eXPert
Main References
From 2000 to 2013
This document is exclusively property of sdi s.p.a. and may not be reproduced, altered and/or distributed without prior written permission.
eXPert - Main References - Rev. 01
List of revisions
2/86
REV
DATE
EDITOR
01
08/04/2013
Castiglioni
DESCRIPTION
New Document Format – revision index reset
eXPert - Main References - Rev. 01
Index
1.
General information
eXPert product package
4
Distributed Control System (DCS)
4
eXPert DCS Components
SCADA, RTU, telecontrol and remote management systems
2.
3.
4
5
5
eXPert SCADA components
6
Main Sdi typical applications
6
Main applications chronology
8
Year 2013
9
Year 2012
10
Year 2011
11
Year 2010
12
Year 2009
13
Year 2008
14
Year 2007
16
Year 2006
17
Year 2005
19
Year 2004
20
Year 2003
21
Year 2002
22
Year 2001
24
Year 2000
26
Technical data sheets
28
3/86
eXPert - Main References - Rev. 01
1. General information
This document provides a summary of the main references of Sdi in automation and
control system supply.
Hereafter, as a general framework, an introduction to Sdi products and their scope
follows, in order to facilitate the reading of the lists of references and technical data
sheets.
eXPert product package
eXPert is a products suite created by Sdi for the implementation of distributed control
systems (DCS) and systems for the remote control (Telecontrol) and it is the reference
product for all systems designed by Sdi from 2002.
eXPert is the result of the continuous evolution of the PSCS products family (Plant
Supervisory and Control System) whose versions WIN/PSCS 2nd, WINPSCS,
PSCS2000 were commercialized by Sdi since the early nineties.
Distributed Control System (DCS)
eXPert DCS product, designed according to a modular architecture, is purpose-built to
achieve high levels of reliability and security, without losing sight of the flexibility of the
architecture and the customer needs.
Both the electronic subsystems, both the control firmware, are designed to ensure a high
security level. Sdi focuses greatest attention to the selection of component parts with high
reliability, redundant circuitry and diagnostic checks for all those elements and/or
components which are relevant for the purposes of the safety integrity. The redundancy
of the modules and of the communication bus is always provided as a basic functionality
of the system.
A careful audit of the operator actions and a flexible and precise management of the plant
alarms, carried out by the control room operator workstations, enables customers to focus
daily operations on both functional and security aspects.
eXPert DCS manages various type of LAN and WAN connectivity (wired and wireless) in
order to link all system control nodes, all other field equipment and other interconnected
systems, to higher-level systems such as remote control centers or ERP business
systems, in order to convey data where they are better interpretable and usable.
eXPert DCS is a completely scalable and flexible product suitable for various
implementations and easy to adapt to customer needs and requirements both in terms of
system architecture and in terms of I/O size. eXPert DCS can manage up to 255 nodes
connected on the same network, up to 1,000,000 of physical I/O at the same time and is
very easy to expand allowing customers to capitalize the investment made in case of
successive system extensions. In addition to traditional I/O boards, particular attention is
focused on fieldbus interfaces if digital communication is available.
eXPert DCS, as well as performing control and regulation functions, can be equipped with
proper add-on to cover in a fully integrated solution specific requirements in terms of
security (SIL 3, according to IEC 61508 and IEC 61511), fire detection and gas leak
detection (F&G) and fire extinguishing.
4/86
eXPert - Main References - Rev. 01
eXPert DCS Components
The main components of the eXPert DCS system are:
•
Modular control nodes
•
Programmable controllers
•
I/O intelligent interfaces
•
Fieldbus interfaces
•
Communication Interfaces
•
Programmable regulators
•
ESD modules (SIL 3)
•
F&G-Extinguishing modules
•
SOE recorders
•
Flexibles workstations (HMI) and video-wall
•
Engineering workstations
•
Storage stations
•
Asset Management
•
Advanced control and optimization modules
SCADA, RTU, telecontrol and remote management
systems
Sdi proposes its own highly integrated SCADA platform (eXPert SCADA) composed both
by the central system software (Development Tools and Runtime Applications) and by
field devices (RTU/PLC) installed at the focal points of unattended subsystems.
For this purpose the system as a whole has been designed to comply with safety features
"Functional Safety" described in IEC 61508 and IEC 61511; software system has been
developed and is being maintained in accordance with the "V-model".
Both RTU/PLC and central system, have been designed and evolved over time to meet
the most stringent requirements of the market in order to allow Sdi to continue proposing
its own platform in monitoring and control systems for critical infrastructure.
Each single element of the eXPert SCADA platform can be proposed in a redundant
configuration, allowing design of architectures with hot-backup functionalities. The
database system can handle up to 1,000,000 tags and can manage multi-level
hierarchical structures in an integrated way in order to quickly support the creation of
geographically distributed remote control systems.
The human machine interface (eXPert HMI) provided by the system, is highly flexible and
can run at the same time on single local stations (single or multiple monitor) , on remote
stations via WEB or in complex control rooms equipped with video-wall;
eXPert HMI configuration can be easily managed by the provided development tools both
for systems of small/medium size and for larger systems dedicated to critical distribution
infrastructure, managing thousands of animated objects on the displayed synoptics.
eXPert system allows to operate with field devices through different types of
communication network (telephone, LAN, WAN, wired and wireless), in single or
redundant configuration. The diagnosis of connectivity and the potential automatic
activation of backup connections allow the simultaneous use of different types of
connection in order to optimize use and costs of different devices and networks.
5/86
eXPert - Main References - Rev. 01
eXPert SCADA platform is concept and design to guarantee anahih level of scalability
and integrability allowing the system to easy interface third party RTU/PLC; similalrly,
RTU/PLC devices manufactured and supplied by Sdi (using standard communication
protocols of the family IEC IEC 870.5.101 and 870.5.104) can be easy integrated in preexisting systems not necessarily supplied by Sdi.
In case of particularly crital controlled processes (e.g. CNI), Sdi provides natively within
the eXPert SCADA solution, security functions based on DR (Disaster Recovery)
structures, which allow, in case of need, the immediate switch of all control functions, to a
secondary control center, completely equal (or in reduced configuration) to the main one.
eXPert SCADA components
The main eXPert SCADA components are:
•
Single or redundant SCADA server
•
Flexibles workstations (HMI) and video-wall
•
Engineering workstations
•
Storage stations
•
Communication modules to fields peripherals
•
Communication modules to extern systems
•
Wired e wireless communication management modules
•
Disaster Recovery architectures management
•
Telecontrol modular or single-board peripherals (RTU)
•
SCADA “Safety” (according to “V-model” standard IEC 61508 e IEC 61511)
•
Telecontrol “Safety” RTU peripherals
•
I/O intelligent interfaces
•
Fieldbus interfaces
•
SOE recorders
•
Asset Management
•
Optimization modules
Main Sdi typical applications
Sdi, thanks to its R & D laboratories and to the system commissioning department, using
its own hardware and software platforms to implement integrated DCS-ESD-F & G and
SCADA/RTU systems, has always reach the goal of a complete customer satisfaction
both during supply of complete turnkey systems and during supply of single products or
custom solutions to partners VAR (Value Added Reseller).
The experience of Sdi has contributed, through the provision of DCS and SCADA/RTU
systems steadily aligned with the technological requirements of the market, to ensure that
leading Italian companies such as ENEL and ENI Group could have and operate with
outstanding technological solutions.
Starting from first systems developped, in compliance with very strict requirements of
reliability and availability, Sdi formed a solid base of experience and project and
continued over time to evolve its products and its solutions.
Traditional applications are aimed to control and automation in the energy industry, in
particular power production plants (from traditional sources or renewable sources) ,
power distribution grids and networks, high and very high voltage substations, and also in
6/86
eXPert - Main References - Rev. 01
Oil & Gas industry, in particular off-shore extraction facilities and on-shore processing,
transportation and storage facilities.
The changing needs of the modern market have led always more Multi Utility Companies
to look with particular interest at technical solutions proposed by Sdi in order to better
manage and exploit their assets. For these specific customers Sdi provides command
and control systems (either local or remote) to manage power distribution grids and MV /
LV substations, natural gas distribution networks, integrated water cycle and rail transport
systems.
In addition to control systems and remote control, Sdi has gained great experience in the
Oil & Gas technical and fiscal "metering" solutions, for which applications provides
measurement systems, complete skids and EMS systems.
The main applications made by sdi cover the following system functions:
•
Supervision
•
Control
•
Commands
•
Regulation
•
Remote Sensing
•
Alarms
•
DMS Distribution Management System
•
Automation, control and remote control (telecontrl) of electric subsations elettriche
HV/MV
•
MRE power grids monitoring
•
MOD Model On Demand: interactive real time simulation models, even integrated into
the eXPert architecture, aimed to plant design, maintenance, training, and
performance monitoring
•
SOE sequence of events recorders
•
Protection (SEP) ans block (SEB) elaboration.
•
Micro-seismic events monitoring
•
Loads programming
•
Production reporting
•
Leak detection
•
Metering systems (fiscal and technical)
Hereafter are chronologically listed great part of the applications developed by Sdi during
last years and the most significant, identified by the symbol
, are illustrated and
detailed by a summary sheet describing the system and the implemented features.
