Test Method
Standard
Standard ASTM
Acid Number (AN)
Air Release
EN 12634
ASTM D664
DIN ISO 9120
ASTM D3427
DIN ISO 3771
DIN EN 60156
DIN 51551
DIN EN ISO 4264
DIN EN 23015
DIN EN 116
DIN ISO 2049
DIN 51412-2
DIN ISO 7120
DIN EN ISO 12185
DIN EN ISO 12185
DIN EN 60247
DIN EN 60567, DIN EN 60599
IP 396
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
Fe, Cr, Al, B, Ba, Pb, K, Ca, Cu, Mg, Mo, Na, Ni, P, Si, Zn, Sn,
Ag, Ti, V, W, Li, S, Sb, Be, Cd, Co, Mn
DIN 51399-1
ASTM D5185
Ethanol Content (GC)
Ferrography, analytical
Filterability Oils
Flash Point, closed cup
Flash Point, open cup
Flender Foam Test
Foaming Test
OPV* 7.5-74
OPV* 7.5-32
DIN ISO 13357-2
DIN EN ISO 2719, DIN EN ISO 3679
DIN EN ISO 2592
ISO 12152
ASTM
ASTM
ASTM
ASTM
ASTM
at 25°, 50°, 75° or 80°C
Base Number (BN)
Breakdown Voltage
Conradson Carbon Residue
Cetane Index (GC)
Cloudpoint
Cold Filter Plugging Point (CFPP)
Color Scale (ASTM)
Conductivity
Corrosion Protection (steel)
Density
Density Temperature Profile
Dissipation Factor1
Dissolved Gas Analysis (DGA)
Dropping Point
Elements in Oils (ICP)
Four Ball Test
(with expected value) - Oil
Four Ball Test with kit 1
(without expected value) - Oil
Four Ball Test Oil (1 h)
A (150N) / B (300N)
Fuel content
MPC-Test2
Neutralisation Number (NZ)
Particle Count, microscopic
PCT-PCB-Content
Pourpoint
Reserve Alkalinity
RPVOT-Test (oxidation)
RULER (oxidation stability)
TOST-Test wet / dry1,2
Viscosity at 40 and 100°C
incl. viscosity index
Viscosity, dyn. (1 temp.)
Viscosity-Temp.-Profile
Wasser acc. to Karl Fischer
(volumetric)
DIN 51350-2
ASTM D2596
DIN 51350
ASTM D4172
OVP* 7.5-47
DIN 51454
DIN 51453
ASTM D3525
ASTM D3524
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
D7843
D974
D4616
D4059
D97
D1121
D2272
D7590
D943, ASTM D4310
D445
D2270
DIN 53019
DIN 53019
OPV* 7.5-05
OPV* 7.5-41
DIN ISO 6614
Water Separation Properties2
(coulometric)
ASTM D2596
DIN EN ISO 4263
DIN ISO 2909
Visual evaluation
Water by crackle
Water Separation
Wasser acc. to Karl Fischer
D5501
D7690
D7752
D93, ASTM D3278, ASTM D7236
D92
DIN 51350-2
DIN 51558
ISO 4407
DIN EN 12766-2
DIN ISO 3016
OPV* 7.5-
from -30° to +110°C in 10°C-steps
(steam treatment)
ASTM D924
ASTM D3612
ASTM D566, ASTM D2265
ASTM D892
- Sequence I
- Sequence I - III
(demulsibility)
D2896
D3300
D4530
D976
D2500
D6371
D1500
D2624
D665, ASTM D3603, ASTM D5534
D4052
ASTM D1401
DIN 51589
DIN 51777-2
ASTM D6304
DIN EN ISO 12937-B
ASTM D3401
GESTIONE DELLA CONTAMINAZIONE
DI FLUIDI E IMPIANTI
SISTEMI DI FILTRAZIONE
E DEUMIDIFICAZIONE
OilSafe S.r.l.
Via Toscanini, 209
41122 Modena (MO)
ASSISTENZA &
MANUTENZIONE
Pagina 1 di 1
Tel. ++39.059.285294
Fax ++39.059.2860142
Cod. Fisc. e Part. IVA 02589600366
Capitale Sociale € 25.800 I.V.
e-mail: [email protected]
sito web: www.oilsafe.it