Extra Terminal Interface Modules Modules d'interface pour bornes supplémentaires Schnittstellenmodule mit zusätzlichen Anschlußklemmen Moduli di interfaccia con terminali supplementari Módulos de interface con terminal adicional (Cat 1492-IFM20F-2, -RIFM20F-2, -IFM20D24-2, -IFM20D24A-2, -IFM20D120-2, -IFM20D120A-2, -IFM20D240-2, -IFM20D240A-2, -IFM40F-2, -RIFM40F-2, -IFM40D24-2, -IFM40D24A-2, -RIFM40D24A-2, -IFM40D120-2, -IFM40D120A-2, -IFM20FH-2, -RIFM20FH-2, -IFM40FH-2, -RIFM40FH-2) To prevent electrical shock, disconnect from power source before installing or servicing. FM Class 1, Div.2 requires device installation in a tool-accessible enclosure compliant with ANSI/ISA S82. AVERTISSEMENT Avant le montage et la mise en service, couper l'alimentation secteur pour éviter toutes décharges. FM Classe 1, Div. 2 nécessite l'installation de l'équipement dans une armoire accessible aux interventions, conforme à ANSI/ISA S82. Vor Installations- oder Servicearbeiten Strom-versorgung unterbrechen, um Elektroschocks zu vermeiden. FM-Klasse 1, WARNUNG Gruppe 2 erfordert die Installation des Gerätes in einem Gehäuse, das für Werkzeuge zugänglich ist und den Anforderungen gemäß ANSI/ISA S82 entspricht. Per prevenire infortuni, togliere tensione prima dell’installazione o manutenzione. FM Classe 1, Divisione 2 richiede AVVERTENZA l'installazione del dispositivo in un alloggiamento con capacità di accesso per strumenti conforme allo standard ANSI/ISA S82. Desconéctese de la corriente eléctrica, antes de la instalación o del servicio, a fin de impedir sacudidas eléctricas. El ADVERTENCIA requisito de FM (Factory Mutual) Clase 1, Div. 2, establece que el dispositivo debe instalarse en un envolvente que permita la introducción y uso de herramientas y cumpla con la norma ANSI/ISA S82. WARNING Module Identification Area. Identification du module. Modulkennzeichnungsbereich Area per l'identificazione del modulo Area de identificación del módulo. = Connector Pin = Broche de connexion = Steckerstift = Pin del connettore = Pasador de conector 20 (IFM20...) 40 (IFM40...) 2 1 = Field-side Terminals = Borne exterieure = Feldseitiger Terminal = Terminale lato-campo = Terminal de campo 19 (IFM20...) 39 (IFM40...) Status Indicator LEDs. LED indicateurs d'état. Status-LED-Anzeigen. LED indicatori di stato. Indicadores LED de estado. Lower = A Upper = B 1492-EAJ35 35 mm DIN Rail 199-DR1 199-DR4 1492-DR7 B1 A1 1 1 Adhesive Label Card. Provides terminal wiring identification. Carte étiquette adhésive. Identifie le câblage des bornes. Aufklebbare Etiketten zur Kennzeichnung der Klemmenverdrahtung. Scheda etichette adesive. Fornisce l'identificazione del cablaggio dei terminali. Tarjeta de etiquetas adhesivas. Proporciona identificación de cableado del terminal. PN-244748 DIR 40063-258 (Version 22) Printed in U.S.A. 1492-IFM_ Module Installation / Removal Montage / Retrait Installation / Entfernen