7/86
eXPert - Main References - Rev. 01
2. Main applications chronology
Hereafter are chronologically listed the most significant applications developped by Sdi
using its own eXPert system.
Application list is ordered by year of implementation.
8/86
eXPert - Main References - Rev. 01
Year 2013
CUSTOMER
SELTA
ENI E&P
SNAM RETE GAS
APPLICATION
PLANT
ASAT2SAS systems for HV substation automation
revamping.
TERNA HV substations of Foggia and
Codrongianos
Integrated GAS measures acquisition system (SIAM):
supply, installation and activation; on call
maintenance service
Italian primary gas distribution network
(Snam Rete Gas)
Wireless analog, digital and serial data acquisition
and data concentrator
GAS treatment plants of Mortara and
Terranuova Bracciolini
*
9/86
eXPert - Main References - Rev. 01
Year 2012
CUSTOMER
PLANT
Local Control System, telecontrol Gateway, Phase
Shift Transformers (PST) automation
Villanova Terna HV Substation, PST
section
HYDROS
Hydro Plant DCS revamping
Brunico Hydro Power Plant
SNAM RETE GAS
Natural gas metering system.
Enna Gas compression station
RTU/ESD/F&G system for ENI Adriatica
Gas Well Colle Sciarra
Supervision system revamping
Castiglione Olona cogeneration plant
Design and production of a new RTU for secondary
gas network minitoring (RID special version))
SNAM secondary gas network
A2A
GAS telecontrol system integration
Canavese and Macconago GAS
distribution network
SNAM RETE GAS
Fiscal metering of natural GAS lines
Enna Gas compression station
DCS revamping
APRICA Waste to Energy Plant
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
2012 system)
Terna HV Substation Molini di Tures
SELTA
ASAT2SAS system: revamping of HV substation
automation system
TERNA HV Substations Marginone and
Ravenna Canala
Grosio PCTC system revamping
Valtellina Hydro power Plants
ALMAVIVA
Data acquisition station (UAS) revamping with a new
CPU board (NTA ) for 210 systems
Trenitalia Railways: Lombardia and
Piemonte
YANMAR
Research project for an Energy management System
(EMS) of a tri-generation plant (CHP)
Aequalis Pontedera (PI)
SELTA
COSMI
MAZZUCCHELLI 1849
SNAM RETE GAS
FRANCO TOSI
A2A
10/86
APPLICATION
*
35
54
eXPert - Main References - Rev. 01
Year 2011
CUSTOMER
APPLICATION
PLANT
*
ENEL GREEN POWER
Telecontrol Center (PT) and remote supervision
Romania Country Control Room (CCR)
(PTS) of photovoltaic and wind power plants Romania - Bucarest
29
ENEL GREEN POWER
Telecontrol Gateway for power production in
photovoltaic and wind power plants
20 plants in Italy and Romania
30
ENI E&P
Telecontrol of Guendalina off-shore platform
Off-shore platform Guendalina
Technical GAS metering lines
Bordolano Gas compression station
Supply of 27 RTU for the pipeline telecontrol system
Gas Pipeline TRANSITGAS (Svizzera)
Supply of UPT boards
A2A Milan Electric network (MV/LV)
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
Terna HV/MV Substations of
CAMPOROSSO (IM), MEDUNO (PN),
AGORDO (BL)
10 Telecontrol systems for photovoltaic production
plants
Plants remote controlled by TERNA in
northern Italy
SNAM RETE GAS
TRANSITGAS
BOFFETTI
SELTA
GAVAZZI
SNAM
Supplyof single loop controlle devicesr
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
2012 system)
Terna HV/MV Substations
PIOSSASCO (TO) and
VILLACASTELLI (BR)
A2A
Telecontrol MV/LV network: supply of RTU pripherals
MV/LV Network Milano
SELTA
DMS system for Electric network MV/LV (managed
by SELNET)
MV/LV Network Alto Adige
ASTEA
DMS system for MV/LV electric network
MV/LV Network Osimo – Recanati
SELTA
ASAT2SAS system prototipe for the revamping of HV
HV Substations TERNA
substation automation
SUDELETTRA
ENEL PRODUZIONE
SELTA
Gas compression station metering system
ENI gas compression station of
Candela
Supervision system(SDS) revamping forpower
generation units TI42 e TI53
Thermoelectric Plant Ettore Majorana
(Termini Imerese)
Local Control System, Telecontrol Gateway, Phase
Shift Transformers (PST) automation
Foggia Terna HV Substation
31
35
35
32
35
11/86
eXPert - Main References - Rev. 01
Year 2010
CUSTOMER
PLANT
EDISON
Hydro Power Plant DCS revamping
Hydro Power Plant of Sonico (BS)
EDISON
Alarm system/RCE
Marghera Azotati (VE)
HV/MV Substation Control System
Steelworks Lucchini (BS)
ACEA
Optimized Regulation system (OxyFuzzy regulation)
for waste water treatment
Waste Water Tratment Plants Ostia
(ACEA Roma)
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
Substation TERNA HV/MV di
GLORENZA(BZ), CARDANO(BZ) e
ITTIRI(SS).
SELTA
Local control system (Station Computer), telecontrol
gateway, small HV/MV substation automation system
(SAS-s compact system)
Prototype for qualification by Terna
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
TERNA HV/MV Substations:i
FADALTO(TV) and
VALMONTONE(ROMA)
PROGETTO SMART GRIDS
NAVICELLI
Networks innovative management based on thermal
and electrical energy storage technologies
Experimental system at NAVICELLI
S.p.A. (PI)
Gas Pipeline Telecontrol Center upgrade and SW
customizations
TRANSITGAS Gas Pipeline (CH)
HP
Editing of test plans for the commissioning of the
Telecontrol Center of the Italian gas primary network
SNAM Rete Gas dispatching center
HP
Frontend system development for data acquisition
from RTU 3G, RTU 2G used in primary gas network
Italia.
SNAM Rete GAS dispatching center
Customizations for prototype validation system of
station computer for HV Terna stations with single
busbar circuit configuration
Prototype for qualification byTERNA
Redundant RTU for interfacing with the network
telecontrol system of TERNA
INNSE MT Substation
APRICA
Waste to energy plant DCS revamping
Bergamo waste to energy plant
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
TERNA HV/MV Substations of SAN
BELLINO (RO) and VILLANOVA(PC)
BOFFETTI
Supply of UPT boards
Electric network MV/LV A2A Milano
HYDROS
Supply of Alarms, Measures ans SOE lists system
Hydro Power Plant Ponte Gardena
NENKI STEEL (GRUPPO
VIENNA)
Redundant RTU for TERNA network management
MT Electric Substation
LUCCHINI
TRANSITGAS
SELTA
INNSE CILINDRI (GRUPPO
RIVA)
12/86
APPLICATION
*
77
35
35
31
35
eXPert - Main References - Rev. 01
Year 2009
CUSTOMER
SNAM Rete GAS
Edison
APPLICATION
Gas compression station DCS (primary gas
distribution network)
PLANT
Gallese Gas Compression Station (VT)
Telecontrol of Off-shore Platform Annamaria B
Off-shore platform Annamaria B
HYDROS
Hydro Power Plant DCS Revamping
Brunico Hydro Power Plant
Edison
33
Feasibility study for gas storage telecontrol system
ENI E&P
Enel Green Power
*
Standardized Telecontrol Gateway prototipe for wind
farms
SOE system
Hydro Power Plant Caffaro 2°
A2A
Hydro Power Plant Telecontrol
A2A Hydro Power Plants in Calabria
A2A
MV/LV Telecontrol network :RTU peripherals supply
MV/LV Network Milano
ENEL
Thermo electric power generation units supervision
system upgrade
Units 3-4 Torre del Sale Power PlantPiombino
ENEL
Thermo electric power generation units automation
and control system
Capraia Isola Power Plant
Gas Pipeline line-pack function
Gas Pipeline Libya
Control System and Supervision (SCS Gallese)
Gas compression station Gallese
TSF
Railway station SCADA and data acquisition devices
for railway traffic control
Rail Network RFI (Italy)
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
TERNA HV/MV Substations of
CIMEGO (TN) and BUSSOLENGO
(VR)
35
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
TERNA HV/MV Substations of
POPULONIA (LI) and COLLARMELE
(AQ)
35
SELTA
Redundant SCADA for TERNA MRE systems
(electric transport network monitoring)
TERNA HV Substations
ENI GREEN STREAM
SNAM RETE GAS
SOMECO
ACEA
34
34
Additional DCS node and Telecontrol and Supervision
ENI Station CROTONE
system extension
Dualisation of public lighting telecontrol system
Public lighting telecontrol system of
Rome
13/86
eXPert - Main References - Rev. 01
Year 2008
CUSTOMER
PLANT
Supervision and control system of turbogas power
FIAT plants
FIAT plants of Acerra
22 skid for gas fiscal ultrasonic metering, and
related centralized management system
7 gas compression and treatment
plants
Potable and waste water network telecontrol system
(Telecontrol centre and RTU Perioherals)
Potable and waste water network
Verona and neighboring municipalities
Gas quality data update monthly service
