Direct drive gear pump-motor units DGD09 series Find out more The DGD09 series direct drive gear pumps derive from the well established mag drive MG200 series. Built to handle clean water and relatively viscous fluids at low pressure, the DGD09 series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 70 °C (158 F). The extreme compactness of its design makes it the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end. Motor version (brush type): • 3900 rpm, 24 V DC MAIN APPLICATIONS • Water purification • Syrup dispensing • Laser cooling • Vending machines • Spraying • Food processing • Water recirculation • Digital macro printing • Condensation removal MODEL NUMBER MATRIX POS Code 1 2 DGD 09 3 4 Customiz. 1 Pump series 0000 2 Gears width* 3 Elastic material 4 Motor N A01 * 4 mm gears version available upon request DGD = direct drive 09 = 9 mm N = NBR V = VITON® A01 = 1500 rpm A02 = 3400 rpm A03 = 3900 rpm 34 [1.3385] (2x)Connection For 8mm [0.3149] I. D. Pipes 119 [4.6850] 39 [1.5354] Position CODE DESCRIPTION 12.5 [0.4921] 46 [1.810] 114 [4.4881] Ø 37 [Ø 1.4566] Dimensions in mm [inches] www.fluidotech.com Direct drive gear pump-motor units DGD09 series DGD09 @ 1500 rpm Flow rate oz/s l/h 100 0.90 90 0.80 80 0.70 70 0.60 60 0.50 50 0.40 40 A 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.30 30 0.3 0.20 20 0.2 0.10 10 0.1 0 0 Pressure 0 0.25 0 0.50 5 Flow 0.75 10 1.25 15 1.50 20 1.75 0.0 2.25 bar 2.00 25 30 psi Current DGD09 @ 3400 rpm Flow rate oz/s 1.00 l/h A 200 2.0 180 1.8 160 1.6 140 1.4 120 1.2 100 1.0 80 0.8 0.60 60 0.6 0.40 40 0.4 0.20 20 0.2 0 0 1.80 1.60 1.40 1.20 1.00 0.80 Pressure 0 0.5 0 1.0 10 Flow 1.5 2.0 20 2.5 30 Current 3.0 40 3.5 0.0 4.5 bar 4.0 50 psi 60 DGD09 @ 3900 rpm Flow rate oz/s l/h A 220 2.2 200 2.0 180 1.8 160 1.6 140 1.4 120 1.2 100 1.0 0.80 80 0.8 0.60 60 06 0.40 40 0.4 0.20 20 0.2 0 0 2.00 1.80 1.60 1.40 1.20 1.00 Pressure 0 0 Flow 0.5 1 10 1.5 20 2 2.5 30 3 40 3.5 0 4.5 bar 4 psi 60 50 Current Note: Characteristics with water at 20 °C (68 F). Weight: 0.34 kg (0.74 Lb). For applications involving other fluids, high temperatures or unusual processing conditions, please consult the factory or an authorized Fluid-o-Tech distributor. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Int’l Inc. Japan 203, 2-17-19, Ebara, Shinagawa Tokyo 142-0063, Japan Tel. +81 (0) (3) 3783 9660 Fax +81 (0) (3) 3783 9661 [email protected] Fluid-o-Tech Asia (Beijing) Co., Ltd Jingwei Industrial Zone, Beifang Huairou, Beijing, 101400, PRC Tel. +86 (0) (10) 6168 4650 Fax +86 (0) (10) 6168 4651 [email protected] DGD09 en – 05/12 Ed.