronconi, L. Castoldi, L. Lietti, P. Forzatti
”Kinetic Study of Lean NOx Storage over Pt-Ba/Al2O3 System”
Ind. Eng. Chem. Res., 43, 4522-4534 (2004).
04.05) L. Castoldi, I. Nova, L. Lietti, P. Forzatti
”Study of the Effect of Ba Loading for Catalytic Activity of Pt-Ba/Al2O3 Model Catalysts”
Catal. Today, 96, 43-52 (2004).
04.06) I. Tavazzi, A. Beretta, G. Groppi, P. Forzatti
”An investigation of methane partial oxidation kinetics over Rh-supported catalysts”
Studies in Surface Sci. Catal., 147, 163-168 (2004).
04.07) F. Fiore, L. Lietti, G. Pederzani, E. Tronconi, R. Zennaro, P. Forzatti
”Reactivity of paraffins, olefins and alcohols during Fischer-Tropsch synthesis on a Co/Al2O3 catalyst”
Studies in Surface Sci. Catal., 147, 289-294 (2004).
2005
05.01) T. Bruno, A. Beretta, G. Groppi, M. Roderi, P. Forzatti
”A study of methane partial oxidation in annular reactor: activity of Rh/α-Al2O3 and Rh/ZrO2
catalysts” Catalysis Today, 99, 89-98 (2005).
05.02) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti
“NOx Storage mechanism over Pt-Ba/Al2O3 lean NOx trap catalysts”
Prep. Pap. – Am. Chem. Soc., Div. Fuel. Chem. 50 (1), 388-391 (2005).
Abstract of papers of the American Chemical Society 229 ; MAR 13 2005.
05.03) C. Cristiani, M. Valentini, M. Merazzi, S. Neglia, P. Forzatti
”Effect of ageing time on chemical and rheological evolution in γ-alumina slurries for dip-coating”
Catal Today, 105, 492-198 (2005).
05.04) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti, F. Prinetto, G. Ghiotti,
”The Pt-Ba interaction in lean NOx trap system”
SAE paper, 2005-01-1085.
05.05) M. Maestri, A. Beretta, G. Groppi, E. Tronconi, P. Forzatti
”Comparison among structured and packed-bed reactors for the catalytic partial oxidation of CH4 at
short contact times”
Catal. Today, 105, 709-717 (2005).
05.06) P.Forzatti, L.Castoldi, I. Nova
“Rimozione di ossidi di azoto nei gas di scarico di autoveicoli Diesel”
Rendiconti, Istituto Lombardo Accademia di Scienze e Lettere, 139, 141-174 (2005).
05.07) P. Forzatti, I. Nova, L. Castoldi
”NOx removal catalysis”
Chem. Biochem. Eng. Q., 19 (4), 309-323 (2005).
05.07) L. Castoldi, I. Nova, L. Lietti, P. Forzatti
“NOx Storage Chemistry of Pt-Ba/Al2O3 Lean NOx Trap Catalysts”
Progress in Catalysis Research ( Ed. Lawrence P. Bevy), Nova Science Publishers Inc, 199-221
(2005).
05.08) E. Macchi, G. Lozza, P. Chiesa, P. Forzatti and G. Groppi
in “Cicli combinati a gas naturale: polveri sottili ed emissioni gassose.” Ed. E. Macchi, Polipress, 2005,
p. 75-140.
05.09) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti
”NOx storage mechanism over Pt-Ba/Al2O3 lean NOx trap catalysts”
Abstract of papers of the American Chemical Society 229 ; MAR 13 2005.
2006
06.01) I.Tavazzi, M. Maestri, A. Beretta, G. Groppi, E. Tronconi, P. Forzatti
“Steady-state and transient analysis of a CH4-catalytic partial oxidation reformer”
A.I.Ch.E. Journal, 52 (9), 3234-3245 (2006).
06.02) L. Castoldi, R. Matarrese, L. Lietti, P. Forzatti
“Simultaneous removal of NOx and soot on on Pt–Ba/γ-Al2O3 NSR catalysts”
Appl. Catal. B: Environmental, 64, 25-34 (2006).
06.03) I. Nova, L. Lietti, L. Castoldi, E. Tronconi, P. Forzatti
“New insights in the NOx reduction mechanism with H2 over Pt-Ba/γ-Al2O3 lean NOx trap catalysts
under near isothermal conditions”
J. Catal., 239, 244-254 (2006).
06.04) I. Tavazzi, A. Beretta, G. Groppi, P. Forzatti
”Development of a molecular kinetic scheme for methane partial oxidation over a Rh/α-Al2O3 catalyst”
J. Catal., 241, 1-13 (2006)
06.05) P. Forzatti, L. Castoldi, I. Nova, L. Lietti, E. Tronconi
”NOx removal catalysis under lean conditions”
Catal. Today, 117, 316-320 (2006).