Snam Compression stations
SELTA
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
Gerbido TERNA HV/MV substation
(GE)
EDISON
Hydro Power Plant DCS
Cividate Hydro Power Plant
Supply of RTU (RID e PIDA) for secondary gas
network monitoring
Secondary gas network of SNAM
Wind farm supervision SCADA
Wind Farm La Miniera (Montecatini val
di Cecina)
Central telecontrol room and telecontrol system
extension for Rome public lighting (Telecontrol
Center and RTU peripherals)
Rome public lighting
Hydro Power Plant SOE lists and alarms
Premesa Hydro Power Plant
Telecontrol network MV/LV: Supply of RTUs (140
devices)
Network MV/LV Milano
Local control system (Station Computer), telecontrol
gateway, HV/MV substation automation system (SAS
system)
TERNA HV/MV Substations: Uvini (CA)
and Rubiera (RE)
Revamping of gas distribution telecontrol system
Milan gas distribution network
Renewal of supervision and control systems of
combined cycle cogeneration power plants
Sulmona and Melfi power plants
Railway station SCADA and data acquisition devices
for railway traffic control
Rail Network RFI
Renewal of Hydro Power Plant DCS
Hydro Power Plant Prati di Vizze
Extension of fiscal metering system Malborghetto
station (UD)
Malborghetto (UD) SNAM gas
compression station
Telecontrol Center SCADA system and SW
customizations
Gas Pipeline TRANSITGAS (CH)
70 RTU IIIG for primary gas network telecontrol
Primary gas network SNAM
COFATHEC
STOGIT
SELTA – Acque Veronesi
SNAM RETE GAS
SNAM RETE GAS
GAVAZZI IMPIANTI
ACEA Electrabel
EDISON
AEM
SELTA
AEM
BG Italia Power
TSF
EDISON
SNAM RETE GAS
SELTA
SNAM RETE GAS
14/86
APPLICATION
*
38
40
36
39
eXPert - Main References - Rev. 01
CUSTOMER
APPLICATION
SIBA
Supply of DCS system with OxyFuzzy optimized
regulation for the Carini (PA) wastewater purification
plant
Carini (PA) wastewater purification
plant
Public lighting telecontrol system maintenance
agreement
Rome public lighting
4 power units (320 MW each) supervision system
maintenance agreement
Piombino ENEL power plant
ACEA Electrabel
ENEL
PLANT
*
37
15/86
eXPert - Main References - Rev. 01
Year 2007
CUSTOMER
PLANT
SNAM RETE GAS
RTU (RID e PIDA)supply agreement for the
secondary gas distribution network Italy
Secondary gas network SNAM
ACEA Electrabel
Public lighting telecontrol system (Telecontrol
Center and RTU Peripherals)
Rome public lighting
Supply of RTU peripherals (140 devices) for the
MV/LV telecontrol network
MV/LV network Milano
AGS Peschiera del Garda
Potable water distribution and waste water SCADA
based Telecontrol system (center and peripherals)
Aqueducts Garda, Peschiera and
neighboring municipalities. Waste
water collector Garda Est
SELTA
Local control system (Station Computer),
telecontrol gateway, HV/MV substation automation
system (SAS system)
TERNA HV/MV substation Lago
Boracifero (Larderello)
RTU for the off-shore platform Benedetta
Off-shore platform Benedetta
N.3 supervision and control systems turbogas
power plants (mono e bi-gruppo) stabilimenti FIAT
Stabilimenti FIAT di Rivalta, Cassino,
Termoli.
AEM
ENI
British Gas Power Italy
EMERSON
Fiscal metering systems per centrali SNAM
CPL Concordia
Fiscal metering system Minerbio gas station
Edison Minerbio gas station
SNAM RETE GAS
Supply of 69 RTU for gas network telecontro
Network nazionale gasdotti SNAM
SELTA
SNAM RETE GAS
Station Computer, Telecontrol Gateway, HV/MV
TERNA HV/MV Pallanzeno
substation automation (SICAS STANDARD system) substation
Supply of a new hystorical data archiving system
for supervision and telecontrol systems (STS)
SELTA
Station Computer, Telecontrol Gateway, HV/MV
TERNA HV/MV Leini substation’
substation automation (SICAS STANDARD system)
COGEME
SELTA
*
56
43
45
58
Supply of 13 single loop controller devices
STOGIT
EDIPOWER
16/86
APPLICATION
Alarms acquision and visualization system,
hardware and software revamping of the
supervision system
Operational centres CREMA and
SERGNANO
San Filippo del Mela Unit:1-2 of the
power plant
SCADA upgrade for waste water collection plant
telecontrol
Redundant SCADA and GATEWAY (MRE) for
HV/MV substations remote monitoring
TERNA HV/MV substations
44
eXPert - Main References - Rev. 01
Year 2006
CUSTOMER
APPLICATION
PLANT
EDISON
Gas Pipeline telecontrol system
Cavarzene – Minerbio gas pipeline
STOGIT
HW/SW maintenance agreement and h24/365
support for SIRIONE Telecontrol system
Crema Operating Center
ENI
FIMIGAS
Supply of 50 VESCOM fiscal metering devices
Candela gas treatment plant
SNAM RETE GAS
52 RTU for the Italian primary gas network telecontrol
Italian national gas network SNAM
Enel Ricerca Pisa
SW development for the thermo electric power plant
simulator
Sulcis Thermo electric power plant
Wastewater purification plant DCS and central
telecontrol room
Wastewater purification plant of
Terrarossa, Orbetello lagoon
Ecoveneta
SELTA
42
HW maintenance agreement and h24/365 support for
UGIT (Italia) Telecontrol system
Supply of n. 3 RTU andTelecontrol Center for gas
treatment station
SUDELETTRA
*
Remote operation telecontrol center (PT) with EMS
Telecontrol centers of TERNI and
functions for ENDESA power production plants in Italy POMEZIA
55
50
46
Gas Pipeline telecontrol system
Tunisian section of the TRANSMED
Gas Pipeline
48
Snamprogetti
3 DCS for the gas compression stations of Sbikha,
Sbeitla and Korba - Gas Pipeline TRANSMED
(Tunisia)
Sbikha,Sbeitla e Korba gas
compression stations
49
EMERSON/Snam Rete Gas
5 management systems of 18 ultrasonic gas fiscal
metering skids
5 Compression stationsSnam
20 ultrasonic gas fiscal metering skids, and its
management system
5 Compression stationsSnam
SW for gas compression management Roseto station
Roseto gas station
ENI SCOGAT
Snam Rete Gas
SO.ME.CO (per ENI E&P)
ENI
Gas treatment control and off-shore
platform telecontrol at Casalborsetti,
SW maintenance agreement and h24/365 support for
Ravenna Mare, Rubicone, Fano,
control system supplied by Sdi (duration: 3-5 years).
Falconara, Spilamberto, Crotone,
Roseto and Pisticci gas stations
TSF
Supervision and Control System railway traffic
(CCL/SCT); Supply of di data acquisition devices
UAS, nano UAS, railway station SCADA, redundant
SCADA and HMI for central control rooms
RFI Railways (Italian Railways)
Public lighting telecontrol system (pilot system)
Rome public lighting
SCADA systems upgrade
Casalborsetti, Ravenna Mare, Fano,
Rubicone gas station and telecontrol
centers
ACEA Electrabel
ENI/UGIT
47
47
17/86
eXPert - Main References - Rev. 01
CUSTOMER
STOGIT
ACSM COMO
18/86
APPLICATION
PLANT
Gas storage Supervision and Telecontrol (STS)
Crema Operating Center
Water/Gas distribution network telecontrol system
Como potable water and gas
distribution networks
*
52
51
eXPert - Main References - Rev. 01
Year 2005
CUSTOMER
APPLICATION
PLANT
Gas Pipeline leak detection and telecontrol system
IGTS – Iranian Gas Transmission
System
MRE system (Electric network monitoring) – 36
SCADA/engineering systems
TERNA HV/MV substations
75 RTU for the telecontrol of the Italian national gas
primary network
National primary gas network SNAM
TSF
Supervision and Control System railway traffic
(CCL/SCT); Supply of 172 data acquisition devices
UAS, 34 nano UAS, 211railway station SCADA, 12
redundant SCADA and HMI for central control rooms.
Linee ferroviarie RFI
AEM
MV/LV network telecontrol
Network MV/LV Milano
Extension of the existing control system (DCS)
supplied by Sdi (third lot)
Purification and treatment of
wastewater from tanneries of the
consortium
EMERSON PROCESS
SELTA
SNAM RETE GAS
CONSORZIO CONCIATORI
FUCECCHIO (FI)
GASPLUS
ENEL
SNAM RETE GAS
AEM
EDISON
Training simulator for circulating fluidized bed plant
Sulcis power plant
Supply of 183 RTU secondary gas network
monitoring (RID e PIDA)
SNAM gas distribution network
Grosio Telecontrol system (supplied by Sdi) –
upgrade of the system and load management system
Telecontrol Center for hydro plants of
Valtellina
Alarm system
Hydro Power Plant Lasa (BZ)
Prototipe of RTU for telecontrol of the primary gas
national network
ENI/UGIT
Telecontrol systems (supplied by Sdi) upgrade and
adaptation of ront end (FEP) for the installation of
new radio connections
45 off-shore platforms and 5 on-shore
stations (Ravenna Mare, Casalborsetti,
Fano, Rubiconde, Falconara)
Alarms, Measures and SOE systems.
