Magnet drive gear pump-motor units
FG200/FG300 series
Find out more
The Fluid-o-Tech® FG series combines a 24V brushless
DC drive motor in a rotor-less configuration with a high
precision mag drive MG or PG series gear pump to deliver a high
end system capable of handling fluids in the most demanding
applications. The service life of the unit, due to fewer moving
parts and to the excellent balance of the system, is
greatly
extended compared to the traditional pump-motor units.
The integration of the pump, motor and variable speed controller
provides an electromagnetically coupled, leak free fluidic system
with a high degree of versatility. The extreme accuracy of the
design and of the finishing allows the unit to deliver a smooth
and pulsation free flow in all conditions. Different materials are
available for a wide array of fluids.
MAIN APPLICATIONS
• Medical equipment
• Cooling systems
• Hemodialysis apparatus
• Laboratory instrumentation
• Laser apparatus
• Water treatment
• Lubrication
• Sampling
• Ink-Jet printing systems
• Food processing equipment
TECHNICAL INFORMATION
Pump housing material
Gears and bushing material
Ports
Max static pressure
Max vacuum
Wet lift with water*
AISI 316L or PPS
Peek/PTFE
1/8” GAS or NPT
20 bar/290 psi
724 mmHg/28.5 inHg
~ 8 m/26.2 ft
Motor type
Speed range
Max output power
Motor IP protection
Insulation class
Unit weight
24 V BLDC
from 500 to 5000 rpm
50 W
IP 52
F
AISI 316L 910g/2lb - PPS 550g/1.2lb
* Priming ability varies with operating conditions and fluid characteristics
OPERATING RANGE
Max ambient temperature
Fluid temperature
Max torque
Min ambient temperature
40 °C/104 F
95 °C/203 F
30 mNm/4.2 in-oz at 5000 rpm
70 °C/150 F
55 °C/131 F
70 mNm/9.9 in-oz at 3500 rpm
5°C/41 F
95-105 ± 1
[3.7401-4.1338 ± 0.0393]
23-32
[0.9055-1.2598]
24
[0.9448]
48
[1.8897]
300 ± 20
[11.8109 ± 0.7873]
6 x AWG22
40 °C/104 F
40 °C/104 F
100 mNm/14.1 in-oz at 3500 rpm
57
[2.2440]
57
[2.2440]
70 ± 5
[2.7558 ± 0.1968]
10
[0.3936]
Dimensions in mm [inches]
www.fluidotech.com
Magnet drive gear pump-motor units FG200/FG300 series
Flow rate
GPH l/h
100
26
90
16
60
8
6
4
2
0
40
36
32
28
50
2V
40
2V
16
12
8
4
0
30
30
1V
20
10
0
0
1
0
2
20
3
48
44
40
36
6
60
7
80
8
100
9
10
120
11
140
12
160
13
100
Flow
Power
4V
3V
5V
120
4V
70
60
3V
50
2V
80
40
60
30
1V
40
20
1V
20
0
0
1
2
3
20
10
4
40
6
5
60
7
80
8
120
100
9
140
100
Flow
Power
4V
175
4V
3V
3V
50
70
60
150
75
90
80
200
100
0
10 bar
psi
FG200-FG300 with 13 mm gears (0.9 ml/rev)
225
20
90
80
2V
100
125
bar
psi
180
5V
140
0
0
FG200-FG300 with 9 mm gears (0.6 ml/rev)
160
28
24
12
5
180
32
16
4
40
Flow rate
GPH l/h
64 250
56
52
20
10
Pressure
60
40
1V
24
20
60
3V
3V
Flow rate
GPH l/h
200
52
44
70
50
Pressure
48
4V
5V
12
10
80
4V
Absorbed power [Watt]
18
70
90
Power
80
20
14
Flow
Absorbed power [Watt]
22
100
5V
2V
2V
50
40
30
1V
8
25
4
0
0
Pressure 0.0
0
Absorbed power [Watt]
24
FG200-FG300 with 4 mm gears (0.3 ml/rev)
20
1V
0.5
1.5
1.0
10
20
2.0
30
10
3.0
2.5
40
3.5
50
4.0
60
0
4.5 bar
psi
Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use a filter before the pump inlet no larger than 10 micron.
Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
Fluid-o-Tech srl
Via Leonardo da Vinci, 40
20094 Corsico, Milano, Italy
Tel. +39 02 9995 01
Fax +39 02 9995 0999
[email protected]
Fluid-o-Tech Int’l Inc.
161 Atwater St.,
06479 Plantsville CT (USA)
Tel. +1 (860) 276 9270
Fax +1 (860) 620 0193
[email protected]
Fluid-o-Tech Int’l Inc. Japan
203, 2-17-19, Ebara, Shinagawa
Tokyo 142-0063, Japan
Tel. +81 (0) (3) 3783 9660
Fax +81 (0) (3) 3783 9661
[email protected]
Fluid-o-Tech Asia
(Beijing)
Co., Ltd
Jingwei Industrial Zone,
Beifang Huairou, Beijing, 101400, PRC
Tel. +86 (0) (10) 6168 4650
Fax +86 (0) (10) 6168 4651
[email protected]
FG200/FG300 en – 06/13 Ed.