Montaggio / Smontaggio Instalación / Extracción 1492-RIFM_ Removable Terminal Block Installation / Removal Montage / Retrait Installation / Entfernen Montaggio / Smontaggio Instalación / Extracción 1492-N90 3.5-4.5 lb-in (0.38-0.50 Nm) 2 1 1 0.32 in (8 mm) 2 1492-N90 2 0.32 in (8 mm) 2 W H #22-#12 AWG (0.2-4 mm2) Cu only Cu seulement nur Cu Solo Cu Cu solamente 3.5-4.5 lb-in (0.38-0.50 Nm) PN-244748 DIR 40063-258 (Version 22) (2) #22-#12 AWG (0.2-4 mm2) Cu only Cu seulement nur Cu Solo Cu Cu solamente Cable Matrix Matrice des câbles Kabelmatrix Matrice cavi Matriz de cables 1771-OAD 1771-OBD 1771-OGD 1771-OMD (IN) (OUT) 1771-OND 1764-24AWA 1764-24BWA 1764-28BXB 1764-24AWA 1764-24BWA 1764-28BXB 1492 -IFM20D24A-2 1492 -IFM20D120-2 1492 -IFM20D120A-2 1492 -IFM20D240-2 1492 -IFM20D240A-2 -CABLEA -CABLEB -CABLEB -CABLEE -CABLEB -CABLEA -CABLEB -CABLEB -CABLEB -CABLEB -CABLEC -CABLEE -CABLEE -CABLEE -CABLEE -CABLEE -CABLEE -CABLED -CABLEU 4 -HWCABU -CABLEX 4 -HWCABX -CABLEX 4 -HWCABX -CABLEX 4 -HWCABX -CABLEX 4 -CABLEX 4 -CABLEU 4 -HWCABU -CABLEU 4 -HWCABU -CABLEU 4 -CABLEX 4 -HWCABX -CABLEU 4 -HWCABU -CABLEX 4 -HWCABX -CABLEX 4 -CABLEU 4 -HWCABU -CABLEU 4 -CABA69 4 -CABG69 4 -CABB69 4 -CABB69 4 -CABL69 4 -CABC69 4 -CABE69 4 -CABE69 4 -CABC69 4 -CABM69 4 -CABM69 4 -CABLEF -CABLEF -CABLEF -CABLEF -CABLEF -CABLEF -CABLEF -CABLEFF -CABLEF -CABLEFF -CABLEF -CABLEF -CABLEF -CABLEFF -CABC64 -CABC64 -CABF64 -CABA64 -CABA64 -CABB64 -CABLEA -CABLEB -CABLEA -CABLEB -CABLEB -CABLEB -CABLEB -CABLEC -CABLEC -CABLEE -CABLEE -CABLEE -CABLEE -CABLEE -CABLED -CABLED -CABLED -CABLEU 4 -HWCABU -CABLEX 4 -HWCABX -CABLEX 4 -HWCABX -CABLEX 4 -CABLEX 4 -CABLEX 4 -HWCABX (OUT) 1746-IA16 1746-IB16 1746-IC16 1746-IG16 1746-IH16 1746-IM16 1746-IN16 1746-ITB16 1746-ITV16 1746-IV16 1746-OA16 1746-OB16 1746-OB16E 1746-OBP16 1746-OG16 1746-OV16 1746-OVP16 1746-OW16 1756-IA8D TC-IDX081 1756-IA16 TC-IDA161 1756-IB16 TC-IDD161 1756-IC16 TC-IDE161 1756-IN16 1756-IV16 1756-OA8 TC-ODC081 1756-OA8D TC-ODX081 1756-OA8E 1756-OA16 TC-ODA161 1756-OB8 TC-ODD081 1756-OB16E TC-ODD161 1756-OV16E 1756-OC8 TC-ODE081 1756-ON8 1769-IA16 1769-IM12 1769-IQ16 1769-IQ16F 1769-OB8 1769-OA8 1769-OB16 1769-OV16 1769-OW8 1769-OA16 1769-OW16 1771-IAD 1771-IBD 1771-ICD 1771-IGD 1771-IMD 1771-IND 1492-IFM20F-2 1492 1492-RIFM20F-2 -IFM20D24-2 1492-IFM20FH-2 1492-RIFM20FH-2 -CABLEX 4 -HWCABX -CABLEX 4 (IN) I/O Module Module E/S E/A-Modul Modulo I/O Módulo de E/S -CABA69 4 -CABG69 -CABB69 4 -CABB69 4 -CABE69 -CABE69 4 4 -CABM69 4 -CABM69 4 -CABM69 4 -CABM69 -CABM69 4 4 -CABLEF -CABLEF -CABLEF -CABLEF -CABLEF -CABLEF -CABLEFF -CABLEF -CABLEFF -CABLEF -CABLEFF 4 I/O Module 1492-IFM40F-2 1492 Module E/S 1492-RIFM40F-2 -IFM40D24-2 E/A-Modul 1492-IFM40FH-2 Modulo I/O 1492-RIFM40FH-2 Módulo de E/S 1746-IB32 -CABLEH 1746-IV32 -CABLEH 1746-OB32 -CABLEH -CABLEH 1746-OB32E -CABLEH -CABLEH 1746-OV32 -CABLEH -CABLEH 1756-IB16D -CABLEY 