ESPULSORI per materie plastiche e pressofusione EDIZIONE 2009 PROJECT INTERNATIONAL S.r.l. – STRADA MOLETO 1 –13048 SANTHIÁ (VC) Tel 0161-931183 Fax 0161-931199 e mail [email protected] INDICE COD. 76175 - Espulsore a testa cilindrica nitrurato (lucido) DIN 1530 PAG. 3 COD. 76115 - Espulsore a testa cilindrica nitrurato (nero) DIN 1530 PAG. 5 COD. 76177 - Espulsore non nitrurato DIN 1530 PAG. 7 COD. 7621 - Espulsore a testa cilindrica DIN 1530 Forma AH PAG. 9 COD. 76145 - Espulsore a testa cilindrica ribassato nitrurato DIN 1530 Forma C PAG. 12 COD. 76141 - Espulsore a testa cilindrica ribassato temprato DIN 1530 Forma CH PAG. 14 COD. 76315 - Espulsore a testa cilindrica lamellare nitrurato DIN 1530 Forma FA (nero) PAG. 16 COD. 76321 - Espulsore tubolare a testa cilindrica lamellare temprato DIN 1530 Forma FAH PAG. 18 COD. 76615 - Espulsore tubolare a testa cilindrica nitrurato DIN 16756 PAG. 20 COD. 76621 - Espulsore tubolare a testa cilindrica temperato DIN 16756 PAG. 22 Pag. 2 Espulsore a testa cilindrica nitrurato DIN 1530 Ejector pin with cilindrical head Cod. 76175 ( lucido/bright ) MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 Resistenza a temperatura min. 600° C Temper resistance at least min. 600° C DUREZZA / HARDNESS GAMBO / SHAFF In superfice: da 950 HV 0,3 On surface: at least 950 HV 0,3 Internamente: 1400 N/mm2 Core strength: approx. 1400 N/mm2 TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Rinvenuti e Nitrurati Head hot forged / Fine round finished and nitrired COD. 76175 ( Lucido / Bright ): Nitrurazione al gas plasma/ gas-plasma nitrided version Pag. 3 Espulsore a testa cilindrica nitrurato DIN 1530 Ejector pin with cilindrical head - Cod. 76175 ( lucido/bright ) Pag. 4 Espulsore a testa cilindrica nitrurato DIN 1530 Ejector pin with cilindrical head Cod. 76115 ( nero/black ) MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 Resistenza a temperatura min. 600° C Temper resistance at least min. 600° C DUREZZA / HARDNESS GAMBO / SHAFF In superfice: da 950 HV 0,3 On surface: at least 950 HV 0,3 Internamente: 1400 N/mm2 Core strength: approx. 1400 N/mm2 OSSIDATI TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Rinvenuti e Nitrurati Head hot forged / Fine round finished and nitrired Pag.5 Espulsore a testa cilindrica nitrurato DIN 1530 Ejector pin with cilindrical head Cod. 76115 ( nero/black ) Pag. 6 Espulsore non nitrurato similare a DIN 1530 Ejector pin unnitrided Cod. 76177 MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 DUREZZA / HARDNESS GAMBO / SHAFF 1400 N/mm2 TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Gambo rettificato Head hot forged / Ground finished shaff Pag. 7 Espulsore non nitrurato similare a DIN 1530 Ejector pin unnitrided Cod. 76177 Pag. 8 Espulsore a testa cilindrica temperato DIN 1530 Forma AH Ejector pin with cylindrical head Cod. 76121 MATERIALE / MATERIAL Acciaio 1.2210, 1.2067 Steel 1.2210, 1.2067 DUREZZA / HARDNESS GAMBO / SHAFF 60 ± 2 HRC TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Gambo cementato / Temprati / Rinvenuti rettificati Head hot forged / Hardened shaft / Tempered / Fine ground finished Pag. 9 Espulsore a testa cilindrica temperato DIN 1530 Forma AH Ejector pin with cylindrical head Cod. 76121 Pag. 10 Espulsore a testa cilindrica temperato DIN 1530 Forma AH Ejector pin with cylindrical head Cod. 76121 Pag. 11 Espulsore a testa cilindrica ribassato nitrurato DIN 1530 Forma C Ejector pin with cylindrical and round stepped shaft Cod. 76145 (lucido/bright – nero/black) Cod.76145 (lucido/bright – nero/black *) MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 Resistenza a temperatura 600° C Temper resistance 600° C DUREZZA / HARDNESS GAMBO / SHAFF 1400 N/mm2 TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Rinvenuti, rettificati