06.06) I. Pasquon, P. Forzatti
“10.1. The Petrochemical Industry”
Encyclopaedia of Hydrocarbons, Vol II: Refining and Petrochemicals, 407-453 (2006)
[Istituto della Enciclopedia Italiana fondata da Giovanni Treccani].
“10.1. La grande industria petrolchimica”
Enciclopedia degli Idrocarburi, Vol II: Raffinazione e Petrolchimica, 407-453 (2006)
[Istituto della Enciclopedia Italiana fondata da Giovanni Treccani].
06.07) P. Forzatti, F. Arosio, C. Cristiani
”Structured catalysts for environmental and energetic applications”
Advances in Science and Technology, 45, 2188-2197 (2006).
06.08) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti
”A low temperature pathway operating the reduction of stored nitrates in Pt-Ba/Al2O3 lean NOx trap
systems”
SAE 2006-01-1368
06.09) P. Forzatti, L. Castoldi, I. Nova
”Tecnologie catalitiche per la rimozione degli NOx da turbine a gas”
La Termotecnica, LX (10), 65-69 (2006)
06.10) P. Forzatti, G. Groppi, P. Ciambelli, D. Sannino
”Preface”
Catal. Today, 117, 383 (2006)
06.11) I. Nova, A. Beretta, G. Groppi, L. Lietti, E. Tronconi, P. Forzatti
”Monolithic catalysts for NOx removal from stationary sources”.
In “Structured catalysts and reactors” 2nd Edition, Edts. A. Cybulski and J.A. Moulijn, Taylor and
Francis 2006, p. 171-214.
06.12) I.Tavazzi, M. Maestri, A. Beretta, G. Groppi, E. Tronconi, P. Forzatti
“Experimental and theoretical study of an authotermal reformer for Sct-CPO of CH4”
Abstract of papers of the American Chemical Society 231 ; 23-PETR MAR 26 2006
2007
07.01) A. Beretta, T. Bruno, G. Groppi, I. Tavazzi, P. Forzatti
“Conditioning of Rh-supported catalysts for H2 production via CH4 partial oxidation at high space
velocity”
Appl. Catal. B: Environmental, 70, 515-527 (2007)
07.02) F. Arosio, L. Castoldi, N. Ferlazzo, P. Forzatti
“Building blocks by extrusion of cement-clay pastes”
Applied Clay Science, 35, 85-93 (2007).
07.03) C. Cristiani, A. Grossale, P. Forzatti
”Study of the physico-chemical characteristics and rheological behaviour of boehmite dispersions for
dip-coating applications”
Topics in Catalysis, 42-43, (1-4) 455-459 (2007).
07.04) F. Frola, F. Prinetto, G. Ghiotti, L. Castoldi, I. Nova, L. Lietti, P. Forzatti
“Combined in situ FT-IT and TRM analysis of the NOx storage properties of Pt-Ba/Al2O3 LNT
catalysts”
Catal. Today, 126 (1-2), 81-89 (2007).
07.05) P. Forzatti, L. Castoldi, L. Lietti, I. Nova, E. Tronconi
“Identification of the reaction networks of the NOx storage/reduction in Lean NOx trap systems”
Stud Surf Sci Catal, 171, 175-208, (2007).
07.06) I. Nova, L. Castoldi, L. Lietti, E. Tronconi, P. Forzatti
”How to control the selectivity in the reduction of NOx with H2 over Pt-Ba/Al2O3 lean NOx trap
catalysts”
Topics in Catal., 42-43, 21-25 (2007).
07.07) P. Forzatti, I. Cavallotti, A. Carli
”Termovalorizzare senza emettere NOx”
Aria e Acqua, 2007 (1), 22-24.
07.08) C. Cristiani, A. Grossale, P. Forzatti
”Physico-chemical characteristics and rheological behavioir of bohemite dispersions for washcoating
supports for catalytic applications”
Topics in Catalysis 42-43, 455-459, (2007)
07.09) L. Castoldi, I. Nova, L. Lietti, E. Tronconi, P. Forzatti
“The NOx reduction mechanism by H2 under near isothermal conditions over Pt-Ba/Al2O3 lean NOx
trap systems”
Topics in Catal., 42-43, 189-193 (2007).
07.10) C. Visconti, E. Tronconi, L. Lietti, R. Zennaro, and P. Forzatti
”Development of a complete kinetic model for the Fischer-Tropsch Synthesis over Co/Al2O3 catalysts”
Chem. Eng. Sci., 62, 5338-5343 (2007).
