Sintesi system
The Sintesi system allows for complete freedom of design composition. The emphasis is on horizontal
linearity through the use of benches, shelves, chests of drawers and cabinets each one with its own
specific use. The large selection of functional and versatile elements provides the ability to adapt to every
style and environment.
Sintesi design Carlo Colombo, 1998
Technical characteristic
Sintesi, a modular system designed for a contemporary living room environment. It allows for unlimited and
original compositions based on freestanding and wall mounted cabinets, low benches, shelves, wall
panels, as well as a sideboard with door and/or drawers.
Finishing:
All the system components are available in 2 wood, walnut c. and wenge. 25 mat lacquered colours and
glossy lacquered colours, 8 colours glossy glass and 8 colours mat glass, reflecting glass blu: the
versatility of sintesi is visible also in the range of finishes available for all the components of the system.
Poliform S.p.A.
Sede legale in Inverigo. Direzione Amministrazione via Montesanto, 28 22044 Inverigo (CO) Italy
tel +39 031 6951 fax +39 031 699444 www.poliform.it [email protected]
Capitale Sociale Euro 10.350.000 int vers REA 129866
Codice Fiscale Partita Iva e Reg.Imprese Como IT00226920130
Sintesi system design Carlo Colombo, 1998
Dimensions:
WIDTHS
600 MM
23 5/8”
900 MM
37 7/16”
1200 MM
47”
1800 MM
70 7/8”
Bench
Depht mm 602 - 23 3/4”
Height mm 123 - 4 7/8”
Chest of drawers
With leaf door, flap door
and drawers
Depht mm 602 - 23 3/4”
Height mm 335 - 13 1/4”
Sideboard
With leaf doors and drawer
complete of small inner drawer
Depht mm 602 - 23 3/4
Height mm 485 - 19 1/8
Hanging chest of drawers
With back panel to the floor
Depht mm 642 - 25 1/4”
Height mm 635/735 - 25”/28 15/16”
Hanging chest of drawers
With drawer
Depht mm 485 - 19 1/8”
Height mm 242 - 9 1/2”
Hanging chest of drawers
With drawer and flap door
Depht mm 485 - 19 1/8”
Height mm 486 - 19 1/8”
Hanging chest of drawers
With leaf doors
Depht mm 485 - 19 1/8”
Height mm 486 - 19 1/8”
Hanging chest of drawers
Complanar sliding doors
Depht mm 485 - 19 1/8”
Height mm 486 - 19 1/8”
With mm 2400 - 94 4/8” as well
Freestanding module and hanging
cabinet
Available with glass and/or wood doors
Depht mm 485 - 19 1/8”
Height mm 635/1235 /1835
25” - 48 5/8” - 72 1/4”
Hanging cabinet with door sliding
in vertical direction
Depht mm 362 - 14 1/4
Height mm 600 - 23 5/8”
Hanging cabinet with flap door
Depht mm 348 - 13 11/16”
Height mm 450 - 17 3/4”
Hanging cabinet with complanar
sliding doors
Available with glass and/or wood
doors
Depht mm 348 - 13 11/16”
Height mm 900 - 35 7/16”
Poliform S.p.A.
Sede legale in Inverigo. Direzione Amministrazione via Montesanto, 28 22044 Inverigo (CO) Italy
tel +39 031 6951 fax +39 031 699444 www.poliform.it [email protected]
Capitale Sociale Euro 10.350.000 int vers REA 129866
Codice Fiscale Partita Iva e Reg.Imprese Como IT00226920130
Scarica

sintesi ing:Layout 1