ELENCO DELLE PUBBLICAZIONI SCIENTIFICHE
P1)
L.Fellin, A.Maschio, P.L.Mondino, G.Rostagni, A.Stella: “Some technical aspects in
the construction and use of the Padua toroidal device ‘Eta-Beta’”. Proc. of the 8th
Symposium on Fusion Technology, Noordwijkerout, 1974, pp. 23–38.
P2)
A.Buffa, S.Costa, G.Favarin, L.Fellin, G.Malesani, A.Maschio, P.L.Mondino,
G.F.Nalesso, S.Ortolani, G.Rostagni, A.Stella: “Esperienze su plasmi ad alto beta in
geometria toroidale presso il Centro Gas Ionizzati del CNR e dell'Università di
Padova”. Rendiconti 76a Riunione Annuale A.E.I., Bari, 1975, A.50.
P3)
L.Fellin, A.Maschio, P.L.Mondino, G.Rostagni, A.Stella: “Storage capacitors, start
and crowbar switches and inductors for high beta plasma experiments”. Energy
storage, compression and switching, 1976, Plenum Publishing Corporation, New York,
pp. 501-505.
P4)
L.Fellin, A.Maschio, P.L.Mondino, G.Rostagni, A.Stella: “Eta-Beta II: outline of the
basic design”. Rapporto Università di Padova, UPee 76/03, Padova, 1976.
P5)
A.Maschio: “Arc behaviour effects in pressurized spark gaps in the millisecond
range”. Proc. of the 9th Symposium on Fusion Technology, Garmisch, 1976,
pp. 771-776.
P6)
G.Marchesi, A.Maschio: “Influence of electrode materials on arc voltage waveforms
in pressurized field distortion spark gaps”. Proc. of the 5th International Conference on
Gas Discharges, Liverpool, 1978, pp. 145-148.
P7)
A.Maschio, P.L.Mondino: “Sulla realizzazione di contattori a scarica con innesco
comandato per tensioni da zero a quella nominale”. “L'Elettrotecnica”, vol. LXV,
n. 11, 1978, pp. 987-1016.
P8)
L.Fellin, A.Maschio, A.Stella: “Design of the reverse field pinch experiment Eta-Beta
II”. Proc. of the 10th Symposium on Fusion Technology, Padova, 1978, pp. 61-68.
P9)
L.Fellin, A.Maschio, A.Stella: “Eta-Beta II: macchina e impianti”. Rapporto
Università di Padova, UPee 79/13, Padova, 1979.
P10)
L.Fellin, A.Maschio, A.Stella: “Experimental tests and performances of the reverse
field pinch device Eta-Beta II”. Proc. of the 8th Symposium on Engineering Problems
on Fusion Research, San Francisco, 1979, pp. 1108-1112.
P11)
L.Fellin, A.Maschio, A.Stella: “Il progetto Eta-Beta II”. Quaderni de “La Ricerca
Scientifica”, Roma, 1980, pp. 182-185.
P12)
A.Maschio: “Toroidal field winding and modifications to the shell and liner design” e
“Parameters and waveforms analysis of the toroidal field circuit” in AA.VV. “RFX 2
MA project: Padova design studies”. Rapporto Università di Padova, UPee 80/04,
Padova, 1980.
P13)
A.Maschio: “Toroidal field circuit for a large RFP experiment”. Proc. of the 11th
Symposium on Fusion Technology, Oxford, 1980, pp. 835-840.
P14)
L.Fellin, M.Guarnieri, A.Maschio, R.Piovan: “Theoretical and experimental
evaluation of the parameters in the new configuration of Eta-Beta II”. Proc. of the 9th
Symposium on Engineering Problems on Fusion Research, Chicago, 1981,
pp. 1688-1691.
P15)
C.Majorana, A.Maschio, B.Schrefler, F.Brunello: “Electrical, thermal and mechanical
aspects in the design of the RFX vacuum vessel”. Proc. of the 12th Symposium on
Fusion Technology, Jülich, 1982, pp. 333-338.
