COMPANY PROFILE
The Mediterranean Aerospace Society SAM is composed by fifteen SMEs operating in
the aeronautic and space sector. SAM, a simultaneous engineering system, is one of
the first Italian example of SMEs aggregation in the aerospace sector.
SAM has been founded to both meet market needs and take advantage of all the
development opportunities coming from national and international economic recovery.
M.T. Srl
COMPANY PROFILE
Headquarters
Via G. Pascoli. 7
80026 Casoria
Naples - Italy
2005 Data
(aggregated data)
Employed
1065
Sales proceeds
115 M€
R&D Investments 10 M€
BOARD OF DIRECTORS
PRESIDENT
Mr. Luigi Iavarone
M.T. Srl
Mr. Vincenzo Buonocore
MAROTTA Srl
Mr. Pasquale Grosso
TECNOIN Srl
Mr. Davide Sala
FOX BIT Srl
Mr. Antonio Scarpetta
SALVER Srl
Mr. Paolo Graziano
TECNAM Srl
Mr. Amedeo Fogliano
GEVEN Srl
Mr. Getulio Veneruso
VULCAN AIR Spa
Mr. Carlo De Feo
CARLO GAVAZZI SPACE Spa
Mr. Lanfranco Zucconi
MAGNAGHI Aeronautica Spa
Mr. Paolo Graziano
TECHNOSYSTEM Srl
Mr. Francesco Monti
NUOVA AVIORIPRESE Srl
Mr. Salvatore Savanelli
ACTIVITIES
design, manufacturing and
aircraft maintenance activities,
development and
manufacturing of mechanical
and electronic apparatus for
aeronautic-space industry
advanced technology services on
earth observation implemented
through satellite and avionic
platforms for monitoring and
surveillance of territorial
environment parameters
INDUSTRY
TECHNOLOGY SKILLS
AERONAUTIC SECTOR














general aviation aircraft design and manufacture
general and commercial aviation aircraft maintenance
and fixing
avioelectronic board programmes’ upgrading
territorial monitoring by multispectrum sensors
crew and technical staff training and qualification
interiors and structures mechanical and electronic
designing
aircraft carrier certifications and interiors manufacture
and/or maintenance
prototyping and reverse engineering
patterns ratification
aircraft’s subsystems mechanical and electronic
production
software development
No-destructive controls and surface treatments
aerospace qualification and testing
SPACE SECTOR


design and manufacturing of space
infrastructures and payloads for
scientific and commercial missions,
environmental monitoring, telematic and
applications
design, development and manufacturing
of on board and ground electronic
equipment
SERVICES
EARTH OBSERVATION
Characteristics
Integrated earth observation
system through satellite and
avionic platform using
multisensor technologies and
possessing operating
characteristics enabling data
acquisition via diverse sensors
in a single mission
ground segment which
guarantees data in the field of
Geographic Information 24/7 for
environmental monitoring and
surveillance services, mapping and
value added information for GIS
and DDS systems
SERVICES
EARTH OBSERVATION
Applications
Mapping of burnt areas
Monitoring of hydro-geological instability
Monitoring of urban environments
Monitoring of rubbish dumps
Mapping of vegetation and agricultural areas
P68 OBSERVER
P68 OBSERVER
Mini
Satellite
Italiano a Tecnologia
Italian
advanced
technology
Avanzata
(MITA)
Mini
Satellite
(MITA)
Monitoraggio della frana di
Landslide
monitoring of
Sarno (NA)
Sarno area (Naples)
THE COMPANIES
AXITUDE
M.T. Srl
M.T. S.r.l.