Hydro power plants of Battiggio and
Esterle
DCS for Building Automation
ICT center rooms and air conditioning
plants
AGOS ITAFINCO
ENI/UGIT
STOGIT
GREENSTREAM (ENI)
53
55
75
56
Remaking of telemetering system and gas production
data management
SNAM RETE GAS
EDISON
*
60
54
63
Framework contract covering SW maintenance for all
telecontrols system supplied by Sdi
Framework contract covering SW maintenance for
the telecontrol system supplied by Sdi
Crema operating center
Telecontrol Gas Pipeline and maintenance agreement Lybian Gas Transmission System
19/86
eXPert - Main References - Rev. 01
Year 2004
CUSTOMER
PLANT
*
SELTA
DMS system, Telecontrol of the distribution electric
network, network simulator
AGSM Verona MV/LV network and
substations
61
SELTA
Station Computer, Telecontrol Gateway, HV/MV
substation automation (SICAS STANDARD system)
Prototipe system,for certification by
TERNA, of a digital automation system
for HV/MV substations
58
SELTA
DMS and electric network telecontrol system
ASM BRESCIA MV/LV electric network
and substations
64
SELTA
MRE system (electric networks monitoring)
TERNA HV/MV substations; prototipe
for TERNA certification.
59
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 84 data acquisition devices
UAS, 84 railway station SCADA, 4 redundant
SCADA and HMI for central control rooms
Railway lines: Milano-Domodossola,
Rho-Novara-Porto Ceresio, Milano–
Brescia, Milano–Tortona, MilanoChiasso
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 56 data acquisition devices
UAS, 56 railway station SCADA, 3 redundant
SCADA and HMI for central control rooms
Railway lines: Torino-Modane, Nodo
Torino, Torino-Trecate, TorinoAlessandria
75
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 64 data acquisition devices
UAS, 64 railway station SCADA, 2 redundant
SCADA and HMI for central control rooms
Railway lines: Firenze Nodo, Linee
Sicilia
75
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 72 data acquisition devices
UAS, 72 railway station SCADA, 3 redundant
SCADA and HMI for central control rooms
Railway lines: Udine-Monfalcone,
Udine-Cervignano, Mestre, TriesteVenezia
75
ENEL
Loads and production programming system
Boazzo hydro power plant
AVIO
Upgrade of the turbogas control system supplied by
Sdi
Larino (ENEL) turbogas power plant
SNAM RETE GAS
Supply of RTU gas network monitoring (RID e PIDA)
SNAM gas network
MAZZUCCHELLI
Cogeneration power plant – upgrade of the system
supplied by Sdi
Castiglione Olona cogeneration power
plant
Paper mill automation – upgrade of the system
supplied by Sdi
Duino (Trieste) paper mill
Production programming system
Thermo electric power plant S.Filippo
del Mela
EDISON
Load controller and level regulation
Sonico Hydro Power Plant
STOGIT
Telecontrol of gas storage plants from the SIRIONE
center
Brugherio gas storage plant
EDISON
Alarm, Measure and SOE systems
Battiggio and Esterle hydro power
plants
CARTIERE BURGO
EDIPOWER
20/86
APPLICATION
75
69
63
eXPert - Main References - Rev. 01
Year 2003
CUSTOMER
GREENSTREAM (ENI)
ENI/UGIT
STOGIT
APPLICATION
Sistema SCADA e LEAK DETECTION
PLANT
Lybian Gas Transmission System
Ripalta gas storage plant
RTU for platform telecontrol from Ravenna Mare
telecontrol center
Off shore platform TEA (ENI DIV. E&P)
ENEL PRODUZIONE
Distributed cogeneration plants telecontrol system
Cogeneration Plants for clients ENEL
PRODUZIONE
ENEL PRODUZIONE
RICERCA
Design and development of process and regulation
models for the engineering dinamic simulator of
Sulcis power plant
ENI/UGIT
Upgrade of 9 Telecontrol systems for fiscal metering
management
ENEL PRODUZIONE
RICERCA
Development and implementation of process models
and control for ingineering simulator solid waste
treatment (TDS)
ENEL PRODUZIONE
RICERCA
Trining dynamic simulator of the desulfurization plant
for unit 1 of thermo electric power plant of Brindisi
Sud.
DESOX power plant Brindisi Sud
FORES ENGINEERING
RTU for platform telecontrol from Ravenna Mare
telecontrol center
REGINA off shore platform (ENI DIV.
E&P)
CESI
Supervision and control of an experimental hybrid
distributed generation power plant.
Cesi
AEM
Extension of (sdi supplied) Grosio hydro plants
telecontrol system (front end IEC 60870-5-101)
Telecontrol Center for all hydro power
plants in Valtellina (Grosio telecontrol
center)
FIMIGAS
Supply of VESCOM devices for fiscal metering
Va Tech Hydro
Hydro power plant unit automation
Generation unit 3 of Premadio
65 RTU gas network monitoring (RID e PIDA)
Network gas SNAM
ENEL PRODUZIONE
Extension of supervision and control system units 3-4
Piombino power plant
CARTIERA DEL MAGLIO
Revamping of automation and control system (DCS)
Maglio paper mill
TECNOMARE
RTU for the remote control of offshore platform from
the gas treatment plant of Rubicone
Off shore platform NAIDE (ENI DIV.
E&P)
SNAM RETE GAS
62
Framework contract covering SW maintenance for all
telecontrols system supplied by Sdi for the customer
Water re-injection plant telecontrol
FORES ENGINEERING
*
66
67
69
21/86
eXPert - Main References - Rev. 01
Year 2002
CUSTOMER
PLANT
*
Remote control of offshore platform GARIBALDI K
from the gas treatment plant of Casalborsetti
Casalborsetti gas treatment plant
Three-year maintenance contract HW/SW gas
storage plants telecontrol system SIRIONE
Operatind center Crema
SCADA system for gas treatment plant control and
connected offshore platforms telecontrol
Crotone Gas treatment plant
Upgrade and extensionof gas wells telecontrol
system. Supply of 25 RTU
Gas wells, treatment station and
national control centre.
EDIPOWER
Power plant automation control and supervision
system (3 units 20 MW each)
Hydro Power Plant di Ampezzo (UD)
EDIPOWER
Thermoelectric power plant units 160 MW blocks
elaboration system
PCT S.Filippo del Mela (ME) thermo
electric units 1-2 and 3-4
72
EDIPOWER
Supply of DCS cabinet for analog input (STAR)
PCT S.Filippo del Mela (ME) thermo
electric units 1-2 and 3-4
73
ENI DIV. E&P
STOGIT
ENI DIV. E&P
SPI
CESI
RTU for the remote control of offshore platform from
the gas treatment plant of Rubicone
Platform off-shore NAIDE (ENI DIV.
E&P)
SFERA
Interfacing between ABB DCS and operators training
simulation system
SFERA (ENEL group) Piacenza
COSMI
Off-shore platforms automation and telecontrol
system: on site maintenance
Piattaforms of competence of Fano and
Rubicone
EPC (Engineering Procurement Construction) aimed
at making the gas treatment plant remote controlled
Gas treatment plant Spilamberto
Denitrification plant automation
Electricity generation plant from nontoxic waste in Bergamo
Supervision and Control System of railway traffic
(CCL/SCT); supply of data acquisition devices UAS,
local station SCADA, central control rooms SCADA
and HMI
Railway line RIMINI ANCONA
STOGIT
Hystorical process data archiving system (on
ORACLE database) with WEB interface(in Intranet)
Crema operating center
SNAM RETE GAS
114 RTU for gas network monitoring (RID e PIDA)
SNAM gas network
CESI
RAF SIBILO: Advanced diagnostic system for boiler
burners
Tarragona power plant
STOGIT
Extension of SIRIONE system for the telecontrol of
gas storage station of Fiumetreste and Brugherio
Crema operating center
BERGAMO AMBIENTE
SERIZI
TSF
70
71
Relational database (ORACLE) for the management,
via WEB interface, of historical data and forecasts, for Operating center of GRTN (Rome)
the Italian Electric network (loads and generation)
TECNOMARE
ENI DIV. E&P
22/86
APPLICATION
74
75
65
69
eXPert - Main References - Rev. 01
CUSTOMER
SNAM RETE GAS
APPLICATION
50 RTU per monitoraggio network gas (RID e PIDA)
PLANT
Network gas SNAM
*
69
STOGIT
Extension of SIRIONE system for the telecontrol of 8 Gas compression stations and Crema
gas compression stations
operating center
65
EDISON
Automation and telecontrol system of N. 5 power
generation units
Hydro Power Plant of Sonico
77
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 13 data acquisition devices
UAS, 13 railway station SCADA, 1 redundant
SCADA and HMI for central control rooms
Sistema CCL/SCT for the following
railway lines: MILANO-CHIASSO,
BOLOGNA-MILANO-PADOVA,
CANCELLO-SARNO
STOGIT
Extension of SIRIONE system for fiscal metering of
the production of the 8 gas storage stations
Gas storage stations
AEM Milano
Sistema di automazione, regolazione, supervisione
network di distribution GAS
Milan gas distribution network
CONSORZIO CONCIATORI
FUCECCHIO (FI)
Extension of the existing DCS system (provided by
Sdi)
Purification and treatment of
wastewater from tanneries of the
consortium
TSF
111 railway station local SCADA for the Supervision
and Control System of the railway traffic
M42/SCT system for the following
railway lines: ROMA-SULMONA,
BRENNERO, PIEMONTE.