4 TC-IDX161 -HWCABY 1756-IB32 -CABLEZ 4 TC-IDD321 -HWCABZ 1756-IV32 -CABLEZ 4 1756-OB16D -CABLEY 4 TC-ODX161 -HWCABY 1756-IA32 -CABLEZ 4 1756-OB32 -CABLEZ 4 -CABLEZ 4 TC-ODD321 -HWCABZ -HWCABZ 1756-OV32E -CABLEZ 4 1769-IQ32 -CABJ69 4 1769-IQ32T -CABLEH 1769-OB32 -CABK69 4 -CABK69 4 1769-OB32T -CABLEH -CABLEH 1769-OV32T -CABLEH -CABLEH 1771-IAN -CABLEJ 1771-IBN -CABLEJ 1771-IVN -CABLEK 1771-OAN -CABLEL 1771-OBN -CABLEL -CABLEL 1771-OVN -CABLEL -CABLEL 1771-OW16 -CABLER 1771-OWN -CABLEL -CABLEL 1771-OWNA -CABLEL -CABLEL 1762-L40AWA -CABB62 1762-L40BWA -CABB62 1762-L40BXB -CABB62 1762-L40AWA -CABA62 1762-L40BWA -CABA62 1762-L40BXB -CABA62 1794-IB16D -CABB94 1794-IB16XOB16P -CABB94 1794-IB32 -CABB94 1794-OB32P -CABB94 -CABB94 1794-IB16 -CABA94 1794-IB8 -CABA94 1794-IB10XOB6 -CABA94 1794-IV16 -CABA94 1794-OB8 -CABA9 -CABA94 1794-OB8EP -CABA9 -CABA94 -CABA94 1794-OB16 -CABA9 1794-OB16P -CABA9 -CABA94 -CABA94 1794-OV16 -CABA94 1794-OV16P -CABA94 -CABA94 1794-OW8 -CABA94 PowerFlex 700H with 20C-DA1-A Board PowerFlex 700H with 20C-DA1-B Board PowerFlex 700S 1492-CABA7H 1492-CABB7H 1492-CABA7S -CABLEF -CABLEF -CABLEFF Cables are available in 0.5m, 1.0m, 2.5m and 5.0m lengths (005=0.5m, 010=1.0m, 025 = 2.5m, 050=5.0m). Custom length cables also available. Contact local Sales Office for more information. Câbles disponibles en 0,5m, 1,0m, 2,5m et 5,0m de longueur (005=0,5m; 010=1,0m; 025=2,5m; 050=5,0m). Câbles sur mesure à la demande. Contactez le bureau le plus proche. Verfügbare Kabellängen 0,5m, 1,0m, 2,5m und 5,0m (005=0,5m; 010=1,0m; 025=2,5m; 050=5,0m). Anwenderspezifizifische Längen stehen ebenfalls zur Verfügung. Kontaktieren Sie bitte Ihr lokales Vertriebsbüro für weitere Informationen. I cavi sono disponibili in lunghezze di 0,5m, 1,0m, 2,5m e 5,0m (005=0,5m; 010=1,0m; 025=2,5m; 050=5,0m). Sono disponibili anche cavi su misura. Per ulteriori informazioni, contattare l’ufficio vendite locale. Cables disponibles en longitudes de 0,5m, 1,0m, 2,5m, 5,0m (005=0,5m; 010=1,0m; 025=2,5m; 050=5,0m). Hay disponibles cables de varias longitudes. Para más información comuníquese con la oficina de ventas. PN-244748 DIR 40063-258 (Version 22) Supports Removable Terminal Block (RTB) plug. Compatible screw style plug, 1492-RTB20N (pkg. qty. 2). Compatible push-in style plug 1492-RTB20P (pkg. qty. 2). Order plugs separately. Cable is limited for use within the control panel unless it is run through conduit. Cable is ITC (Instrumentation Tray Cable) rated. Cables are also available in 26 AWG versions. 