Aircraft Division
Design, Research &
Development
Planning & Production
Marketing & Customer
Support
Technical assistance
Spares upgrading
Training
Today production :
P 68 C
P 68 C – TC
P 68 OBSERVER 2
P 68 TC OBSERVER
AP 68 TP – 300 / 600
SF 600A
Vulcan Air Spa
Via G. Pascoli 7, 80026 Casoria– Italy
Tel. 0039-081 59 18 111
Fax 0039-081 59 18 173
E-mail [email protected]
Website www.vulcanair.com
Maintenance Division
GENERAL AVIATION
• A/C reconfiguration
• Major maintenance check
and modifications
• Line maintenance
COMMERCIAL AVIATION
• ATR 42-300/320 SERIES
• ATR 72-200 SERIES
• MD 80
New type
P68
Flight Operations Division
Aerial Survey
Ortho-photogrammetry
Map making
Thermography
Cartography and Topography
Aero photography
Public transport pax and freight
Flight school
Mission
Design and Manufacturing of advanced avionic
systems for General Aviation
AXITUDE S.r.l.
Via G. Pascoli, 7
80026 Casoria (NA) – Italy
Tel. 0039-081 59 18 132
Fax 0039-081 59 18 172
Applications and related fields:
- Avionics
- Platform Stabilization
- Unmanned Vehicle Navigation
Product line
 Attitude & Heading Reference System (AHRS)
 PFD/MFD 4D-Nav (Synthetic Vision, Tunnel into the sky, Map Viewer)
 Standard/Custom Engine Monitor
 Integrated Modular Avionics
The Key Factor: Human resources
The company has experienced human resources to enable it
to succeed in his mission and its guidelines for all its personnel
will be to turn their experience and confidence into valuable
assets for all customers.
AHRS
S.R.L. Costruzioni Aeronautiche Tecnam was founded in 1986 by F.lli Pascale.
The company is located in an area adjacent to the International Airport of NapoliCapodichino with an establishment measuring over 11000 square meters. A second
establishment is located in Castelvolturno and features the final assembly line, and a flight
field where flight tests are carried out. The Company's interests are divided into two main
activities: The first pertains to the construction and assembly of structural components for
commercial aviation; among these components are the tailplanes for the ATR 42/72, fuselage
panels for Douglas and Boeing, parts of the G222, tailplanes and moving surfaces for the
SF260, fuselage elements for the P68, helicopter components for Agusta, and other parts for
LearJet, Falcon, Dornier, etc. The Company has obtained official qualification for the use of
all above mentioned equipment and is ISO 9002 certified by Alenia, Aeronavali, Aermacchi,
Agusta and, for what concerns special processes, also by Douglas/Boeing.
1a Trav.Via G.Pascoli - 80026 Casoria Napoli (Italy)
Tel. 0039-081 75 83 210 Fax. 0039-08175 84 528
E-mail [email protected]
Website www.tecnam.com
The advanced ultralight:
high wing and retractable gear
PRODUCTS
Furthermore, the Company is certified by the Registro Aeronautico Italiano (cit. n. 1004/c)
with regards to the production of P92-J aircraft. The other sector of activity pertains, in fact,
to the design and manufacture of prototypes and production units for light or ultralight
aviation. Since 1992, Tecnam, drawing on an uncommon field experience of their founders,
has entered this market internationally with noteworthy results and nearly 500 aircraft
produced. The distribution network of Tecnam aircraft can rely today on dealers in all major
countries.The Company's strategy is particularly dedicated on investing resources in research
and development with the aim of continued refinement and upgrading of its products.
P96 GOLF
P92-JS
P92-2000 RG
GEVEN has a long established experience and a
world-wide recognised knowledge in providing
seating and interiors solutions for aerospace,
shipping and railway applications.
GEVEN is Certified by the JAA through ENAC-RAI as:
- JAR 21 (G) Production Organisation
- JAR 145 Maintenance Organisation
MAIN CUSTOMERS
Manufactures
• ALENIA
• AERONAVALI
• ATR
• AGUSTA
• PIAGGIO
• HELISOTA
• FOKKER
• VULCANAIR
• TECNAM
• INDONESIAN AEROSPACE
Airlines & Operators
• ALITALIA
• ATITECH
• MERIDIANA
• AIR ONE
• LAUDA AIR
• BLUE PANORAMA
• US NAVY
• LAER
• INDONESIAN AIR FORCE
• ITALIAN AIR FORCE
• COTE D’IVOIRE
GEVEN is capable to:
• design
• manufacture
• assembly
• test
• certify
• produce
• maintain
• support
• refurbish
aircraft interiors and
passenger seating solutions
Product support services
• Spare parts
• Initial provisioning assistance
• A.O.G.