TSF
Supervision and Control System of railway traffic
(CCL/SCT); supply of 10 data acquisition devices
UAS, 10 railway station SCADA, 1redundant SCADA
and HMI for central control rooms.
CCL/SCT system for the following
railway lines: BOLOGNA – RIMINI.
VOITH-RIVA HYDRO
Automation and telecontrol system of N. 1 unit of 105
MW
Grosio Hydro Power Plant
75
76
75
23/86
eXPert - Main References - Rev. 01
Year 2001
CUSTOMER
PLANT
RAF SIBILO: N. 2 SCADA/HMI for boiler advanced
diagnostic functionalities
Thermo electric power plant Brindisi
sud – Enel and Taiwan
BERGAMO AMBIENTE
SERVIZI
Turbogas power plant automation, regulation and
supervision system
Bergamo waste to energy plant
RETE GAS ITALIA (SNAM)
RID e PIDA: new RTU prototipe for gas network
monitoring
Gas network italia
FORES ENGINEERING
RTU for platform telecontrol from Falconara plant
center
Off-shore platform CALIPSO – ENI
DIV. E&P
ENEL PRODUZIONE
RICERCA
Project of an HW-SW system for real time process
diagnostic functions
Combined cycle power plant La Spezia
ENEL PRODUZIONE
RICERCA
µSTAR: Supply of RTU for microturbine systems
Livorno experimental area
ENEL PRODUZIONE
RICERCA
Consulting contract for configuration and test of
automation and operator interface dynamic simulator
Desox
ENI DIV. E&P
Two-year contract for software preventive scheduled
maintenance and system support
Gas production plants and substations
in the operating district of Ravenna
ENEL PRODUZIONE
Automation and control systemdi hydro power plant
Hydro Power Plantdi Boazzo (TN)
ENEL PRODUZIONE
Extension of supervision system for the acquisition of
temperature data of turbo-alternator
Power generation units 3 e 4 della C.le
Termoelettrica di Piombino (LI)
BALANCE SYSTEM
Supervision system for balancing machines
CESI
C.I.S.R
ENI DIV. E&P
TSF S.p.A.
AEM Milano
24/86
APPLICATION
Telecontrol percolate flow
Urbaine waste disposal - Vergiate
New Telecontrol system offshore platforms UNIX
environment
Gas treatment plant of CasalBorsetti
(RA)
43 licences railway SCADA system for the
supervision and control of the railway traffic
Railway Lombardia
Single lamp control
Public lighting Città di Milano
*
78
79
eXPert - Main References - Rev. 01
CUSTOMER
ENI DIV. E&P
FIMIGAS
ENI DIV. E&P
APPLICATION
Telecontrol Platform Cervia K
PLANT
Gas treatment plant Rubicone
Gas treatment plant Fano
N.4 supervision and control systems of n. 4 gruppi
turbo-gas
Thermoelectric power plant of Montalto
(EUROGEN)
Automation, supervision and telecontrol system.
Waste water collector east Garda Lake
APS: Supply of 15 devices for regulation and
elaboration of gas flow and Telecontrol
Telecontrol e tele-metering secondary
gas network SNAM
80 licences railway SCADA system for the
supervision and control of the railway traffic
(CCL/SCT)
Railway Milano - Bologna
ENI DIV. E&P
Supervision system and telecontrol of gas storage
plants of Minerbio and Sabbioncello
Operating district Crema DICR
ENI DIV. E&P
Three-year contract for maintenance of hardware,
supervision and control systems
Gas treatment and off-shore platforms
Ravenna DIRA district
AZIENDA GARDESANA
SERVIZI
FIMIGAS
TSF S.p.A.
80
VESCOM: Supply of n. 90 fiscal volumetric and
Venturi-type gas meters 3C e 3V
SCADA interfacing with DCS MOORE APACS
AVIO
*
25/86
eXPert - Main References - Rev. 01
Year 2000
CUSTOMER
TSF S.p.A.
75 licences railway SCADA system for the
supervision and control of the railway traffic
(CCL/SCT)
PLANT
Railway line Roma – Napoli Battipaglia
ENEL PRODUZIONE
RICERCA
Development of software and models in modeling
environment LEGO and SID
ENEL PRODUZIONE
Power plant DCS: extension of analog and digital I/O
Piombino thermo electric power plant
Supervision system units.1-2
FIMIGAS
APS: Supply of 11 dedicated devices for regulation,
flow calculations and telecontrol
Telecontrol and telemetering secundary
gas network SNAM
ENI DIV. E&P
Maintenance agreement for N. 2 supervision systems
Supervision system gas storage plants
– Crema district
AEM MILANO
Supervision systeme Telecontrol heating production
plants
District heating plants Milano
Automation, supervision and control system
Hydro Power Plant of Calore
Offshore platforms telecontrol system in UNIX
environment
N. 32 Offshore platforms – Gas plant
treatment plant of Falconara (AN)
Alarm system
Turbogas power plant Porto Marghera
CESI
Internet based training simulator for ENEL power
plants
ENEL power plants
ENI DIV. E&P
Software development for onshore-offshore
telephonic network used for the teleontrol system
C.le ENI DIV. E&P di produzione e gas
metano di e CasalBorsetti - ENI DIV.
E&P
RTU for telecontrol functions (Connected to
CasalBorsetti control center)
Platform off-shore NAOMI PANDORA– ENI DIV. E&P
Simulation software development
ENEL power pants simulation
Hardware and software automation and control
system for the whole paper mill
Paper mill Pontecchio Marconi
(Cartiera del Maglio)
µSTAR: 5 RTU for the remote sensing of explosive
atmospheres in isolated wells
ENI DIV. E&P gas production plants of
Falconara and CasalBorsetti - ENI DIV.
E&P
HV substation automation system
Brunico Hydro Power Plant
Sistema di Telecontrol di offshore platforms in
ambiente UNIX
N. 4 Offshore platforms Clara Complex
e Bonaccia - Centrale di trattamento
gas di Falconara (AN) ENI DIV. E&P
AVIO
N.2 supervision and control systems di n. 2 gruppo
turbo-gas
Thermoelectric power plant di Termini
Imerese (ENEL)
FIMIGAS
VESCOM 4 - Supply of.75 gas measuring devices
SNAM gas distribution network
AVIO
Supervision and control systems of n. 4 turbo-gas
units
Thermoelectric power plant of Turbigo
(EUROGEN)
EUROGEN
ENI DIV. E&P
EDISON
MARINO ROSETTI
CESI
CARTIERA DEL MAGLIO
ENI DIV. E&P
EDISON
SAIPEM M. ROSETTI
26/86
APPLICATION
*
eXPert - Main References - Rev. 01
CUSTOMER
CARTIERA DELICARTA
CONSORZIO CONCIATORI
FUCECCHIO (FI)
APPLICATION
Supervision and control system
PLANT
Cogeneration plant Porcari (LU) factory
Purification and treatment of
DCS system for supervision, controllo, telecontrol and
wastewater from tanneries of the
automation
consortium
µSTAR: 17 RTU µSTAR/SAD for micro-seismic
signals recording and 1 RTU for conventional I/O
While-Drilling
SINGLE LOOP: N. 8 regulation systems
Secundary gas distribution network
ENI DIV. E&P
µSTAR: 2 RTU for Telecontrol of monotubolar
Platform Morena
Gas treatment plant Rubicone
TECNOMARE
RTU oerioheral and extension of telecontrol system
of Falconara
Platform off-shore BARBARA T2 – ENI
DIV. E&P
AEM MILANO
Automation and telecontrol system of N. 2 , 75 MW
hydro power plant units
Hydro Power Plantdi Premadio
ERGA GRUPPO ENEL
SNAM
*
Application described in technical data sheet
27/86
eXPert - Main References - Rev. 01
3. Technical data sheets
Following are the brief technical specifications that describe the systems provided
by Sdi summarizing the main features.
They are arranged in reverse chronological order starting from the most recent.
28/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT GATEWAY
ENEL GREEN POWER
WIND FARM AND PV POWER
PLANTS IN ITALY AND ROMANIA
LOCAL MONITORING AND CONTROL SYSTEM UNIFIED GATEWAY FOR WIND AND
PHOTOVOLTAIC POWER PLANTS
SYSTEM ARCHITECTURE
•
•
•
•
•
•
1 SCADA System
1 Local HMI
Gateway (integrated on the SCADA PC) toward the remote control center (PT) and the remote monitoring
center (PTS).