07.11) P. Forzatti, L. Castoldi, I. Cavallotti
”Trattamento dei fumi emessi da impianti di termovalorizzazione dei rifiuti: processo DeNOx-SCR”
L’ambiente, 3/07, 20-22 (2007).
07.12) C. Visconti, L. Lietti, P. Forzatti, R. Zennaro
”Fischer-Tropsch synthesis on sulphur poisoned Co/Al2O3 catalyst”
Appl. Catal. A: General, 330, 49-56 (2007).
07.13) P. Forzatti, L. Castoldi, I. Cavallotti
”Trattamento dei fumi di emessi da impianti di termovalorizzazione: configurazione di processo e BAT
per la rimozione degli ossidi di azoto”
L’ambiente, 4/07, 14-17 (2007).
07.14) R. Matarrese, L. Castoldi, L. Lietti, P. Forzatti
”High performances of Pt-K/Al2O3 vs. Pt-Ba/Al2O3 LNT catalysts in the simultaneous removal of
NOx and soot”
Topics in Catal., 42-43, 293-297 (2007).
07.15) I. Tavazzi, A. Beretta, G. Groppi, M. Maestri, E. Tronconi, P. Forzatti
”Experimental and modeling analysis of the effect of catalyst aging on the performances of an
autothermal reformed for SCT-CPO of CH4”
Catal. Today, 129, 372-379 (2007).
07.16) E. Finocchio, G. Busca, P. Forzatti, G. Groppi, A. Beretta
”State of supported Rhodium nanoparticles for methane catalytic partial oxidation (CPO): FT-IR
studies”
Langmuir, 23 (20), 10419-10428 (2007).
07.17) I. Tavazzi, A. Beretta, G. Groppi, A. Donazzi, M. Maestri, E. Tronconi, P. Forzatti
”Catalytic Partial Oxidation of CH4 and C3H8: experimental and modelling study of the dynamic and
steady state behaviour of a pilot scale reformer”
Stud. Surf. Sci, Catal., 167, 319-324 (2007)
2008
08.01) P. Forzatti, G. Groppi, C. Cristiani
Catalytic combustion
in Handbook of Heterogeneous Catalysis” (Ertl, Knozinger, Schulth, Weitkamp Eds.), Wiley VCH,
Vol. 8, 2411-2426 (2008)
08.02) R. Matarrese, L. Castoldi, L. Lietti, P. Forzatti
”Soot combustion: reactivity of alcaline and earth-alkaline metal oxides in full contact with soot.”
Catalysis Today, Catal. Today, 136, 11-17 (2008).
08.03) L. Lietti, I. Nova, P. Forzatti
”Role of ammonia in the reduction of NOx stored over Pt-Ba/Al2O3 Lean NOx Trap catalysts”
J. Catal., 257, 270-282 (2008)
08.04) A. Beretta, A. Donazzi, G. Groppi, P. Forzatti, V. Del Santo, L. Sordelli, V. De Grandi, R. Psaro
”Testing in annular micro-reactor and characterization of supported Rh nanoparticles for the catalytic
partial oxidation of methane. Effect of the preparation procedure. »
Appl. Catal. B: Environ., 83, 96-109 (2008).
08.05) A. Donazzi, A. Beretta, G. Groppi, P. Forzatti
“Catalytic Partial Oxidation of Methane over 4% Ru/α-Al2O3 catalyst. Part I: kinetic study in annular
reactor.”
J. Catal., 255, 241-258 (2008).
08.06) A. Donazzi, A. Beretta, G. Groppi, P. Forzatti
“Catalytic Partial Oxidation of Methane over 4% Ru/α-Al2O3 catalyst. Part I: role of CO2 reforming.”
J. Catal., 255, 259-268 (2008).
08.07) I. Nova, L. Lietti, P. Forzatti
”Mechanistic apsects of the reduction of stored NOx over Pt-Ba/Al2O3 lean NOx trap systems”
Catal. Today, 136, 128-135 (2008).
08.08) M. Maestri, D.G. Vlachos, A. Beretta, P. Forzatti, G. Groppi, E. Tronconi
“Microkinetic modelling of heterogeneous catalysis: from the rate equation to the rate constant”
Chemical Engineering Greetings to Prof. Eliseo Ranzi on occasion of his 65th birthday, M. Dente
Editor, AIDIC, 295-302 (2008).