4 Catalog numbers include a 26 at the end. (Example: 1492-CABLEX26) (3) 1492 1492 1492 -IFM40D24A-2 -IFM40D120-2 -IFM40D120A-2 -RIFM40D24A-2 -CABLEH -CABLEH -CABLEZ -HWCABZ -CABLEZ 4 4 -CABLEZ -CABLEZ -CABJ69 -CABLEH 4 4 -CABLEJ -CABLEJ -CABLEK -CABLEL -CABLEL -CABLEL -CABB94 -CABA94 -CABA94 -CABA94 4 Pinout Brochage Anschlußbelegung Disposizione dei piedini Esquema de pins 1492-IFM20F-2 1492-RIFM20F-2 1492-IFM20FH-2 1492-RIFM20FH-2 1 B1 2 B2 3 B3 18 B18 19 B19 B20 20 A1 A11 A2 A12 A9 A19 A10 A20 1492-IFM20D120-2 1492-IFM20D240-2 1492-IFM20D24A-2 1 B1 1 B1 2 B2 2 B2 3 B3 3 B3 10 B10 18 B18 19 B19 20 B20 B11 11 18 B18 19 B19 20 B20 A1 LED Circuit (24V) Circuit du LED LED-Stromkreis Circuito del LED A2 A19 A20 LED Circuit (120/240V) Circuit du LED LED-Stromkreis Circuito del LED A1 A11 A2 A12 A9 A19 1 B1 A10 A20 2 B2 3 B3 10 B10 11 B11 1492-IFM20D24-2 1492-IFM20D120A-2 1492-IFM20D240A-2 1 B1 2 B2 3 B3 18 B18 19 B19 20 B20 10 B18 19 B19 20 B20 A1 A11 A2 A12 A19 A9 A19 A20 A10 A20 A1 LED Circuit (120/240V) Circuit du LED LED-Stromkreis Circuito del LED LED Circuit (24V) Circuit du LED LED-Stromkreis Circuito del LED A2 PN-244748 DIR 40063-258 (Version 22) (4) Pinout Brochage Anschlußbelegung Disposizione dei piedini Esquema de pins 1492-IFM40F-2 1492-RIFM40F-2 1492-IFM40FH-2 1492-RIFM40FH-2 1492-IFM40D24-2 1 3 5 B1 B2 B3 1 3 5 B1 B2 B3 (odd) (odd) B18 B19 B20 35 37 39 19 B10 21 B11 (odd) 2 4 6 (even) 35 37 39 B21 B22 B23 B18 B19 B20 4 B38 B39 B40 36 38 40 A1 A11 A21 A31 A2 A12 A22 A32 A9 A19 A29 A39 A10 A20 A30 A40 1492-RIFM40D24A-2 A2 A12 A9 A19 A10 A20 B21 B22 B23 (even) 4 B1 3 5 (odd) B3 B10 21 B11 (odd) 35 B18 37 B30 20 B2 19 22 B31 (even) 4 B38 B39 B40 36 38 40 B19 B20 39 A1 A11 A2 A12 A9 A19 A10 A20 2 4 B21 6 (even) 4 B23 A21 A31 A22 A32 A29 A39 A30 A40 B22 20 B30 22 B31 LED Circuit Circuit du LED LED-Stromkreis Circuito del LED (even) 4 36 B38 38 B39 B40 40 PN-244748 DIR 40063-258 (Version 22) A11 2 4 6 1492-IFM40D24A-2 1 A1 A21 A31 A22 A32 A29 A39 A30 A40 Odd Impair Ungerade Dispari Impar (5) 4 Even Pair Gerade Pari Par Pinout Brochage Anschlußbelegung Disposizione dei piedini Esquema de pins 1492-IFM40D120-2 1 3 5 1492-IFM40D120A-2 B1 B2 B3 (odd) 1 B1 3 B2 5 B3 (odd) 19 B10 21 B11 19 B10 B18 B19 B20 21 B11 (odd) 35 37 39 A1 A11 A2 A12 A9 A19 A10 A20 2 4 6 (odd) B21 B22 B23 (even) 20 B30 22 B31 35 B18 37 B19 39 B20 A1 A11 A2 A12 A9 A19 A10 A20 2 B21 4 B22 6 B23 (even) (even) 20 B38 B39 B40 36 38 40 22 B30 B31 (even) A21 A22 LED Circuit Circuit du LED LED-Stromkreis Circuito del LED A31 A39 A30 A40 B38 38 B39 40 A32 A29 36 LED Circuit Circuit du LED LED-Stromkreis Circuito del LED Odd NOTICE A31 A22 A32 A29 A39 A30 A40 Even Pair Gerade Pari Par Impair Ungerade Dispari Impar I/O Wiring Data B40 A21 Wiring information for your I/O module, AIFM module and cable (e.g. wiring diagram and pinouts)are available online at www.rockwellautomation.com/en/e-tools. To obtain information follow this procedure. 1) In the Catalog Number BOX at the above online site type in the catalog number of the IFM, AIFM, etc. module you are using and click on Submit. 2) At the next screen displayed, click on the Modify key (lower left of screen). 3) Click on the areas that indicate NO SELECTION and enter your specific configuration information (e.g. I/O platform, I/O MODULE, ETC.). NOTE: To obtain the wiring diagram, you must select th Pre-Wired Cable Connector selection. 