P16)
A.Maschio, P.Tenti: “Closed-loop control of plasma current and toroidal field in
RFX”. Proc. of the 10th Symposium on Fusion Engineering, Philadelphia, 1983,
pp. 391-394.
P17)
A.Maschio, S.Ortolani, R.Piovan: “Study of the RFX circuits with a 0-dimensional
plasma model”. Proc. of the 10th Symposium on Fusion Engineering, Philadelphia,
1983, pp. 633-636.
P18)
G.Rostagni, A.Maschio, et al.: “The RFX project: a design review”. Proc. of the 13th
Symposium on Fusion Technology, Varese, 1984, pp. 189-201.
P19)
I.Benfatto, A.Maschio: “Design criteria for the switching units of the RFX
experiment”. Proc. of the 5th IEEE Pulsed Power Conference, Arlington, 1985,
pp. 186-189.
P20)
A.DeLorenzi, E.Gaio, T.A.Mace, A.Maschio, R.Piovan: “Power supply protection
against plasma disruption and fault conditions in the RFX experiment”. Proc. of the
5th IEEE Pulsed Power Conference, Arlington, 1985, pp. 190-193.
P21)
I.Benfatto, A.DeLorenzi, E.Gaio, A.Maschio, R.Piovan, P.Tenti: “Analysis of RFX
operation by complete simulation of the machine-supply system”. Proc. of the 11th
Symposium on Fusion Engineering, Austin, 1985, pp. 720-723.
P22)
A.Maschio, R.Piovan: “DC thyristor switching units for fusion experiments”. Proc. of
the 14th Symposium on Fusion Technology, Avignon, 1986, pp. 909-914.
P23)
A.Maschio: “RFX poloidal field power supply”. Proc. of the International Workshop
on Engineering Design of the Next Step Reversed Field Pinch Devices, Los Alamos,
1987, pp. 293-302.
P24)
I.Benfatto, A.DeLorenzi, A.Maschio: “Analysis of the transient voltage distribution
due to the energy transfer units on the RFX poloidal windings”. Proc. of the 12th
Symposium on Fusion Engineering, Monterey, 1987, pp. 389-392.
P25)
E.Gaio, A.Maschio, R.Piovan, P.Bordignon, A.Boselli, S.Tenconi, G.Torri: “The RFX
modular AC/DC converter system”. Proc. of the 15th Symposium on Fusion
Technology, Utrecht, 1988, pp. 1460-1464.
P26)
I.Benfatto, A.Maschio, S.Manganaro: “DC breaking tests up to 55 kA in a single
vacuum interrupter”. “IEEE Transactions on Power Delivery”, vol. 3, n. 4, 1988,
pp. 1732-1738.
P27)
A.DeLorenzi, L.Fellin, A.Maschio, V.Toigo: “The RFX pulse transmission network”.
Proc. of the 13th Symposium on Fusion Engineering, Knoxville, 1989, pp. 1201-1205.
P28)
I.Benfatto, F.Feilcke, A.Maschio, D.Rösler, H.Weyer: “The RFX energy transfer
units”. Proc. of the 13th Symposium on Fusion Engineering, Knoxville, 1989,
pp. 1384-1387.
P29)
E.Gaio, A.Maschio, R.Piovan, S.Tenconi: “Fault analysis and special tests on thyristor
for RFX AC/DC converters”. “IEEE Transactions on Power Delivery”, vol. 5, n. 1,
1990, pp. 372-378.
P30)
A.DeLorenzi, J.W.Gray, M.B.Hood, A.Maschio: “The RFX 4.8 MJ toroidal capacitor
bank”. Proc. of the 16th Symposium on Fusion Technology, London, 1990,
pp. 1654-1658.
