VEA Delivery valve diffusers Specification item: Steel ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc. DIMENSIONS AND SELECTION TABLES DIFFUSION SPECIFICATIONS • MATERIAL: steel • COLOUR: RAL 9016 white. • FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms • INSTALLATION HEIGHT: 2.5 - 4 m • USE: suitable for injecting or extracting air into/from small rooms (bathrooms, kitchens); it can also be used as return terminal in medium-large rooms. • EASY INSTALLATION, adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin. • ADJUSTMENT: the air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck TECHNICAL DATA Model ØA ØB ØC 100 150 200 100 160 200 137 212 248 12 12 12 OPERATING DATA Model Cone opening (mm) Flow rate 20 m3/h Flow rate 50 m3/h Flow rate 80 m3/h 100 -6 0 +6 -6 0 +6 -10 0 +10 12 25 45 52 80 100 72 118 162 20 26 45 55 71 122 160 120 180 260 50 45 56 90 105 180 200 140 230 330 80 150 200 Pa TECNICA srl – Via degli Intarsiatori Rolesi 1 – 42047 Rolo (RE) - Italy tel.+39 0522 665129 fax. +39 0522 650211 Web. www.tecnicasrl.it - E-mail: [email protected] ALL RIGHT RESERVED © 2012 Rev. 0 195