4) Configure your 1492 cable by filing in the NO SELECTION areas. 5) Click on the ACCEPT key for the configured 1492 cable. At the next screen click on ACCEPT for the 1492 module. 6) The next screen (Configuration Results) displays the results of your specific configuration. The "supplementary Documents" column contains I/O wiring information for the configuration (e.g. I/O Wiring Diagrams). PN-244748 DIR 40063-258 (Version 22) (6) Specifications Spécifications Catalog No. Référence Bestell-Nr. N. Catalogo Referencia 1492-IFM20FH-2 1492-RIFM20FH-2 Technische Daten Specifiche Voltage Range Tension Spannung Tensione Voltaje Especificaciones Current/Circuit Courant/Circuit Strom/Schaltkreis Corrente/circuito Intensidad/circuito Current/Module Courant/Module Strom/Modul Corrente/modulo Intensidad/módulo 0-132 VAC/DC 0-132 VAC/DC Maximum Recurring Peak Voltage Tension de crele réurrente maximale Maximale periodische Hochstspannung Tensione massima di cresta ricorrente Voltaje de cresta iterativo máximo N/A 2 Amps 1492-IFM40FH-2 1492-RIFM40FH-2 Indicator Circuit Current Courant circuit voyants Strom, Anzeigeschaltkreis Corrente circuito indicatori Intensidad del circuito de indicadores 12 Amps 600 Vp N/A N/A N/A 0-132 VAC/DC 0-132 VAC/DC Ratings when used with 1764-24AWA, and 1764-24BWA outputs. (For inputs use 2 Amps current per circuit.) 1492-IFM20F-2 1492-RIFM20F-2 0-264 VAC 10-125 VDC Out 0 - 3, 2 Amps Out 4 - 11, 1 Amp 600 Vp NA 12 Amps Ratings when used with 1764-28BXB outputs. (For inputs use 2 Amps current per circuit.) 1492-IFM20F-2 1492-RIFM20F-2 0-264 VAC 10-125 VDC 24 VDC Out 0 - 1, 2 Amps Out 8 - 11, 1 Amp Out 2 - 7, 0.5 Amps NA 12 Amps 600 Vp Ratings when used with 1762-L40AWA, and 1762-L40BWA outputs. (For inputs use 2 Amps current per circuit.) 1492-IFM40F-2 1492-RIFM40F-2 0-264 VAC 10-125 VDC Out 0 - 3, 2 Amps Out 4 - 15, 1 Amp 12 Amps NA 600 Vp NA 600 Vp Ratings when used with 1762-L40BXB outputs. (For inputs use 2 Amps current per circuit.) 1492-IFM40F-2 0-264 VAC 10-125 VDC 24 VDC Out 0, 1, 10, 11, 2 Amps Out 12 - 15, 1 Amp Out 2 - 9, 0.5 Amps Operating Temperature Range Plage températures de fonctionnement Betriebstemperaturbereich Limiti temperatura di funzionamento Rango de temperatura de funcionamient Catalog No. Référence Bestell-Nr. N. Catalogo Referencia 1492-IFM20F-2, -RIFM20F-2 1492-IFM20FH-2, -RIFM20FH-2 6 1492-IFM20D24-2 1492-IFM20D24A-2 1492-IFM20D120-2 1492-IFM20D120A-2 1492-IFM20D240-2 1492-IFM20D240A-2 1492-IFM40F-2, -RIFM40F-2 1492-IFM40FH-2, -RIFM40FH-2 6 1492-IFM40D24-2 1492-IFM40D24A-2, -RIFM40D24A-2 1492-IFM40D120-2 1492-IFM40D120A-2 12 Amps Operating Humidity Humidité relative Betriebsluftfeuchtigkeit Umidità di esercizio Humedad operativa Approx. Shipping Weight Poids d'embarquement approximatif Ungefähres