e nitrurati Head hot forged / Fine ground finished and nitrided * DISPONIBILE A RICHIESTA: INDICARE IN SEDE D’ORDINE Pag. 12 Espulsore a testa cilindrica ribassato nitrurato DIN 1530 Forma C Ejector pin with cylindrical and round stepped shaft Cod. 76145 (lucido/bright – nero/black) Pag. 13 Espulsore a testa cilindrica ribassato temperato DIN 1530 Forma CH Ejector pin with cylindrical head and round stepped shaft Cod. 76141 MATERIALE / MATERIAL Acciaio 1.2210, 1.2067 Steel 1.2210, 1.2067 DUREZZA / HARDNESS GAMBO / SHAFF 60 ± 2 HRC TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Gambo cementato / Temprati / Rinvenuti rettificati Head hot forged / Hardened shaft / Tempered / Fine ground finished Pag. 14 Espulsore a testa cilindrica ribassato temperato DIN 1530 Forma CH Ejector pin with cylindrical head and round stepped shaft Cod. 76141 Pag. 15 Espulsore a testa cilindrica lamellare nitrurato DIN 1530 Forma FA Ejector pin with cylindrical and rectangular stepped shaff Cod. 76315 (nero/black – lucido/bright) Cod. 76315 (nero/black – lucido/bright *) MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 Resistenza a temperatura min. 600° C Temper resistance at least 600° DUREZZA / HARDNESS GAMBO / SHAFF In superfice/on surface: min.950 HV 0,3 Internamente/core strenght: 1400 N/mm2 TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Rinvenuti, rettificati e nitrurati Head hot forged / Fine ground finished and nitrided *DISPONIBILE A RICHIESTA: INDICARE IN SEDE D’ORDINE Pag. 16 Espulsore a testa cilindrica lamellare nitrurato DIN 1530 Forma FA Ejector pin with cylindrical and rectangular stepped shaff Cod. 76315 (nero/black – lucido/bright) Pag. 17 Espulsore a testa cilindrica lamellare temperato DIN 1530 Forma FAH Ejector pin with cylindrical and rectangular stepped shaff Cod. 76321 MATERIALE / MATERIAL Acciaio a caldo 1.2067 Hot working tool steel 1.2067 Resistenza a temperatura min. 600° C Temper resistance at least 600° DUREZZA / HARDNESS GAMBO / SHAFF 60 ± 2 HRC TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Gambo cementato / Rinvenuti, rettificati e nitrurati Head hot forged / Hardened shaft / Tempered fine ground finished Pag. 18 Espulsore a testa cilindrica lamellare temperato DIN 1530 Forma FAH Ejector pin with cylindrical and rectangular stepped shaff Cod. 76321 Pag. 19 Espulsore tubolare a testa cilindrica nitrurato DIN 16756 Ejector sleeve with cylindrical head Cod. 76615 MATERIALE / MATERIAL Acciaio a caldo 1.2343, 1.2344 Hot working tool steel 1.2343, 1.2344 Resistenza a temperatura min. 600° C Temper resistance at least 600° DUREZZA / HARDNESS GAMBO / SHAFF In superfice/on surface: min.950 HV 0,3 Internamente/core strenght: 1400 N/mm2 TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Rinvenuti, rettificati e nitrurati /Foro guida nitrurato ed affilato Head hot forged / Fine ground finished and nitrided / Guide bore nitrided and honed Pag. 20 Espulsore tubolare a testa cilindrica nitrurato DIN 16756 Ejector sleeve with cylindrical head Cod. 76615 Pag. 21 Espulsore tubolare a testa cilindrica temperato DIN 16756 Ejector sleeve with cylindrical head Cod. 76621 MATERIALE / MATERIAL Acciaio Steel DUREZZA / HARDNESS GAMBO / SHAFF 60 ± 2 HRC TESTA / HEAD 45 ± 5 HRC ESECUZIONE / FINISH Testa forgiata a caldo / Gambo cementato / Temprati / Rinvenuti rettificati Head hot forged / Hardened shaft / Tempered / Fine ground finished Pag. 22 Espulsore tubolare a testa cilindrica temperato DIN 16756 Ejector sleeve with cylindrical head Cod. 76621 Pag. 23 dream-adv.it A8 MILANO Ivrea Biella A4 Santhià A26 Vercelli A5 Novara Project INTERNATIONAL A7 A26 TORINO Asti Pavia A21 A6 Alessandria PROJECT INTERNATIONAL S.r.l. – STRADA MOLETO 1 –13048 SANTHIÁ (VC) Tel 0161-931183 Fax 0161-931199 e mail [email protected]