• warranty
• Engineering support
• training
• consignment stock
• maintenance
• repair and overhaul
• refurbishment
• field service
Maintenance, repair and refurbishment
of the following aircraft interiors :
• DC-9
• MD80
• ATR 42
• ATR 72
• B707
• DC-10
• Learjet 45
• Cessna Citation
Geven Srl
Viale delle Industrie, 9 - Po. Box 97 - 80040 S.Sebastiano al Vesuvio NAPOLI – ITALY
Tel. 0039-081 78 69 111 Fax 0039-081 77 16 763
E-mail [email protected] - Website www.geven.com
MAGNAGHI AERONAUTICA S.p.A.
Magnaghi was born in 1936 as company working in aeronautical field (military only)
producing, landing gears, fuel tank, tank oil, engine components . Beginning from the
‘70 it begun to operate in the civil area too in collaboration with Messier, both in the
engineering and on license construction field. In the same years it has autonomously
begun the same activities in the helicopter sector. In 1998 the fusion has happened
with the Magnaghi Milano.
From 1994 Magnaghi suffered the crisis that has involved the Italian and foreign aeronautical sector. In 2001 it
has been finalised the sale to Panavia (Company of INVESCO, the Holding of Graziano group) of Magnaghi
Aerospace activity branch, located in Naples plant. On December 2001 the Panavia has changed its name
into Magnaghi Aeronautical Spa.
M
A
I
N
P
R
O
G
R
A
M
S
ALENIA: G222 – C27J –MD80
ALENIA – AERMACCHI – EMBRAER: AM-X
AERMACCHI: MB339K – S211 – SF600
AEROSPATIALE – ALENIA: ATR42-500 – ATR72
AIRBUS INDUTRIES:A300600 – A319 – A320 – A321
AGUSTA BELL: AB205 – AB206
NAMSA TORNADO (TYPHOON)
AGUSTA BOEING: CH47
R.PIAGGIO: P180
AGUSTA SIKORSKY: SH3D – HH3F
MESSIER DOWTY LTD – DASA: EF2000
AGUSTA: NH90
EH INDUSTRIES
MCDONNEL DOUGLAS: MD80
Magnaghi Aeronautica Spa
Via G. Ferraris 76, 80142 Napoli – Italy
Tel. 0039-081 59 77 268 Fax 0039-081 73 40 648
E-mail [email protected]
INTERNATIONAL COOPERATIONS
Messier Dowty LTD (U.K.), Smiths LTD (U.K.), Messier Dowty SAS (FRANCE), Messier
Bugatti (FRANCE), Hydraulic Research Textron (U.S.A.), Apph (U.K.), Embraer
(BRASIL), Lochkeed Martin (U.S.A.)
Salver Spa
Via D. Macaluso,
72100 Brindisi – Italy
Tel. 0039-0831 57 31 45
Fax 0039-0831 57 38 78
MAJOR CUSTOMERS
Alenia/Boeing
EADS Dornier
Dornier Fairchild
Officine Aeronavali
Piaggio Aero Industries
Aermacchi
Agusta
AERONAUTIC FIELD




Assembly of composite, mixed and metal parts through bonding and fastening
Production of composite aeronautic products (primarily using thermosetting prepregs)
Research and development of advanced aeronuatic parts
Project, design and manufacturing of tools necessary to production activities
SALVER Spa
METAL SUD
INVESCO ACQUISITION : 1989
INVESCO S.p.A.