08.09) R. Matarrese, L. Castoldi, L. Lietti, P. Forzatti
”Simultaneous catalytic removal of soot and NOx from diesel exhausts”
Chemical Engineering Greetings to Prof. Eliseo Ranzi on occasion of his 65th birthday, M. Dente
Editor, AIDIC, 345-358 (2008).
08.10) P. Forzatti, L. Lietti, I. Nova
”On board catalytic NOx control: mechanistic aspects of the regeneration of Lean NOx Traps with H2”,
Energy & Environmental Science, 1, 236-247 (2008).
08.11) A. Beretta, G. Groppi, M. Lualdi, I. Gavazzi, P. Forzatti
”Experimental and Modeling Analysis of Methane Partial Oxidation – Transient and Steady State
Bahavior of Ph-coared Honeycomb Monoliths”
Ind. Eng. Chem. Res., submitted (November 2008).
08.12) L. Castoldi, R. Matarrese, L. Lietti, P. Forzatti
”Instrinsic Reactivity of Alkaline and Alkaline-earth Metal Oxide Catalysts for Oxidation of Soot”
Applied Catalysis B: Environmental, submitted November 2008.
08.13) C. Cristiani, P. Forzatti
“A comparative Study of V2O5/AC and V2O5/Al2O3 catalyst for the selective catalytic Reduction of
NO by NH3” Chemical Engineering Journal, accepted (2008)
2009
09.01) P. Forzatti, L. Lietti, E. Tronconi
”Catalytic removal of NOx under lean conditions from stationary and mobile sources”.
Studies Surf. Sci. Catal., in press (2009)
09.02) G. Groppi, C. Cristiani, A. Beretta, P. Forzatti
”Catalytic Combustion for the production of energy”
Studies Surf. Sci. Catal., in press (2009)
09.03) C. Visconti, Z. Ballova, L. Lietti, E. Tronconi, R. Zennaro, P. Forzatti
“Detailed kinetic study and modelling of the Fischer-Tropsch synthesis over a state of the art cobalt
based catalyst” in "Advances in Fischer-Tropsch Synthesis, Catalysts and Catalysis", B.H. Davis e M.
Occelli Eds., Taylor & Francis, in press (2009)
09.04) C.G. Visconti, L. Lietti, E. Tronconi, P. Forzatti, R. Zennaro, E. Finocchio
”Fischer-Tropsch Synthesis on a Co/Al2O3 Catalyst with CO2 Containing Syngas”
Applied Catalysis A: 355 (2009) 61-68.
09.05) P. Forzatti and L. Lietti
”The reducxtion of NOx stored on LNT and combined LNT-SCR systems”
Catal. Today, in press (2009)
09.06) C. Visconti, P. Forzatti, L. Lietti, E. Tronconi, R. Zennaro, S. Rossini
”Sintesi di Fisher-Tropsch su catalizzatori Co/Al2O3”
La Chimica e l’Industria, 2009, in press
BOOKS
B1. P. Forzatti, E. Tronconi
”Programmazione della sperimentazione industriale chimica”
Ed. CLUP - Milano, p. 314 (1989)
B2. P. Forzatti, L. Lietti
”Strumentazione Industriale Chimica (Volume I: elementi di regolazione)”
Ed. CUSL – Milano, p.165 (2000)
B3. P. Forzatti, L. Lietti
”Strumentazione Industriale Chimica (Volume II: strumentazione di misura e controllo)”
Ed. CUSL – Milano, p. 252 (2001)
B4. G. Groppi, C. Cristiani, L. Lietti, P. Forzatti
“Study of PdO/Pd Transformation over Alumina Supported Catalysts for Natural Gas Combustion”
in”Studies in Surface Science and Catalysis”, A. Corma, F.V. Melo, S. Mendioroz and J.L.G. Fierro
Eds., Elsevier, 130, 3081 (2000)
SPECIAL ISSUES
SI1. P. Forzatti, G. Groppi, P. Ciambelli, and D. Sannino
“Selected papers presented at the 6th International Workshop on Catalytic Combustion”
Catalysis Today, 117 (4), 383 (2006)
SI2. P. Forzatti, G. Groppi, P. Ciambelli, D. Sannino
”Catalytic Combustion, Preceeding of the 6th International Workshop on Catalytic Combustion”,
Polipress, 2005, Volume 1.
SI3. P. Forzatti, G. Groppi, P. Ciambelli, D. Sannino
”Catalytic Combustion, Preceeding of the 6th International Workshop on Catalytic Combustion”,
Polipress, 2005, Volume 2.
LIST OF PATENTS
P1) F.Trifirò, C.Banfi, I.Pasquon, P.Forzatti, C.Mazzocchia, G.Caputo
"Processo per la produzione di anidride maleica e butadiene"
Ital. Patent Appl. 949926/A 73.
