muteki
energy
en
TUNNEL14
Lighting for motorway underpasses
and underground metro tunnels
muteki
TUNNEL14
energy
TUNNEL14 is a light fitting designed for assembly inside challenging settings, such as tunnels and underpasses, where the
pollutant dusts and hydrocarbons tend to chemically attack products, damaging them and lowering their lighting technology
performance levels.
The basic product comprises a power supply module and a LED module. The power supply module can manage up to 4 LED
modules, which correspond to a system with 224 LEDs 400 W.
The optical system, housed in an IP66 casing which protects it against water, dust and vibrations, was designed to guarantee
uniform, stable and durable lighting with reduced glare.
The optics have levels of efficiency and luminous flux distribution that allow installation of the light fittings at a higher spacing
rate than the minimum declared by the applicable regulations.
The product can be tilted using a purpose-designed bracket, which can be secured to the busbar or using a suspension system.
TUNNEL14 is a product designed and produced entirely in Italy.
APPLICATION
Lighting for motorway underpasses and underground metro tunnels
MECHANICAL FEATURES
Lamp body: aluminium
Front Screen: tempered glass 4mm thickness foam seal sealed to the lamp body
Weight: <7 Kg
Installation: busbar or suspension system
Humidity protection: anti condensation valve
Cooling: heat dispersion system sized to guarantee optimum performance/output and expected life
exceeding 50,000 hours
Mechanical Protection: IK 08 (IEC EN62262)
Protection: IP 66
Working Temperature: from -30°C to + 55° C
LED & OPTICS SYSTEM
Number of Luminous sources 40
48
56
Colour temperatureNatural white 4000° K ± 5% / Pure white 5000° K ± 5%
Lamp luminous flux (lm) 7990/8674 9586/10.400 Electrical absorption per LED Luminous flux per LED
1
1184/12.140
1,8 W
235 lm / 600 mA @4000° K | 255 lm/ 600mA @5000° K
Dimmable luminous flux
da 20 a 100%
Optical efficiency
0,85
CRI
> 80
Emission angle
140°
Voltage
1
90 V ac - 264 V ac
ELECTRICAL CHARACTERISTIC
Source absorbed power
72W
86W
101W
Total absorbed power
79W
95W
111W
Power supply efficiency
Frequency
Electrical class 91%
50-60 Hz
I, II , SELV* (IEC EN60598)
*available for modules with powers of up to 50 W
Muteki energy Piazza Manifattura, 1 - 38068 Rovereto TN - tel +39 0464 443383 - fax +39 0464 443420 - [email protected] - www.mutekienergy.com
muteki
TUNNEL14
energy
POLAR DIAGRAM
Test report 25/2012/PH
Photometric Laboratory
Industrial Engineering Dep.
University of Padua
309
627
PRODUCT CERTIFICATION
38,5
81
CE certification
Device complies to RoHS requirements
Eco design; lamp body re-cycling 90%
FINITURA
POWER SUPPLY
DISSIPATOR
FRAME
Polyester paint
light grey RAL 7035
black grey RAL 7021
CIRCUIT
GLASS
Copyright OSRAM
ENERGY SAVING FEATURES
Type
N° Led
Wtot
Reference
True consum. Lamp SAPSAP
Energy
saving
Annual energy saving 4.380 hours/year
CO2 emission saving
TUNNEL1440
40
79 125W 150W 71W 311kWh/year 215 kg/ year
TUNNEL1448
48
95 150W 180W 85W
372kWh/year 257 Kg/year
TUNNEL1456
56
111 250W
280W
169W
740kWh/year 511 Kg/year
Muteki energy Piazza Manifattura, 1 - 38068 Rovereto TN - tel +39 0464 443383 - fax +39 0464 443420 - [email protected] - www.mutekienergy.com
muteki
energy
Muteki is inside the
“green innovation factory“
of Progetto Manifattura
Piazza Manifattura, 1
38068 Rovereto TN
tel +39 0464 443383
fax +39 0464 443420
[email protected]
www.mutekienergy.com
Scarica

TUNNEL14 - Muteki energy