SmartLink 2.1
Technical Folder – Smartlink Installation – EN – v1.0
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Regulatory Information
SmartLink 2.1 complies with:
• the 93/42/CEE Directive and with
harmonised standard EN ISO 13485/2012 and
n.0476
further modifications.
• the 60601-1-8:2007 (+ A1:2013 + corrigenda 2010 and 2014) collateral standard,
as part of a Distributed Alarm System (DIS - Distributed Information System, DAS –
Distributed Alarm System, CDAS – Distributed Alarm System with operator
Confirmation).
• the 80001-2-5:2014 technical report, as part of a Distributed Alarm System (DIS Distributed Information System, DAS – Distributed Alarm System, CDAS –
Distributed Alarm System with operator Confirmation).
About this manual
This manual is part of the available SmartLink 2.1 product documentation.
The product documentation is made of these documents:
1) SmartLink 2.1 Declaration of Conformity
2) SmartLink 2.1 User Manual – general
3) SmartLink 2.1 User Manual – Respiration Summary Reports
4) SmartLink 2.1 Installation and Configuration Manual – general
5) SmartLink 2.1 Administration manual – general
6) Smartlink 2.1 Administrator manual
7) SmartLink 2.1 Installation and Configuration Manual - SmartPager
8) SmartLink 2.1 User Manual – SmartPager
9) SmartLink 2.1 SmartPager – Pager Assignment – User
10)SmartLink 2.1 SmartPager - Pager Assignment – Configuration
11) Smartlink 2.1 Update Manual
12) Smartlink 2.1 Configuration Manual
13) Smartlink 2.1 Smartlink Installation
These documents are available in PDF format:
•
On the desktop of the SmartLink 2.1 pre-installed virtual machines
•
Included in the Installer compressed file
•
In the reserved area of the Software Team website.
The documents can be saved on off-line supports and can be printed using Adobe
Acrobat Reader version IX or more recent. In case of use of another PDF reader check
all fonts and graphic parts be correctly displayed.
The documents cannot be disclosed in whole or in part, with any available mean,
outside the organization where SmartLink 2.1 is used and to people different than the
ones directly involved in the SmartLink 2.1 use, configuration, administration,
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
maintenance.
Please take note that one or more of the listed manuals might belong to functions not
included in your supply, even if the whole manuals set is included in the supplied items.
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
DOCUMENT INTENDED PURPOSE AND READERS
This document allows to install a Smartlink 2.1 SE (Standard Edition).
DOCUMENT FIRST ISSUE
Document Name
Version
Date
1.06o SL2.1 – Smartlink Installation
EN-v1.0
2 Dec 2015
Document Name
Version
Date
-----------------------------------------------------------------
--------------- -----------------
DOCUMENT REVISIONS
Pag. 1/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
SMARTLINK 2.1
SMARTLINK INSTALLATION
TABLE OF CONTENTS
1. DOWNLOAD.....................................................................................................3
2. SMARTLINK TOOLS........................................................................................3
3.SMARTLINK SETUP ........................................................................................5
Pag. 2/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
1. DOWNLOAD
Enter to the Software Team web site www.swt.it → techincal area → Smartlink Installation
Download ToolsSmartlink.exe and SmartlinkSetup.exe
2. SMARTLINK TOOLS
First of all, install ToolsSmartlink.exe. Click Next to install Smartlink tools.
Pag. 3/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Enter the password: smartlinkinter
Then click Next and Install.
Pag. 4/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
When the installation is finished click Finish.
3.SMARTLINK SETUP
After tools installation, install Smartlinksetup.exe downloaded from the website.
Click Next in Wizard Setup.
Pag. 5/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Enter the password: smartlinkinter
Then click Next.
Click Next leaving the default settings checked.
Pag. 6/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Click Install Smartlinksetup.exe
Pag. 7/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
If .Net Framework 3.5 is not installed or if it is installed the previous version this screen will appear.
Click download and install this feature and continue the installation.
Then the Mysql screen will appear.
if MySql is already installed, it is asked if mysql has been installed for Smartlink or not:
if not, it is asked to uninstall Mysql.
Pag. 8/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Then, Start to install Mysql. Click Install Mysql Product
Click Accept and the Next
Pag. 9/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Click Execute
select Full Type and then Next
Pag. 10/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Click Execute
Then the Microsoft Visual c++ screen will appear. Click on Accept and the install it
Pag. 11/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Then click Execute
Then click Next
Pag. 12/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
This screen then will appear. Select Server Machine and then click Next
Insert as password mindray
Pag. 13/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Finish the installation and the Click Finish.
Then begin to Install Java.
Click Next.
Pag. 14/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Finish the installation.
When this screen will appear click Next.
Pag. 15/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Finally install Apollo clicking Apollogen
Click Next to install Apollo.
Pag. 16/17
1.06o – SL2.1 – Smartlink Installation
SmartLink 2.1
Technical Folder
Smartlink Installation – EN – v1.0
Finish the installation clicking Finish.
For support contact [email protected] (Software Team srl).
Pag. 17/17
1.06o – SL2.1 – Smartlink Installation