Redundant STAR OHP controller managing the following communication protocols: 61850, 60870-5-104/101,
MODBUS, 62056-25, OPC.
Additional rack for physical I/O boards.
Number of I/O managed, dependent on plant size, from 1000 TAG (for the smallest FV fields) to over 10000
TAG for wind farms with more than 50 wind turbines (WTG).
MAIN FEATURES
Local control and monitoring system for large photovoltaic plants (with average powers greater than 2 MW) and
medium to large wind farms with more than 30 turbines. The systeme acts as local SCADA and HMI and also as
a gateway for remote (PT) and telemonitoring (PTS).
The system is based on the standard of communication and configuration definition IEC 61850 and uses the
communication standard IEC 60870-5-104 for remote control applications, while maintaining a high degree of
flexibility in the choice of additional protocols used in the plant-specific function (devices installed by different
vendors).
PHISICAL I/O (FOR 25 < WTG < 36 )
Digital Input 80
Digital Output 32
Measures 8
Set Point 8
TOTAL I/O
From 1000 to over 10000 TAGS, including points from field communication protocols
29/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT TELECONTROL
ENEL GREEN POWER
WIND FARM AND PV POWER
PLANTS IN ITALY AND ROMANIA
REMOTE CONTROL AND MONITORING OF WIND AND PHOTOVOLTAIC POWER PLANTS
SYSTEM ARCHITECTURE
•
•
•
•
•
•
•
•
•
•
•
Sistem based on double blade server (IBM Blade Center).
1 blade reserved to PT SCADA, PT Front End and Oracle Database on each server.
1 blade reserved to PTS SCADA, PTS Front End on each server.
1 blade reserved to Engineering functions.
1 blade reserved to web server functions
Triple RAID disks on each blade server
4 Workstation for operator double monitor HMI (2 for PT , 2 for PTS)
1 Workstation for Engineering tasks
1 Workstation for 4 monitor Video wall management
Redundant LAN based on managed switches to confine PT and PTS functions
Network components SNMP based diagnostics integrated into the SCADA system
MAIN FEATURES
Remote monitoring and control system for large-scale photovoltaic plants (on average with power greater than 2
MW) and for medium to large wind farms with more than 30 turbines.
The system is divided into the functions of supervision (PTS) and remote (PT). For each function was adopted full
hardware and software redundancy.
Communication with the local plant control systems is achieved through the communication protocol IEC 60870-5104, and includes the connection is with both the local SCADA and RTU.
The system includes the function of remote alarm via GSM to the staff on duty.
I/O DATASET
Digital Input 10000
30/86
Digital Output 2500
Measures 2500
Set Point 4000
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT TELECONTROL
(CENTER AND PERIPHERALS)
TRANSITGAS
TRANSITGAS PIPELINE (CH)
TRANSITGAS PIPELINE TELECONTROL SYSTEM
(REMOTE CONTROL CENTER AND FIELD RTU CONTROLLERS)
SYSTEM ARCHITECTURE
SCADA, Front End 60870-5-104, and Oracle Historian Database for the Telecontrol Center.
2 HMI stations, videowall 3x2 monitor, Engineering workstation
37 redundant NTA RTU, for the monitoring along the pipeline
2 redundant RTU NTA with MODBUS interface toward the measuring systems, for the gas inlet station of Oltingue
(France) and Wallbach (Germany)
1 OHF RTU (mini DCS) in the confluence node of (Rostolf), with regulation of low rates and pressions in the
incoming and outcoming pipelines.
1 RTU NTA for the Ruswil pumping station
MAIN FEATURES
Pipeline monitoring and control system. Regulation of gas flow and pressure at the confluence node of Rostolf,
interfacing with the measure systems located at the input nodes of the two lines from Germany (Wallbch) and
France (Oltingue). 37 monitoring stations along the pipeline. Communication via the IEC 60870-5-104 protocol on
a redundant ring LAN.
I/O DATASET
Digital Input 6000
Digital Output 1024
Measures 1200
Set Point 64
31/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DMS
ASTEA
MV/LV AND GAS NETWORK OSIMO
(AN) AND RECANATI (MC)
DMS AND TELECONTROL SYSTEM FOR GAS AND POWER DISTRIBUTION NETWORKS
SYSTEM ARCHITECTURE
SCADA, Front End, Report and Oracle Database based Historian.
IEC 60870-5-101 e IEC 60870-5-104 protocols
Operator Interface Subsystem composed by n. 2 operator HMI stations with integrated engineering functions.
WEB HMI for the management of remote access via the WEB
Integrated station for transmitting voice alerts to the available staff
Firewall for the confinement of the SCADA system from the corporate network
1 RTU OHP, supplied by sdi, for primary substation (HV / MV) in Via Vici, Osimo
MAIN FEATURES
DMS system, complete with study and simulation station, for the electrical distribution networks of Osimo,
Recanati and Polverigi, for a total of 3 primary stations, 2 satellite stations, 9 Enel exchange stations (HV/LV) and
885 secondary substations.
Integrated generation of reports for the Authority.
SCADA system of natural gas distribution network to Osimo, Recanati, Loreto and Monte Cassino for a total
(initial) 6 REMI cabins.
The system includes remote alarm function available to staff via the telephone network.
I/O DATASET
Digital Input 3000
32/86
Digital Output 1500
Measures 512
Set Point 512
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
SNAM RETE GAS
COMPRESSION STATION
GALLESE (VT)
SUPERVISION AND CONTROL SYSTEM (DCS) COMPRESSION STATION OF NATIONAL GAS
DISTRIBUTION NETWORK
SYSTEM ARCHITECTURE
DCS composed by two control nodes with physical I/O (simple and redundant) and with serial MODBUS RTU
connections toward the 5 compressor units. Integrity control over the command circuit of the solenoid valve.
Process Server in redundant hot backup configuration.
Data Interfacing with the remote control centre.
Time server for time stamp and time synchronization over the LAN, using NTP protocol.
2 control room operator HMI, each with dual monitor
1 mobile operator HMI
1 alarm management HMI
1 operator station dedicated to TC-5 compressor
Interconnection to external remote diagnostic and tax measure for gas volumes systems
MAIN FEATURES
Automation and control of the compression station composed by 5 compression units.
Interfacing to the remote control system, to the remote diagnostics system and to the tax measure system.
I/O DATASET
Digital Input 916+202
redundant+74 with
integrity control
Digital Output 138+214
redundant
Measures 102+ 50
redundant
Set Point 75+9 redundant
33/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
ENEL
POWER PLANT TORRE DEL SALE
PIOMBINO (LI)
SUPERVISION SYSTEM OF CAPRAIA ISOLA THERMAL POWER STATION AND HARDWARE REVAMPING
OFSDS SYSTEM OF PIOMBINO THERMAL POWER STATION
SYSTEM ARCHITECTURE
Piombino thermal power station
Supervision system power units.3-4 integrated with the supervision and control of the power station Capraia Isola,
composed by:
•
Redundant SCADA in hot backup configuration.
•
LAN HMI ethernet dual TCP/IP
•
Ethernet dual Field LAN TCP/IP
•
4 HMI for control room of power units 3-4 operation.
•
2 HMI for station offices operators.
•
1 CONFIG engineering workstation for system parameters configuration.
Capraia Isola thermal power station
•
SCADA single configuration
•
1 STAR/Dual acquisition and control DCS station
MAIN FEATURES
Upgrade of control room and offices HMI stations. Upgrade of SCADA stations, with integration of signal and
measures of the previous supervision and and control system.
Functional integration in the DCS and in the Piombino Power Station of the supervision and control system data
of the Capraia Power Station.
I/O DATASET (Piombino Gr.3-4 + Capraia Isola)
Digital Input 4500+150
34/86
Digital Output 32+16
Measures 2180+150
Set Point 10+10
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA AND GATEWAY
SELTA/TERNA
TERNA ITALIAN POWER GRID
HV/MV SUBSTATIONS
HIGH VOLTAGE SUBSTATION AUTOMATION AND CONTROL (SAS SYSTEM)
SYSTEM ARCHITECTURE
Redundant Station Computer with the following functionalities:
SCADA
Gateway toward TERNA telecontrol centre and toward remote maintenance centre, using RTU with
protocol IEC 61870-5-104
IO Server that uses protocol IEC61850 for the connection of all the bay units (provided by SELTA) of
the substation.
Oracle Database (redundant configuration) providing the following storing functionalities: alarms logs,
events, SOE lists, disturbance recording (COMTRADE format)
Soft PLC IEC 61131 for station level automation sequences (ASAT system)
1 Engineering workstation/HMI and 1 HMI station.
1 system printer, 1 hard copy printer
MAIN FEATURES
High Voltage Substation Automation for 17 TERNA substations for the Italian HV transmission grid. The
substation topology is a double bus-bar topology with two or three Voltage section at 380, 220, 150 or 132 KV.
The substations are of different size that ranges from 10 to 50 bays (mean size is 15 bay).