Versandgewicht Peso approssimativo del carico Peso aproximado al momento de embarque 0.67 lb. (305 g.) 0° C - 60° C 5 - 95 % 3 1.15 lb. (522 g.) Dimensions Dimensions Abmessungen Dimensioni Dimensiones Width Height 4.33 in. (110mm) 5 3.27 in. (83mm) 4.72 in. (120mm) 2.78 in. (70.5mm) 4.33 in. (110mm) 3.27 in. (83mm) 4.33 in. (110mm) 3.27 in. (83mm) 4.33 in. (110mm) 3.27 in. (83mm) 4.33 in. (110mm) 3.27 in. (83mm) 4.33 in. (110mm) 3.27 in. (83mm) 4.33 in. (110mm) 3.27 in. (83mm) 8.27 in. (210mm) 5 3.27 in. (83mm) 9.05 in. (230mm) 2.78 in. (70.5mm) 8.27 in. (210mm) 3.27 in. (83mm) 8.27 in. (210mm) 5 3.27 in. (83mm) 8.27 in. (210mm) 3.27 in. (83mm) 8.27 in. (210mm) 3.27 in. (83mm) For transients > 600 Vp use a UL recognized suppression device rated at 2.5 kV withstand. Pour des transitoires > 600 Vp utilisez un dispositif de suppression certifié UL à 2,5 kV nominal de tenue. Für Einschaltstöße > 600 Vp verwenden Sie einen UL anerkannten Entstörer, der bewertet wurde bei 2,5 kV standzuhalten. Per transitori > 600 Vp usare dispositivo di soppressione riconosciuto da UL capace di sopportare 2,5 kV. Para transitorios > 600 Vp use un dispositivo de supresión reconocido UL clasificado con 2,5 kV. Power, input and output (I/O) wiring must be in accordance with Class I Division 2 wiring methods - Artticle 501-10(B)(1) of the National Electric Code. WARNING 6 No FM certification for this type of modules. SURGE SUPPRESSION follow the literature recommendations of the PLC module being used. La section SUPPRESSION DES SURTENSIONS se trouve à la suite de la littérature qui contient les recommandations relatives au module PLC utilisé. ÜBERSPANNUNGSSCHUTZ Bitte beachten Sie die Dokumentationsempfehlungen für das jeweils benutzte SPS-Modul. Per la SOPPRESSIONE DEI PICCHI TEMPORANEI, seguire le istruzioni riportate nella documentazione in dotazione al Modulo PLC utilizzato. SUPRESIÓN DE SOBRETENSIÓN, siga las recomendaciones indicadas en la documentación del módulo PLC respectivo. Reference Publications: Refer to 1770-4.1 and appropriate PLC I/O module installation manual. PN-244748 DIR 40063-258 (Version 22) (7) cULus (File: E10314, Guide No. NRAG) Suitable for use in Class 1 Div 2 Groups A, B, C and D Hazardous and Non-Hazardous LocaƟons. 2.78 in. Temperature Code = T3C at 60°C 4 (70.5mm) CE: Compliant for all applicable direcƟves FM Class 1 Div 2 Groups A, B, C and D Temperature RaƟng T3C = 60°C (J.I. 3000590) Non-condensing Sans condensation Nicht kondensierend Senza condensa sin condensación Explosion Hazard - substitution of components may impair suitability for Class I Division 2. Explosion Hazard - Do Not Disconnect Equipment unless power has been switched off or the area is known to be Non-Hazardous. Add 0.39 in. to the width dimension for 1492-Rxx type modules. Depth Standards Normes Standards Standard Estándares PN-244748 DIR 40063-258 (Version 22) Printed in U.S.A.
Scarica