MAIN ACTIVITIES: RIGID PIPELINES MANUFACTURING AND ASSEMBLING, MAINTENANCE
AND SURFACE TREATMENTS OF AIRCRAFT STRUCTURAL PARTS AND
COMPONENTS
APPROVALS/CERTIFICATION:
CUSTOMERS
PRODUCTS
° ALENIA
° ALENIA
° AIRCRAFT RIGID PIPELINE
° AIRBUS
CONTROLS
° AMS
° NON DESTRUCTIVE
° BOEING
° OFFICINE AERONAVALI
° SURFACE TREATMENTS
° AGUSTA
° AGUSTA
° HEAT TREATMENTS
° AERMACCHI
POLYURETHANE
° AERMACCHI
° EPOXIDE AND
° ALITALIA
° ALITALIA
° AQAP 120
° FIAT AVIO
PAINTINGS
° ISO 9002
° JAR 145
° EN 9100 (By October 2004)
NO. OF EMPLOYEES
INVESC
O
TURNOVER EURO/MILLION
forecast
2001
2002
2003
2004
2005 *
35
35
37
37
37
2,5
2,7
3,2
3,5
3,7 *
Marotta A.T. S.r.l. was founded as the evolution of
Marotta S.r.l specialists in the production of mechanical
precision components and has been present on the
market since 1957.
The traditional production techniques have been
substituted by completely automated processes
through the use of a Numerical Computerised Control
machine (CNC) and controlled by traditional and
electrical equipment. The production area of the
company covers a superficial area of around 1500mq
sub-divided into specialist areas.
Marotta A.T. uses a Numerical Computerised Control
machine controlled by traditional and electrical
equipment and CAD/CAM in the production and
continuing updates in real time with the planning
area. The company has developed relevant "know
how" in mechanical construction and in the processes
contained in high level technology that is used by the
majority of Italian companies such as Alenia Marconi
Systems.
Actual aeronautic production is orientated to the
provision of finished mechanical parts and assembled
for the civil and military aeronautic industry. Marotta
A.T. produces structural parts for planes such as ATR
42 and 72, AIRBUS A320, MD Douglas MD80, etc.,
but also realises components for the missile industry.
Marotta A.T. has become referral specialists on national
territory, in the realisation of equipment for aerodynamic
tests (wind tunels) and telescopes. In the last few years
Marotta A.T. has achieved positive results in space sector,
with the realisation of significant pieces for company
leaders such as Carlo Gavazzi Space S.p.A. and M.A.R.S.
(Microgravity Advanced and Support Center) and C.I.R.A.
(Centro Italiano di Ricerca Aerospaziale [Italian Centre for
Aerospace Research]).
The technologies
developed for the
mechanical
processes
today allow
Marotta A.T to accurately execute flow
panel and oxygen panels (PSU) repair
works on aeroplanes used for public
transport (MD Douglas Super 80, ATR 42,
etc). The high standard of execution is
applied to the revision/repair of aeronautic
boilers, water heaters and ovens used by
European airine companies. The complex
control techniques used in the mechanical
processes are applied in the functionality
control of the thermal switch and probes
to
record
temperature.
All
the
maintenance/repair activity executed by
Marotta A.T. certified by the National Civil
Aviation Body according to the European
JAR 145 standard are certificated by the
issue of JAA Form One that guarantees
the aero-navigability.
FIRM ACTIVITIES
•
Aerial black/white and colour for production of
cartography
•
Thematic and synthesis cartography
•
Aerial and terrestrial Photogrammetry
•
Planning and realization of informative territorial systems
•
Fallowing analysis to the aerial resumptions
for the state of erosions of the coasts
•
Infrared colour for the study of the
state of health arboreal essence
•
Thermograph and infrared colour
for the location in the sea of pollute
area and ubication of possible loss
of possible loss of
hidro-systems conduct
•
Ortophoto- paper
•
DTM territory whit Lidar
•
Systems for sight fire
•
Cartography
•
Georadar surveying
FLIGHT OPERETING FURNISCING
Nr.2 navigation system GPS inerzial traker
Nr.1 camera aerofotogrammetry Wild RC20 munita
FMC con obiettivi intercambiabili da 153 e 300 mm
Nr.1 camera aerophotogrammetry Zeiss Jena LMK 1000
with focal 153 mm and FMC
Nr.1 camera aerophotogrammetry Zeiss Top 15 with
focal 153 mm and FMC
Nr.1 camera Wescam 16 DS-M termical imaging
Nr.1 camera digital Nikon D1X with optical calibrate 20 mm
TECHNICAL DEPARTEMENT FURNISCING
Nr.3 Work-station for ortophoto-paper digital mod. DVP
Nr.3 Satellite reciver geodedic G.p.s.