P31)
I.Benfatto, A.DeLorenzi, A.Maschio, W.Weigand, H.P.Timmert, H.Weyer: “Life tests
on vacuum switches breaking 50 kA unidirectional current”. “IEEE Transactions on
Power Delivery”, vol. 6, n. 2, 1991, pp. 824-832.
P32)
P.Kusstatscher, A.Maschio, et al.: “Installation and commissioning of the RFX load
assembly”. Proc. of the 17th Symposium on Fusion Technology, Roma, 1992,
pp. 717-721.
P33)
P.Collarin, J.W.Gray, C.Gross, M.B.Hood, A.Maschio, H.P.Timmert: “Multistage
make switches in the power supply system of RFX”. Proc. of the 17th Symposium on
Fusion Technology, Roma, 1992, pp. 827-831.
P34)
L.Fellin, A.Maschio, et al.: “Integration of RFX electromagnetic circuits”. Proc. of the
17th Symposium on Fusion Technology, Roma, 1992, pp. 842-846.
P35)
P.Campostrini, M.Guarnieri, M.B.Hood, A.Luchetta, A.Maschio, V.Schmidt, A.Stella:
“The global fast protection system of RFX”. Proc. of the 17th Symposium on Fusion
Technology, Roma, 1992, pp. 1022-1026.
P36)
The RFX Team: “First results on the RFX reversed field pinch experiment”. Proc. of
the 14th International Conference on Plasma Physics and Controlled Nuclear Fusion
Research, Würzburg, 1992, vol.II, pp. 583-595.
P37)
V.Antoni, A.Maschio, et al.: “Confinement studies on RFX”. “Plasma Physics and
Controlled Fusion”, vol. 35, n. 12B, 1993, pp. B333-B342.
P38)
I.Benfatto, P.Collarin, A.DeLorenzi, L.Fellin, E.Gaio, J.W.Gray, M.B.Hood,
A.Maschio, R.Piovan, V.Toigo: “I sistemi di alimentazione della macchina RFX”.
Rendiconti 93a Riunione Annuale A.E.I., Ancona, 1993, vol.3, pp. 55-62.
P39)
G.Rostagni, A.Maschio, et al.: “La macchina RFX per ricerche sulla fusione
termonucleare controllata”. Rendiconti 93a Riunione Annuale A.E.I., Ancona, 1993,
vol.3, pp. 83-91.
P40)
P.L.Mondino, I.Benfatto, Y.Gribov, M.Matsukawa, K.Odajima, A.Portone, A.Roshal,
B.Bareyt, E.Bertolini, J.M.Bottereau, M.Huart, A.Maschio, S.Bulgakov, V.Kuchinski:
“The ITER poloidal field system: control and power supplies”. Proc. of the 18th
Symposium on Fusion Technology, Karlsruhe, 1994, pp. 869-872.
P41)
V.Antoni, A.Maschio, et al.: “Comparison of different RFX operation modes”. Proc.
of the 15th International Conference on Plasma Physics and Controlled Nuclear Fusion
Research, Sevilla, 1994, vol.II, pp. 405-413.
P42)
A.Maschio, R.Piovan, I.Benfatto, P.Collarin, A.DeLorenzi, L.Fellin, E.Gaio,
J.W.Gray, M.B.Hood, V.Toigo: “The power supply system of RFX”. “Fusion
Engineering and Design”, vol. 25, n. 4, 1995, pp. 401-424.
P43)
A.Maschio: “The engineering development program of RFX”. Proc. of the 16th
Symposium on Fusion Engineering, Champaign, 1995, pp. 1389-1394.
P44)
A.Maschio, E.Bertolini, J.M.Bottereau, D.Crisford, G.D'Andrea, A.DeLorenzi,
S.Geeves, H.Lefebvre, G.Murphy, P.Scarpellini: “Assessment of the suitability of the
european 400 kV grid to supply the ITER load”. Proc. of the 16th Symposium on
Fusion Engineering, Champaign, 1995, pp. 178-181.
