Raven-X2 104 Rugged 4 Channel Intelligent Video Server The Raven-X2 104 is a compact, 4 channel, intelligent video server employing H.264 or MPEG-4 video compression and advanced video analytics from the leading vendors. As part of a PC/104 Plus stack system, the Raven-X2 104 transforms standard analog video surveillance cameras into proactive sentinels that deliver reliable high performance video streaming and content analysis. This video server is equipped with PTZ control, TTL inputs and relay outputs, has an optional onboard storage Flash disk, and is available in two build configurations, industrial or commercial grade. The Raven-X2 104 can be powered by the Mango IVS software. The Mango IVS software framework enables the seamless integration of third party video analytic software creating a truly intelligent edge device. With its advanced features, the Mango IVS software allows full command and control of video parameters such as resolution, bit rate, frame rate and the video analytics embedded into the server. The integration of third party video content analytics with the Mango software and hardware framework creates a powerful video surveillance solution that reacts to predefined threats and issues alerts accordingly. The integration on both the content analysis and management levels make it ideal for OEM partnerships as part of a full video surveillance system. 1 Raven-X2 104 Rugged 4 Channel Intelligent Video Server Mango DSP IVS Software Features Open Software Architecture for easy integration Mango Multimedia Streaming Engine (MMSE) H.264, MPEG-4 and MJPEG Resolution – 4CIF down to QCIF OSD Engine IP Protection and Onboard Licensing Low Latency 2 Hardware Specification 2 DSP DM642 600/720MHz 4 Analog Video Inputs, 2 Analog Video Out 1 Fast Ethernet for video streaming and board control Onboard Storage - Up to 4GB RS232 & RS422/485 8 TTL Inputs, 4 Relay Outputs Industrial Grade Assembly Option 3 Characteristics Specifications Characteristics Specifications Board Form Factor PC/104 Plus On-Board Relays 4 DPDT Type relays (up to 1Amp @ 30 VDC Load) Processors 2 TI DM642 @ 600/720 MHz 8 TTL Boot Flash Up to 16 MByte per DSP Alarm/Sensor Inputs Optional Storage Flash Up to 4 GByte per DSP Power Requirements +5VDC and +3.3VDC SDRAM Up to 128 MByte per DSP Video Input 4 Composite BNC or 4 S-Video Operating Temperature Commercial : 0ºC - 50ºC (-32ºF to 122ºF) Industrial : -40ºC to 85º (-40ºF to 185ºF) Video Output 2 Composite BNC 2 Stereo or 4 Mono Storage Temperature -40ºC to 85ºC (-40ºF to 185ºF) Audio Input Audio Output 2 Stereo or 4 Mono UART 1 RS232 And 1 RS485/422 per DSP (Simplex or Full duplex) Ethernet Connectors Fast Ethernet RJ-45