Argweld®
PurgEye® Family Range of
Weld Purge Monitors®
The PurgEye® 100 IP65 Dustproof and Waterproof Hand Held
© HFT®
IP65 Standard Accredited • Dustproof rated to level 6 (dust tight) • Waterproof to level 5
(protected against water) • A newly developed user replaceable electrochemical sensor • A
sturdy storage case • User calibrate button for both 20.94% and 0.01% levels of oxygen and
below • Quick connect / disconnect ‘leak tight’ purge line connections • New one piece ‘leak
tight’ vacuum brazed stainless steel sampling probe and hose connector • Low battery and
low sensor signals.
The PurgEye® 200, Rechargeable Battery Driven Weld Purge Monitor
© HFT®
© HFT®
Multi-Function power • Electro-mechanical internal pump with 1 l/m flow rate • Accurate readings
from 1000 ppm to 10 ppm • Auto power-off after 15 minutes, automatic sleep mode when not in
use • Rechargeable battery operated • Hand held easy to use instrument • Warning alarm levels
between 1 ppm and 999 ppm • Flow detection for accurate reading of gas samples • Quick
connect / disconnect exhaust gas hose connections
The PurgEye® 300 Weld Purge Monitor® is small, lightweight and inexpensive
Unique, fast response, lifetime sensor measures and indicates down to 10 ppm • Ideal for
welding titanium, nickel alloy, stainless and duplex steels in ultra-clean applications • State
of the art circuitry providing accurate, stable readings (extremely accurate to 10 ppm) special
attention has been paid to electrical shielding to avoid interference • No more wet cells to keep
replacing and re-calibrating • Weld start / stop facility • Internal alarm and security pin code
facilities • Automatic fault-finding diagnostics
The PurgEye® 300 Nano, the World’s ‘first and only’ super low cost, entry level instrument
measuring accurately down to 10 ppm.....!
© HFT®
© HFT®
© HFT®
© HFT®
‘New’ unique lifetime sensor • Less than 60 seconds warm up • Virtually no maintenance • No ‘wet
cell’, no need to constantly calibrate, integrally mounted sensor • Large alpha numeric display
• Small and lightweight • Automatic fault-finding diagnostics
The PurgEye® 500 Weld Purge Monitor® with integral pump
Unique, fast response, lifetime sensor measures accurately and indicates down to 10 ppm •
Internal sampling pump with gas filtration • User port with two outputs to control welding equipment
or activate alarms in the event of rise in oxygen levels • Automatic fault-finding diagnostics •
Internal alarm and security pin code facilities • Weld start / stop facility • No more wet cells to
keep replacing and re-calibrating • Optional PurgeLog™ software for data acquisition to store
and print results and graphs etc. for quality management
The PurgeEye 600® Weld Purge Monitor® is a computerised touch screen model
Full range measurement from atmosphere (20.94%) to 10 ppm using long life sensor
technology • Readings indicates a percentage or in ppm • 3.2" Full colour touch screen with on
screen graph of current weld • Internal sampling pump with gas filtration • Real time clock to
date stamp quality control records • Wireless USB memory stick accessory slot to support data
logging and weld certification
The PurgEye® 1000 Remote Weld Purge Monitor®
Optional 100 m reel of outdoor cable with locking connectors • Reels of extension cable can be
connected together to make longer leads upto 1 km • Shorter or longer lengths can be supplied
to order to suit application • The unit will be powered from the data cable, so only one cable is
required • PurgEye® 1000 Remote comes with a hand held display and a 10 m lead as standard
PurgEye Family FLY 20-11-2014 ME
Huntingdon Fusion Techniques HFT®
Stukeley Meadow BURRY PORT Carms SA16 0BU United Kingdom (UK)
Tel +44 (0) 1554 836 836
Fax +44 (0) 1554 836 837
www.huntingdonfusion.com Email [email protected]
E&OE. Copyright © HFT®.
All rights reserved.
This publication may not be reproduced by any means without the written permission of Huntingdon Fusion Techniques HFT®