The system is one of the first complete application of the IEC61850 protocol and system configuration standard.
The IEC 61850 standard is used in LAN communication, connecting to SCADA the SELTA Bay Control Unit
(BCU) e Bay Monitoring Unit (BMU), General Electric and SIEMENS Bay Protection Unit (BPU).
The gateway function provides the connection to remote TERNA telecontrol centers; the protocol used is IEC
61870-5-104. Using the gateway function the station can be completely controlled from the CTI (Telecontrol
Centre) of TERNA.
I/O DATASET
Digital Input from 2500
to 15000
Digital Output from 300
to 1500
Measures from 300 to
1800
35/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
GAVAZZI IMPIANTI
WIND FARM MONTECATINI VAL DI
CECINA
WIND FARM SUPERVISION AND CONTROL
.
SYSTEM ARCHITECTURE
Redundant SCADA providing local data historical archives, local and remote alarming, field data acquisition using
STAR s.d.i. and 6 PLC SIEMENS S7 connected over redundant LAN.
3 HMI remote web connected stations.
2 local HMI stations, one of which provides also engineering functionalities.
1 Web Server for remote connection management
1 STAR device with redundant CPU for the management and control of the MV/HV power station of the wind farm
Single System LAN , redundant fiber optic Field LAN
MAIN FEATURES
Local supervision and control of the wind farm composed by 6 wind turbines Data interface with the automation
PLCs managing the 6 wind turbines; automation and control of the MV/HV power station.
Remote supervision and control provided using web HMI connections, automated telephonic calls to the
personnel in the case of warning/alarm.
I/O DATASET
Digital Input 832
36/86
Digital Output 62
Measures 232
Set Point 24
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
SIBA
WASTEWATER TREATMENT
PLANT OF CARINI (PA)
DISTRIBUTED CONTROL SYSTEM (DCS) FOR THE WASTEWATER TREATMENT PLANT OF CARINI (PA)
WITH OXYFUZZY REGULATION
.
SYSTEM ARCHITECTURE
•
•
•
•
•
•
Redundant SCADA station (Master Station) connected to DCS node over redundant fiber optic LAN.
2 operator stations.
4 DCS nodes with I/O boards for the management of 2 industrial wastewater lines, 2 sewage treatment lines.
4 RTU microSTAR for the remote control of influent sewage (GSM connected)
OxyFuzzy automation of the oxygenation process using an optimization of air pumping algoritm.
Remote connection to the control system and automatic telephone calling to personnel in cases of
alarm/warning (Remote Alarming)
MAIN FEATURES
DCS system that provides Supervision, Automation and Telecontrol of the industrial wastewater and sewage
treatment site in Carini (PA). DCS plant distributed nodes are used for the control of the different stages
constituting the water treatment process. Remote control of influent water is achieved using a GSM connected
RTU A central SCADA is completed with the optimization of oxygenation process is provided using a new
patented algorithm named OxyFuzzy. The functions provided by the system are: data acquisition and commend
sending, operative management of the automation, regulation, protection and interlocking sequences. Analog
measures and alarm limits elaboration with inhibition of command sequences.
I/O DATASET
Digital Input 608
Digital Output 280
Measures 72
Set Point 34
37/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA GATEWAY
STOGIT
7 STOGIT GAS COMPRESSION
AND TREATMENT STATIONS
GAS VOLUME TAX MEASURES SYSTEMS FOR COMPRESSION AND TREATMENT STATIONS
(STOGIT)
SYSTEM ARCHITECTURE
The system is installed in the compression and treatment stations of Ripalta, Sergnano, Settala, Minerbio,
Sabbioncello, Cortemaggiore, Fiume Treste.
In the 7 station are installed a total of 22 ultrasonic measure skid for fuel gas turbine and 31 lines of tax measure
for the consumption of gas boiler of the plant.
For each gas compression station a communication gateway between flow computers and plant DCS is provided.
MAIN FEATURES
Design, supply and installation of the systems of tax measure for gas volumes consumption in compression and
treatment stations; approval of the systems installed (whole measurement chain) by the Ufficio Metrico Italiano
(Italian Metric Authority).
38/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDISON
PREMESA HYDRO POWER PLANT
HYDROELECTRIC PLANT S.O.E, ALARMS AND MEASURES SYSTEM
SYSTEM ARCHITECTURE
The system is composed by:
•
1 eXPert HMI-SCADA station connected to the acquisition and control device (STAR/OHF) and to the
telecontrol remote centre
•
1 STAR/OHF station for plant data acquisition and Seqeunce of Events functionalities (SOE)
MAIN FEATURES
Integrated system for alarm management, analog measures acquisition and SOE list management, related to the
whole hydroelectric power plant.
The system is connected, using a SELTA STCE apparatus, with the Integrated Remote Control System Centre of
EDISON, that allows the remote management of the hydro power plants.
The SCADA-HMI station provides also the system configuration and engineering functionalities.
I/O DATASET
Digital Input 480
Digital Output 0
Measures16
Set Point 16
39/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDISON
HYDRO POWER PLANT CIVIDATE
HYDRO POWER PLANT DCS (DISTRIBUTED CONTROL SYSTEM) AND TELECONTROL
SYSTEM ARCHITECTURE
The system is composed by:
•
2 eXPert HMI stations
•
1 eXPert EWS (Engineering Workstation)
•
Dual SCADA connected to the acquisition and control devices
centre.
•
4 STAR/OHF dual stations for the power generation units (2 stations) for the electric substation (1
station) and for the auxiliary systems (1 station)
(STAR/OHF) and to the telecontrol
MAIN FEATURES
Complete management of the two hydro-power generation units, of the electric substation, and of the auxiliary
services.
Alarms and event management, analog measure acquisition and sequence of events recording for the whole
power plant.
The system is interfaced, using a SELTA-STCE apparatus, with the Integrated Remote Control System Centre of
EDISON, that allows the remote management of the hydro power plant.
The HMI stations and the Engineering Workstation, used for system configuration purposes, are provided.
I/O DATASET
Digital Input1600
40/86
Digital Output 288
Measures312
Set Point 16
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA AND GATEWAY
SELTA/TERNA
TERNA HHV/HV SUBSTATIONS
FOR ITALIAN TRASMISSION
NETWORK
HIGH VOLTAGE HHV/HV SUBSTATION AUTOMATION AND CONTROL WITH INTEGRATED GATEWAY
(SAS)
SYSTEM ARCHITECTURE
Redundant Station Computer providing the following functionalities:
•
SCADA
•
Gateway to TERNA control centers used for remote control and maintenance; protocol used is IEC
61870-5-104
•
IO Server uses standard IEC61850 for data communication within the HV station: connection between
Station Computer and BAY units (Bay Control Units, Bay Monitoring Units and Bay Protection Units).
•
Oracle Database (redundant configuration) for event storage, SOE list, disturbance recording files.
•
Automation and control of operation sequences using IEC 61131 implementation.
•
1 system printer, 1 hard copy printer
1 Engineering workstation and1 HMI workstation
Remote HMI (up to 10 connections).
MAIN FEATURES
High Voltage Substation Automation, Control and Gateway toward tele-control and tele-maintenance for 21
TERNA substations of the Italian national Power Transmission Network. They are double bus-bar topology
substations; with multiple Voltage section at 380, 220 and 132 KV. The total number of bays controlled for the
single substation ranges from 10 to 60 bays; up to 4 transformers in parallel are managed.
The system is a complete application of the IEC61850 protocol and system configuration standard. The IEC
standard is used in LAN communication, connecting to SCADA the SELTA Bay Control Unit (BCU) e Bay
Monitoring Unit (BMU), General Electric and SIEMENS Bay Protection Unit (BPU).
The gateway function provides the connection to remote TERNA telecontrol centers; the protocol used is IEC
61870-5-104. Using the gateway function the station can be completely controlled from the CTI (Telecontrol
Centre) of TERNA.
I/O DATASET
Digital Input from 2500 to
150000
Digital Output from 300
to 1500
Measures from 300 to
1800
41/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
EDISON
CAVARZERE – MINERBIO
METHANE GAS PIPELINE
CAVARZERE-MINERBIO GAS PIPELINE REMOTE CONTROL SYSTEM
SYSTEM ARCHITECTURE
•
•
•
•
•
•
2 SCADA I/O Server stations ( named Master Stations) interconnected by dedicated optical fiber Ethernet
line, in order to build a dual system
3 remote HMI stations
2 OPC servers for the connection with Minerbio’s and Cavarzere fiscal measurement systems (respectively
supplied by s.d.i. and Yokogawa )
15 microSTAR RTUs located along the gas pipeline
Dedicated-line connection between the RTUs and Minerbio’s and Cavarzere’s Master Stations
Backup connection between the RTUs and Minerbio’s and Cavarzere’s Master Station managed via
GSM/GPRS
MAIN FEATURES
Remote control of Minerbio Cavarzere gas pipeline DN 36”-84 Km. The control is effected by 15 acquisition and
control peripheral (microSTAR), connected to the Master Stations via redundant dedicated line with backup line
trough GSM/GPRS connections.