Nr.3 Bromografi Zeiss tipo Zeiss KG 30
Nr.1 Developer to print and/or slides contacting Eskofot
Nr.1 Developer to print and/or slides contacting Colenta
Nr.1 Scanner photogrammetric LHZ DSW 500
Nr.1 Scanner Umax Mirage D16-L
Nr.1 Developer Film Colenta mod. 30 SW-N
Nr.2 Plotter HP5000PS UV e DMP 60 Houston Instrument
Nr.1 Work-station per ortophotopaper digital mod. Apex 7.0
Nr.10 Work-station to elaborate firm data
CARLO GAVAZZI SPACE SpA
P
R
O
F
I
L
E
C
U
S
T
O
M
E
R
S
Carlo Gavazzi Space develops space systems and
technologies for Italian and international projects and is part
of a cluster of European companies.
Its core business is design and manufacturing of satellites
and payloads for scientific and commercial missions,
unmanned space vehicles, environmental monitoring,
telematic and applications.
Founded in 1981, the company employs more than 180
qualified engineers and physicists working in close
cooperation with the leading Italian research organisations.
ASI Italian Space Agency, CIRA (Italian Aerospace
Research Centre), CNES (French Space Agency), CERN
(European Centre for Nuclear Research), CNR (Italian
National Research centre), ESA European Space Agency,
INFN (Italian Institute for Physics Research), NASA (U.S.
Space Agency), E.U. and all main European space
manufacturers.
International Space Station
Facilities & Payloads
ESA Data User Programs
for environmental monitoring
• Prime contractor at system and/or subsystem level
• Satellites: turn-key systems with standard platforms
• USV unmanned space reusable vehicles
• Payloads and scientific instruments for experiments in
microgravity
• International Space Station: facilities and payloads
• Ground Segment and Ground Support Equipments
• Scientific instruments for remote sensing and
environmental monitoring
• Systems and Services for Earth Observation
• Commercial applications of space technologies for
security, telemedicine, fleet management, surveillance
• Software Projects
• SAR image processing
• E.O. image compression
• Digital and Power electronics
• Structural /Thermal research projects
• AIT activities (Assembly,Integration,Test)
• Product Assurance & Safety
F
I
E
L
D
S
O
F
A
C
T
I
V
I
T
I
E
S
Milano • Bologna • Rivalta Scrivia (AL) • S. Giorgio del Sannio (BN)
Headquarters: Via Gallarate 150, 20151 Milano – Italy
Tel. 0039.02.380481 Fax 0039.02.3086458 - email [email protected] - web: www.cgspace.it
Fox Bit covers all the aspects of the industrial engineering – time to
product compression, through the integration of the most up-to-date
systems based on the 3D laser scansion, CAD design, structural and
dimensional analyses (FEA - CAE/CAT), and industrialization (CAM).
Fox Bit has created to the inside of the own competencies a Space
Section that has extended also to the electronics and computer
science the traditional mechanical acquaintances of the society.
CUSTOMERS
Via E. Gianturco, 31 Napoli - Italy Tel. 0039-081 73 40 777 Fax 0039-081 73 40 808
E-mail [email protected] - Website www.foxbit.
SPACE:
ASI
MARS
Oerlikon Contraves
Alenia Spazio Roma
AERONAUTIC:
Alenia Aeronautica
Fiat Avio
Geven
Tecnam
Officine Partenopee
Avio Interiors
AUTOMOTIVE:
Ferrari
Fiat Auto
Elasis
Stola
AIRBUS - A380
Electronics
ACTIVITIES
FPGA Technology
Modules for audio and video signals, digital or analogic.