P2) P.Forzatti, P.L.Villa, F.Trifirò
"Procedimento e catalizzatore per la ossidazione di olefine"
Ital. Patent Appl., 21427/A 77.
P3) P.Forzatti, P.L.Villa, F.Trifirò
"Catalizzatore e procedimento per la ossidazione di olefine"
Ital. Patent Appl., 21428/A 77.
P4) P.Forzatti, P.L.Villa,
"Procedimento e catalizzatore per la ossidazione di olefine"
Ital. Patent Appl., 19418/A 78.
P5) P.Forzatti, P.L.Villa, F.Trifirò
"Oxidation catalysts and their preparation procedure"
Europ. Patent Appl. 83200198.6 (8.2.1983).
Extended to Soviet Union, Spain, India, Japan, S.Korea, Mexico, Brasil, Turkey, Taiwan, Portugal,
United States.
P6) N. Ferlazzo, P. Forzatti
"Catalizzatori migliorati e procedimento di loro preparazione per la riduzione catalitica selettiva degli
ossidi di azoto in presenza di ammoniaca"
Brevetto Italiano MI98A 002737, 18.12.1998.
P7) N. Ferlazzo, P. Forzatti
"Riduzione catalitica selettiva in presenza di ammoniaca degli ossidi di azoto medinate l’impiego di
catalizzatori migliorati e procedimento per la preparazione dei catalizztori migliorati"
Brevetto Italiano MI98A 002738, 18.12.1998.
P8) N. Ferlazzo, P. Forzatti
"Preparazione di catalizzatori migliorati per l’abbattimento selettivo degli ossidi di azoto contenuti nei
fumi in presenza di ammoniaca"
Brevetto Italiano MI99A 002525, 3.12.1999.
P9) N. Ferlazzo, P. Forzatti
"Procedimento di preparazione di catalizzatori migliorati e loro impiego per l’abbattimento, in presenza
di ammoniaca, degli ossidi di azoto contenuti nei fumi"
Brevetto Italiano MI99A 002526, 3.12.1999.
P10) D. Carmello, A. Marsella, E. Tronconi, P. Forzatti, G. Groppi
"Metallic Monolith Catalyst Supports for Selective Gas-Phase Reactions in Tubular Fixed Bed
Reactors"
U.K. Patent Application No. 9930751.4 (Filing date 29.12.1999).
P11) D. Carmello, A. Marsella, P. Forzatti, E. Tronconi, G. Groppi
"Metallic Monolith Catalyst Support for Selective Gas Phase Reactions in Tubular Fixed Bed
Reactors”
European Patent Application EP 1 110 605 A1 (Filing date 18.09.2000)
P12) N. Ferlazzo, P. Forzatti
“Preparazione di miscela a base di argilla-cemento”
Brevetto Italiano MI 2003 A002474”, 16.12.2003
P13) N. Ferlazzo, P. Forzatti
”Preparazione per estrusione di manufatti di argilla-cemento”
Brevetto Italiano MI 2003 A002475, 16.12.2003
P14) P. Forzatti, E. Tronconi, L. Lietti, I. Nova, L. Castoldi
”Sistema catalitico ad alta efficienza”
Brevetto italiano MI 2006 A000700, 7.4.200
P15) P. Forzatti, E. Tronconi, I. Nova
”Apparato e procedimento per la riduzione del contenuto degli ossidi di azoto nei gas esausti di sistemi
di combustione”
Brevetto italiano MI 2007 A 742
P16) P. Forzatti, E. Tronconi, L. Lietti, I. Nova, L. Castoldi
”High efficciency catalytic system”
WO 2007/116422
P17) N. Ferlazzo, P. Forzatti
”Preparazione per estrusione di manufatti di argilla-cemento”
Brevetto Italiano MI 2007 A000047, 15.01.2007
P18) N. Ferlazzo, P. Forzatti
”Method of extrusion of clay-cement products”
PCT/IT2007/000915
P19) P. Forzatti, E. Tronconi, I. Nova
“Apparatus and process for reducing the content of nitrogen oxides in exhaust gases of combustion
systems”
WO 2008/126118 A1, international publication date 23 October 2008.
20) P. Forzatti, N. Ferlazzo
”Preparation of clay/cement based manufactured articles by means of extrusion”
WO 2008/087681 A2, filed 24 July 2008
P21) D. Carmello, A. Marsella, P. Forzatti, E. Tronconi, G. Groppi
”Use of metallic monolith catalyst support for selective gas phase reactions”
European Patent, EP 1 110605 B1, granted 26.11.2008 (date of filing 18.9.2000)