PROJECT DRILLSHIP“XDS 3600” By ULSTEIN SEA of SOLUTIONS
Project Technical Description
The XDS 3600 drillship is designed to be used for water depths up to 3600 m.
Using the well proven ULSTEIN X-Bow® on the XDS 3600 drillship reduces the vessel motions
and accelerations improving the operational profile. Furthermore it offers the possibility to
“winterize” the design for arctic drilling campaigns.
The drillship is designed to maximize drilling efficiency both of single and dual derrick activities.
In case of adoption of a dual derrick off-line stand building, safe and efficient pipe handling through
a conveyor system, and automated riser handling can be installed with higher operational
employment, thanks to the ULSTEIN X Bow® design.
The drilling package is capable of drilling to depths up to 15,240m (50,000 ft) below rotary table.
The ULSTEIN XDS 3600 drillship has been deeply analysed by Fincantieri Offshore: in particular a
full project feasibility analysis, a project engineering study, a full project estimate, an analysis of the
drilling package configuration have been carried on. This preliminary study allows Fincantieri
Offshore to be able to quote this project to any interested client.
Main Class shall be:
DNV ?1A1 Ship shaped Drilling unit DYNPOS-AUTRO, E0, DRILL, CRANE, HELDK-SH,
BIS, F-AM, OPP-F, COMFORT CLASS V(1)C(1), CLEAN DESIGN (with associated
notations), BWM-EP, GREEN PASSPORT
DRILLSHIP “XDS 3600”
General Specification
Type
ULSTEIN XDS3600 Deepwater Drillship
Design
Ulstein Sea of Solutions
Positioning system
DP3
Transit speed
13 knots
Azimuthing thrusters
3 x 4500 kW
Main generator sets
6 x 5765 kW
Harbour and Emergency Generator
1 x 1500 kW – 1 x 1500 kW
Derrick
•
Derrick Gross Nominal Capacity - Static
1300 mt
Drilling Equipment
Principal Dimension
Mud Pump: 4 x 2200 HP, 7500 psi,
Length overall
213,6
m
Pedestal Crane: 3 x 85 t @ 20m; 1 x 16.5 t @ 30m
Length between perpendiculars
203,1
m
Main and Auxiliary Top Drive
Breadth, moulded
35,0
m
Main Rotary Table: 75½”, 1134 tons capacity
Depth to main deck at side,
moulded
21,0
m
10,0
m
12,0
m
21,0
m
Design draft, operational
(Load Water Line)
Scantling draft, moulded
(scantlings only )
BOP: 18¾”, 15000 psi
Riser for 12000ft. water depth
Riser Tensioning: 3,500,000 lbs
Height to Main Deck (1st Deck)
Operating Depth
Water Depth, DP mode
12.000 ft
Drilling Depth, DP mode
50.000 ft
Accommodation
220 persons
Helideck
Sikorsky S92/S61N and Super Puma
FINCANTIERI OFFSHORE
Andrea PIANTINI
[email protected]
Phone: +39 040 3193931
Mob.: +39 335 6714019
Passeggio Sant’Andrea, 6/A
34123 Trieste (Italy)
[email protected]
Ulstein Sea of Solution
Churchillsingel 432-446
3137 XB Vlaardingen, The Netherlands
Phone : +31 10 4750011
Email : [email protected]
Website : www.seaofsolutions.nl
www.fincantieri.com
Scarica

PROJECT DRILLSHIP“XDS 3600” By ULSTEIN SEA of