High speed interfaces for telemetry / remote control
Analogic and digital devices for fixed telephony or GSM
Space Programs
Software and Information Technology
On Board SW
On Ground SW/ EGSE
Special and Industrial installation Control
Utilization of PLC. Development of control SW
Management of field and computer science net
MARSIS EGSE
Mechanics
CAD Design (ProEngineer, Unigraphics, Catia, CADDS)
Reverse Engineering using 3D laser scanning CAD
Structural and Dimensional Analyses (FEA - CAE - CAT)
Product industrialization (CAM)
Mechanical Rapid Prototyping
Standard Experiment Drawers
G.L.A.D. Experiment Containers
MARSIS EGSE & MARSIS SPARE-EGSE
SAR 2000 – EGSE A.I.S. (Antenna Interface Simulator)
CPD Coarse Pointing Device
MDS Mice Drawer System - External Container
SAR 2000 Frequency Generation Unit (FGU) Device
Millimetric Radar MMW
AGILE Payload
Aeronautic Programs
CMA SOLAR
Airbus A380: Structural design of the upper-center Fuselage section
Boeing 767 - New Interiors Configuration
ATR42 Large Cargo Door Surround: Structural design - Stress Analysis
ATR72 Large Cargo Door: Structural design - Stress Analysis
TECNO IN is an engineering service company with many years
experience, providing an authoritative reference-point for public and
private customers.
The solution of problems relating to the reliability and safety of civil,
industrial and monumental works is just part of the daily routine carried
out with rigorous precision by technical staff of TECNO IN.
The highly qualified technicians offer guaranteed experience in the
laboratory and in the field, by means of research, accurate analyses and
thorough quality control of structures and construction materials.
This company employs engineers, architects, geologists and building
surveyors, and boasts extensive competence in various operational
fields, ranging from instrumental diagnosis to monitoring and from
geotechnics to geophysics.
All TECNO IN services are the state-of-the-art support to modern
control engineering.
FIELDS OF ACTIVITY
TECNO IN S.p.A.
Registered office
Head offices and laboratories :
II Trav. Strettola S. Anna alle Paludi, 11
80142 Napoli
Tel. +39 081/5634520 - fax +39 081/5633970
Viale Parioli, 55/a
00197 Roma
Tel. +39 06/8080362 - fax +39 06/8074672
[email protected] - www.tecnoin.it
Laboratory
chemical – environmental
steel, concrete and cement
soil, rock and bitumen
research
Topography and monitoring
altometric surveys and tests
video prospecting
structural monitoring
environmental monitoring
sub-service research
underwater surveying
On site investigations
structural identification tests
diagnosis and non destructive tests
vibrometry – dynamic analysis
Geology, Geotechnics, Geophysics
geological surveys
on site geological tests
georadar - magnetism
seismic and geoelectricity
archeological surveys
hydrogeology
Techno System (TS) is a fully private company, founded in 1977, specialised in
the design, development and manufacturing of on board and ground
electronic equipment for space applications. TS develops electronic systems,
subsystems and units on a on a custom based “turn key” approach.
Thanks to its technical team composed of highly skilled electronic and space
engineers and by ESA qualified technicians and thanks to state of art facilities
and developing tools TS is fully autonomous in Program management,
System engineering and design, Detailed electronic design, Board
manufacturing and testing Unit, subsystem and system integration and
testing, Qualification and Documentation.