P45)
A.Roshal, B.Bareyt, I.Benfatto, E.Bertolini, J.M.Bottereau, S.Bulgakov, N.Daniel,
D.Hrabal,
M.Huart,
V.Kuchinski,
A.Maschio,
M.Matsukawa,
N.Mikhailov,
P.L.Mondino, A.Nerem, C.Neumeyer: “ITER coil power supply”. Proc. of the 16th
Symposium on Fusion Engineering, Champaign, 1995, pp. 248-251.
P46)
I.Benfatto, P.L.Mondino, A.Roshal, A.Coletti, D.Hrabal, A.Maschio, R.Piovan,
S.Tenconi, S.Bulgakov, V.Kuchinski: “AC/DC converters for the ITER poloidal field
system”. Proc. of the 16th Symposium on Fusion Engineering, Champaign, 1995,
pp. 658-661.
P47)
B.Bareyt, I.Benfatto, P.L.Mondino, A.Roshal, T.Bonicelli, A.Maschio, D.Hrabal,
J.M.Bottereau, S.Bulgakov, V.Kuchinski, N.Mikhailov: “The switching network and
discharge circuit of ITER”. Proc. of the 19th Symposium on Fusion Technology,
Lisboa, 1996, pp. 1059-1062.
P48)
V.Antoni, A.Maschio, et al.: “Status of RFX experiment”. Proc. of the 16th
International Conference on Plasma Physics and Controlled Nuclear Fusion Research,
Montreal, 1996, vol.II, pp. 711-721.
P49)
P.Bettini, A.DeLorenzi, G.Frello, A.Maschio, P.L.Mondino: “Effects of the fast
discharge system on the ITER toroidal and poloidal field circuits”. Proc. of the 17th
Symposium on Fusion Engineering, San Diego, 1997, pp. 709-712.
P50)
D.Desideri, V.Antoni, M.Bagatin, W.Baker, A.DeLorenzi, A.Maschio, M.Monari,
P.Zaccaria: “Design and construction of a movable in-vessel power electrode in RFX”.
Proc. of the 17th Symposium on Fusion Engineering, San Diego, 1997, pp. 568-571.
P51)
F.Bellina, P.Bettini, P.Campostrini, A.DeLorenzi, E.Gaio, D.Hrabal, A.Luchetta,
A.Maschio, R.Piovan, E.Sachs, V.Toigo, P.Zaccaria: “Design, construction and
operation of the 66 kA life test facility for the ITER magnet protection vacuum circuit
breaker”. Proc. of the 17th Symposium on Fusion Engineering, San Diego, 1997,
pp. 1137-1140.
P52)
P.Bettini, A.DeLorenzi, A.Maschio: “Parametric analysis of current extinction in
counterpulse system”. “Plasma devices and operation”, vol. 6, n. 1-3, 1998,
pp. 181-192.
P53)
A.Roshal, B.Bareyt, I.Benfatto, N.Britousov, P.L.Mondino, T.Bonicelli, P.Bordignon,
A.Galli, D.Hrabal, A.Maschio, S.Bulgakov, V.Kuchinski: “Status of ITER coil power
supply design”. “Plasma devices and operation”, vol. 6, n. 1-3, 1998, pp. 193-202.
P54)
E.Gaio,
A.Maschio,
R.Piovan,
V.Toigo,
G.Candela,
A.Coletti,
I.Benfatto,
P.L.Mondino, A.Roshal, P.Bordignon, A.Galli, A.Piazzesi “Main technological
aspects of the ITER ac/dc converter system”. Proc. of the 20th Symposium on Fusion
Technology, Marseille, 1998, pp. 861-864.
P55)
R.Bartiromo, A.Maschio, et al.: “Recent progress in RFP research on the RFX
experiment”. “Nuclear Fusion”, vol. 39, n. 11Y, 1999, pp. 1697-1705.
P56)
V.Antoni, A.Maschio, et al.: “Transport mechanisms and enhanced confinement
studies in RFX”. “Nuclear Fusion”, vol. 41, n. 4, 2001, pp. 431-436.
