CNC GRINDING NOTCHING
and MARKING MACHINE
AT 710 EN
CNC GRINDING NOTCHING and MARKING MACHINE
CONTROL
OVERALL
ADDITIONAL
CENTERING MARKING
DIMENSIONS CAPABILITIES
EQUIPMENT
CAPACITY
TECHNICAL CHARACTERISTICS
Maximum roll diameter [mm]
Minimum roll diameter [mm]
Maximum roll weight fly mounted [kg]
Work piece spindle speed digital controlled [rpm]
Grinding wheel speed digital controlled [rpm]
Grinding wheel feed range [mm/min]
Rapid movement grinding wheel [mm/min]
Positioning resolution [mm]
Notching rebar diameter range [mm]
Tooling spindle speed [rpm]
Notching per roll
Notching angle
Omitting ribs
Enlarging ribs
Electroplated diamond grinding wheel outside diameter [mm]
Diamond grinding wheel bore diameter [mm]
Grinding wheel type for groove grinding
Grinding wheel type for the outside diameter grinding
Grinding wheel spindle driving power [kW]
Work piece spindle driving power [kW]
Notching tool spindle, controlled by Siemens digital motor [kW]
Maximum torque workpiece spindle [Nm]
Coolant pump motor power [kW]
Pump delivery rate [l/min]
Coolant tank capacity, approximately [l]
Total power installed, approximately kW
Rotating Turret controlled by Siemens digital motor [kW]
Automatic Profile Control [APC]
Automatic Wheel Setting
Arm for easy wheel change
Self Cleaning Coolant System
Integrated marking device
Marking speed in tungsten carbide rolls [mm/min]
Customized logos
Automatic Centering Device
for centering of grooves, ribs and marks
Automatic Measuring and Centering Device
for measuring and automatic correction of the rib depth
CBS (Corner Breaking System): Automatic chamfering of the rib edges
AL-CUT: alternate cutting for longer tool life
RE-SY: automatic program resuming
Automatic lubrication of cutting tool throung out the tool holder support
Lenght [mm]
Width [mm]
Height [mm]
Weight [kg]
CNC Control SIEMENS
Interface with roll database and network connection
Full library of groove profiles
Internet remote assistance
380
Suitable for all guide rollers
100
0-200
500-2000
0.001-1000
10000
0,001
6-18
0-500
As many as required
Free choice
Free choice
Free choice
350
127
Electroplated or metal bond
Resin bond
15,5
5
5
240
2,19
100
500
35
1
10-15
2300
2000
1900
5800
Sinumerik 840 D
Rollwork
Atomat S.p.A. Strada di Oselin 16/17
33047 Remanzacco | Udine | Italy
Tel. +39 0432 648511 Fax +39 0432 667101
www.atomat.com [email protected]
Capitale Sociale €. 1.000.000,00 i.v. Cod. Fisc. e N.reg. Imprese 02550190306
Numero REA UD - 269801 P.IVA 02550190306
Società soggetta alla direzione e coordinamento da parte di Atomat Holding S.r.l.