P
R
O
D
U
C
T
S
- On board handling and control unit
- Image processing and compression unit
- Control and data acquisition system for
scientific payloads and instruments
- High resolution digital video systems
- Telemetry and telecommand system
- Electronic ground support equipment
- Battery and power distribution unit
- Actuator driver unit
Data Handling Unit of the
Telescience Support Unit for
the Russian Capsule Foton
(flown on Foton 12 in
September1999)
VIRTIS EGSE
C
O
S
T
U
M
E
R
S
European Space Agency,
Italian Space Agency,
Cira, Ferrari, Alenia,
Swedish Space Corporation,
Dasa, Laben, Officine Galileo,
Mars, Corista, Ansaldo,
Kayser Threde, Centrospazio,
Murst
P
A
R
T
N
E
R
S
SME Space Alliance (SSA)
Italian Association of SME Space Companies (AIPAS)
Inernational Austronautical Federation (IAF)
Antares Consortium
Techno System Developments Srl
Via Provinciale Pianura 35, Loc. San Martino
Pozzuoli (Napoli) – Italy
Tel. 0039-081 52 63 475
Fax 0039-081 52 62 701
E-mail [email protected]
Website www.technosystemdev.com
T e c n o s p a z i o di V. DI FRANCO & C. snc
Industrial area of S. Nicola – 85025 Melfi (Pz) ITALY
Phone 0972.762046 Fax 0972.762088
E-mail [email protected]
Website www.tecnospazio.net
TECNOSPAZIO s.n.c. is a company operating in mechanics sector of high linear and volumetric precision. Placed in
industrial area of S. Nicola of Melfi, adequately structurised, it has 2.800 sq. m covered on a total area of 11.000 sq. m.
Our company is specializising in up to 5 axis products with up to diameter of 1.850 mm and tridimensional impellers in
particular.
PRODUCTIVE CYCLE
PLANNING
Our technical office, equipped with CAD/CAM software of the Unigraphics ( version 16-18NX ), provides to the realization of mathematical models and planning of multicomponential items.
TOOLS PRESETTING
The tools presetting is completely automated thanks to the aid of a machinery Zoller model
Saturn 2, and compared through software with the mathematical model elaborated in the
center of planning
PRODUCTION
Our company uses a park of machineries of last generation.
Workmanship center Dixi 400 5X working in a room with a checked temperature at 20° ± 0,3 .
Workmanship center Jobs Jo’Mach 241.
Workmanship center Mandelli Storm 1400.
Turning mill Carnaghi TG.10/1850/CNC.
Company Profile
M.T. Srl
M.T. Mechanical Technologies srl works with other two SMEs, Alfa Meccanica
srl and Aermec Sud sas, which are some of the most representative among
the supplying companies in the Italian Aerospace field. Our aim is joining the
supplying of both mechanical, hydraulic,
sheet metal groups and a
maintenance service, in order to follow the demands of the big customers,
with an effort in manufacturing and managing innovation, in order to organise
in a vertical system the entire process in a very supplemented and efficient
manner.
This allows to cover the entire production cycle, to offer a reduced “time to
market” and to be highly flexible in the different kind of manufacturing fields,
in order to supply both aeronautical (small-medium lots) and space industry,
(lots made of one or two parts), and to be competitive in tools, moulds and
dies as well. So, the group of companies, which employees almost 60 people
working on a 9000 sqm area, supplies a fully verticalized service, typical of a
big company, applying the typical prices of a SME.
Main Technologies
CAD-CAM Design, High precision Machining, Galvanic
Treatment, Thermal Treatment, Tig Welding, Shot
Peening, Sheet manufacturing, CNC Dimensional
Controls, Non Destructive Controls, Groups assembling
and disassembling, Static and Dynamic tests, Painting.
Designed by Mecaer spa
Manufactured by MT srl
Main Programs
MAGNAGHI Aerospace: Landing Gear and Oil-Pressure
Groups
(G222, C27J, MRCA, F104, A109, A129,MD80, A320,
A300, A319, A321, AMX,ATR42, ATR72, MB339, CH47,
P180, G91)
ALENIA Spazio and Aeronautica: Structural Parts (SicralRadarSat) (MD11, MD80, ATR 42, ATR 72 767, 747, C27J,
G222)
MECAER: Landing Gear and Oil-Pressure Groups
A109LUH (the entire landing gear)
VULCAN AIR: Assembled Groups (P68)
M.T. srl
Via Carceri Vecchie 65, 80046 San Giorgio a Cremano (Napoli) - Italy
Tel. 0039-081 27 04 90 Fax 0039-081 48 12 40
E-mail [email protected]
SOCIETA’ AEROSPAZIALE MEDITERRANEA S.c.r.l.
Tel. – Fax +39 (0)81 2507130
E.mail [email protected]
Website www.samaerospazio.it