P57)
A.Roshal, B.Bareyt, I.Benfatto, N.Britousov, D.Hrabal, K.Krueger, A.Maschio,
P.L.Mondino, T.Shoji: “The ITER-FEAT power supply system and interface with the
site HV power grid”. “Fusion Engineering and Design”, vol. 58-59, 2001, pp. 87-91.
P58)
P.Martin, A.Maschio, et al.: “New insights into MHD dynamics of magnetically
confined plasmas from experiments in RFX”. “Nuclear Fusion”, vol. 42, n. 3, 2002,
pp. 247-257.
P59)
A.Maschio: “The structure of the power supplies for ITER-FEAT additional heating
and current drive systems”. “Plasma devices and operation”, vol. 11, n. 2, 2003,
pp. 111-122.
P60)
D.Desideri, A.Maschio: “Magnetic field emissions up to 400 kHz from a welding
equipment”. Proc. of the EMC Europe 2006, Barcelona, 2006, pp. 151-156.
P61)
D.Desideri, A.Maschio, E.Poli: “Environmental analysis of the electric field due to
MV overhead lines supported by concrete poles”. Proc. of the 4th International
Workshop on Biological Effects of EMFs, Crete, 2006, pp. 876-883.
P62)
D.Desideri, A.Maschio: “Development of a simple and low cost magnetic field
measurement equipment up to 400 kHz”. Proc. of the 4th International Workshop on
Biological Effects of EMFs, Crete, 2006, pp. 884-890.
P63)
D.Desideri, A.Maschio, A.Zuccato: “Design of a new low cost two-port TEM
cell”. Proc. of XIII Symposium on Electromagnetic Fields in Mechatronics,
Electrical and Electronic Engineering, ISBN 978-80-01-03784-3, Praha, 2007.
P64)
D.Desideri, M.Guarnieri, A.Maschio, F.Moro: “Experimental validation of a
three-dimensional integral model for thin non-magnetic screens”. Proc. of XIII
Symposium on Electromagnetic Fields in Mechatronics, Electrical and
Electronic Engineering, ISBN 978-80-01-03784-3, Praha, 2007.
P65)
D.Desideri, A.Maschio, E.Poli: “Analytical formulas of the electric field near a
reinforced concrete pole of a MV line”. Proc. of the 18th Int. Zurich Symposium
on EMC, München, 2007, pp. 353-356.
P66)
D.Desideri, A.Maschio, E.Poli: “Electric field exposure near the poles of a MV
line”. 2008, Advanced Computer Techniques in Electromagnetics, IOS Press,
Amsterdam, pp. 363-369.
P67)
D.Desideri, A.Maschio, P.Mattavelli: “Human exposure to pulsed current
waveforms below 100 kHz”. Proc. of the EMC Europe 2008, Hamburg, 2008,
pp. 391-396.
P68)
D.Desideri, A.Maschio, E.Poli: “Human exposure to electric fields under an
overhead MV power line”. Proc. of 43rd Universities Power Engineering
Conference UPEC 2008, ISBN 978-88-89884-09-6, Padova, 2008.
P69)
D.Desideri, M.Guarnieri, A.Maschio, F.Moro: “Magnetic shielding of MV/LV
substations: numerical modeling and experimental validation”. Proc. of 43rd
Universities Power Engineering Conference UPEC 2008, ISBN 978-88-8988409-6 , Padova, 2008.
P70)
D.Desideri, A.Maschio, M.Spolaore: “Design and realization of a magnetron
sputtering
device
for
deposition
of
electromagnetic
shields”.
Acta
Electrotehnica, Special issue, Proc of the 2nd International Conference on
Modern Power Systems MPS 2008, Cluj-Napoca, 2008, pp. 294-297.
P71)
D.Desideri, A.Maschio: “Preliminary tests on a low cost two-port TEM cell”.
Acta Electrotehnica, Special issue, Proc of the 2nd International Conference on
Modern Power Systems MPS 2008, Cluj-Napoca, 2008, pp. 298-301.
P72)
D.Desideri, O.Miron, A.Maschio, D.D.Micu: “Reconstruction of an equivalent
magnetostatic source of a magnetron sputtering device”. Acta Electrotehnica,
vol. 51, n. 5, Special issue, Proc of the 3rd International Conference on Modern
Power Systems MPS 2010, Cluj-Napoca, 2010, pp. 119-122.
P73)
D.Desideri, A.Maschio, P.Mattavelli: “Parametric analysis of GMAW-P waveforms
for the derivation of human exposure values”. “Brazilian Journal of Biomedical
Engineering”, vol. 26, special issue, 2010.
P74)
D.Desideri, A.Maschio: “Development and commissioning of a test system based on a
TEM cell for RF exposure”. “Brazilian Journal of Biomedical Engineering”, vol. 26,
special issue, 2010.
P75)
P.Alotto, D.Desideri, F.Freschi, A.Maschio, M.Repetto: “Dual-PEEC Modeling of a
Two-Port TEM Cell for VHF Applications”. “IEEE Transactions on Magnetics”,
vol. 47, n. 5, 2011, pp. 1486-1489.
P76)
D.Desideri, A.Maschio, D.D.Micu, O.R.Miron: “Identification of an equivalent model
for the permanent magnets of a magnetron sputtering device” Accepted for publication
in “COMPEL”.
P77)
O.Miron, D.Desideri, D.D.Micu, A.Maschio, A.Ceclan, L.Czumbil: “Estimation of an
equivalent short solenoid model using a regularization procedure”. Accepted for
publication in “Archives of Electrical Engineering”.
P78)
D.Desideri, A.Maschio, P.Mattavelli: “Human exposure during operation of GMAWP welding machine”. Accepted for publication in “COMPEL”.
P79)
D.Desideri, A.Maschio, M.Bolzan, M.Natali, M.Spolaore: “Characterization of
nanostructured copper films for electromagnetic shields”. Accepted for publication in
“COMPEL”.
P80)
O.Miron, D.Desideri, A.Maschio, P.Alotto, D.D.Micu: “Numerical analysis of a new
experimental set-up for measurements of shielding effectiveness”. Proc. of 46th
Universities Power Engineering Conference UPEC 2011, Soest, 2011.
P81)
D.Desideri, A.Maschio: “A new version of coaxial holder with continuous conductor
for tests on planar films”. Accepted for publication in “International Journal of
Applied Electromagnetics and Mechanics”.
P82)
D.Desideri, A.Maschio, D.D.Micu, O.R.Miron, M.Spolaore: “Equivalent model of a
magnetron sputtering device with ferromagnetic yoke”. Proc. of XV Symposium on
Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF
2011, Madeira, 2011.
ELENCO DELLE PUBBLICAZIONI DIDATTICHE
D1)
M.Fauri, F.Gnesotto, G.Marchesi, A.Maschio: “Lezioni di Elettrotecnica - vol. I Elettrotecnica generale”. II edizione. Società Editrice Esculapio, Bologna, 2002.
D2)
M.Fauri, F.Gnesotto, G.Marchesi, A.Maschio: “Lezioni di Elettrotecnica - vol. II Applicazioni elettriche”. Società Editrice Esculapio, Bologna, 2002.
D3)
M.Fauri, F.Gnesotto, G.Marchesi, A.Maschio: “Lezioni di Elettrotecnica - vol. III Esercitazioni”. II edizione. Società Editrice Esculapio, Bologna, 2003.
D4)
M.Bagatin, G.Chitarin, D.Desideri, F.Dughiero, F.Gnesotto, M.Guarnieri, A.Maschio:
“Esercizi di Elettrotecnica – Reti elettriche”. Società Editrice Esculapio, Bologna,
2005.