The system manages the remote operator stations respectively located in Milan, Pescara and Ferrara. The two
Master Stations, located in Cavarzere and Minerbio, guarantee the functioning of the system in redundant
configuration with real-time alignment of the databases. Each Master Station is also connected to a local RTU
(STAR QSC), that provides the local station I/O and interfaces to the central DCS.
42/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
AZIENDA GARDESANA SERVIZI
TLC POTABLE WATER
DISTRIBUTION AND WASTE
WATER COLLECTOR
DISTRIBUTED SYSTEM FOR AUTOMATION, SUPERVISION AND TELECONTROL OF POTABLE
WATER DISTRIBUTION AND WASTEWATER COLLECTION OF EASTERN GARDA LAKE
SYSTEM ARCHITECTURE
Redundant SCADA master/slave management with hot backup, external watch dog and arbitration unit (iEWDS).
Operating system Windows-XP.
N. 1 operator workstation (HMI) based on Windows XP, N. 1 engineering workstation used for the whole on line
system configuration and maintenance (eXPert development).
Remote operators connectivity (Web HMI).
N. 2 on-line printers used for journaling logging, reports, hard copy..
N. 90 RTU s.d.i µSTAR for data acquisition and commands to remote sites; connection using telephonic switched
network (PSTN e ISDN) or cellular network (GSM); connection using radio modem or dedicated line to lower
hierarchy RTU.
MAIN FEATURES
Supervision and Telecontrol for water management of Azienda Gardesana Servizi (AGS): the system provides
tele-control functionality for the potable water distribution network (in the district of Garda, Peschiera, Valeggio,
Castelnuovo, Bardolino, Lazise) and for waste water collection in the east side of Garda Lake. Telecontrol devices
(MTU and RTU) are organized in Local Area Networks and are configured with distributed control logic. The
system provides also to automatically send telephone calls, text messages (SMS) and e-mail regarding alarm
signals to maintenance personnel, remote access to the system is allowed using web enabled HMI.
I/O DATASET
Digital Input 2400
Digital Output 1200
Measures 1200
Set Point 300
43/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDIPOWER
TERMOELECTRIC POWER PLANT
S.FILIPPO DEL MELA gr. 1-2
ALARMS, SUPERVISION AND CONTROL SYSTEM FOR POWER GENERATION GROUPS 1-2
SYSTEM ARCHITECTURE
Alarms acquisition and visualization system.
Supervision and control system composed by::
SCADA in redundant configuration with hot backup.
Redundant HMI LAN ethernet TCP/IP
Redundant Field LAN ethernet TCP/IP
4 HMI workstation; 2 dedicated to SdS points visualization 2 for alarms visualization.
1 CONFIG engineering workstation used for system parameters configuration
4+2 STAR Redundant DCS nodes for data acquisition and control
Marshalling cabinets.
MAIN FEATURES
Alarms acquisition and visualization; HMI station and SCADA units for the integration of signals and measures
comng from the supervision and control system.
7 DCS nodes for the supervision and control of generation groups.
Integration of plant’s auxiliary systems via OPC Server and Client.
I/O DATASET
Digital Input 900
44/86
Measures 1000
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
CPL CONCORDIA
EDISON GAS – MINERBIO
MEASUREMENT STATIONS
MINERBIO’S GAS MEASUREMENT STATION PROCESSING AND MANAGEMENT SYSTEM
.
SYSTEM ARCHITECTURE
2 operator stations (HMI) and system printer for the printing of official, control and event list report.
1 redundant SCADA for the interface with all the fiscal measurement and gas quality equipments and respective
processing.
1 OPC server (redundant) for the connection with the remote control system
2 EWDS for serial lines switching toward the flow computer system
Redundant system and field networks
1 eXPert QSC RTU for the acquisition
Field LAN interface to the Flow Computers
RS485 Serial lines interface toward the gas quality meters
MAIN FEATURES
Acquisition, processing and management of data regarding the capacity, volumes and quality of gasses in transit
trough Edison Gas Minerbio measurement station, for fiscal and plant management purposes. Signal acquisition
from flow computers, gas chromatograph, densimeter, dew point meters and valves.
Management of the controls toward the measurement lines valves.
Processing of average and total capacity data, alarms management and creation of official and control reports.
Interface with the remote center.
45/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
SELTA
ENDESA TELECONTROL CENTERS
TELECONTROL AND ENERGY MANAGEMENT (EMS) OF ENDESA POWER PLANTS IN ITALY
SYSTEM ARCHITECTURE:
Telecontrol and Bidding control room (Telecontrol Center of Terni) composed by 2 HMI station and 1 graphic
wall.
Hydro and Wind Power plants control room (Telecontrol Center of Terni) composed by 2 HMI station and 1
graphic wall.
Engineering control room composed by two Engineering Workstation (HMI/Config) respectively related to hydro
and wind plants .
Web server for remote Web HMI.
Redundant SCADA, redundant Front End (I/O Server IEC 60870-5-101protocol), EMS/Historian.
Disaster Recovery system in Pomezia composed by 2 HMI stations, SCADA, EMS/Historian e Front End.
Connections using WAN RTU network, GRTN network, Terna SCTI network.
MAIN FEATURES:
Supervision and remote control of thermal power stations, hydroelectric and wind power plants of ENDESA Italia
(19 hydro, 11 mini-hydro, 5 thermal , 4 wind power plant, reaching a total number of 75 power units managed by
the EMS system). Remote management and regulation of the plants based on production schedules provided by
GSE (Gestore dei Servizi Elettrici).
Implementation of calculation of production cost.
I/O DATASET
Digital Input 10000
46/86
Digital Output 2500
Measures 2500
Set Point 4000
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
EMERSON – SNAM RETE GAS
10 GAS COMPRESSION PLANTS
SNAM RETE GAS
FISCAL MEASUREMENT SYSTEMS OF COMBUSTIBLES GAS VOLUMES FOR SNAM RETE GAS
PLANTS
SYSTEM ARCHITECTURE
The system is provided for 10 gas compression plants: ENNA, MELIZZANO, MESSINA, TARSIA, MONTESANO,
MASERA, ISTRANA, MALBORGHETTO, GALLESE, TERRANOVA
Each system is composed by 2 SCADA stations with measures acquiring features from flow computers, energy
meters and gateways.
The SCADA system is connected to up to 5 flow computers produced by s.d.i. per system (FIMIGAS VESCOM
3C)
Complete supply of the various measurement lines (fuel gas unit, fuel gas heaters, water lines for the heaters).
MAIN FEATURES
Basic and detail planning for the realization of fiscal measurement systems of combustible gas volume in the 5
compression plants; installed systems approval (whole measurement lines) on behalf of the Ufficio Metrico
Italiano.
Procurement for the realization of the fiscal measurement systems, and their mechanical and electro-instrumental
realization.
Interface with :
•
•
•
Station Control System SCS
Informative system to acquire gas quality data from Customer Withdrawal Homogeneous Areas (AOP)
DEC Information System for central exercise data transmission
I/O DATASET
Digital Input 10000
Digital Output 2500
Measures2500
Set Point 4000
47/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
ENI GAS AND POWER - SCOGAT
TRANSTUNISIAN GAS PIPELINE
(TRANSMED)
REMOTE CONTROL OF THE TUNISIAN PART OF TRANSMED GAS PIPELINE
SYSTEM ARCHITECTURE:
Main Remote Control center composed by :
• SCADA I/O Server with dual configuration and hot backup
• Video wall
• 2 operator stations (each one with 3 monitors)
• Web server for remote web HMI
• HDR station for filing data in chronological order
• Engineering workstation
• Telecommunications and system diagnosis operator station (2 monitors)
Remote Control center with disaster recovery feature composed by :
• SCADA I/O Server with single configuration, operator station (3 monitors), telecommunications and system
diagnosis operator station (2 monitors), HDR station for filing data in chronological order, Web server for
remote web HMI
42 iSC RTUs for the acquisition of measures along the gas pipeline and remote control of pumping stations,
connected with the 2 centers by dedicated lines and backup radio link (redundant connection per center)
MAIN FEATURES:
Monitoring and remote control of the gas pipeline that connects Feriana (boundary with Algeria) to Capo Bon
(beginning of TRANSMED’s Mediterranean part) and respective pumping stations. Interface by RTU of 3 DCS
produced by s.d.i. and 2 produced by ABB, in the pumping stations. Communication system on-line diagnosis
I/O DATASET
Digital Input 6384
48/86
Digital Output 1024
Measures 1200
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
SNAMPROGETTI
SBIKHA, SBEITLA E KORBA GAS
COMPRESSION PLANT
AUTOMATION, CONTROL AND MONITORING SYSTEM OF THE 3 COMPRESSION PLANTS OF THE
TRANSTUNISIEN GAS PIPELINE (TRANSMED)
SYSTEM ARCHITECTURE:
3 DCS Systems for the gas compression plants Sbikha, Sbeitla e Korba.
Each system is composed by:
•
3 STAR OHF nodes, each one with redundant CPU and hot backup, redundant LAN connections,
respectively dedicated to common plant management logics (LE1), compressors logics (LE2) and
regulation logics (LR).
•
1 user station (2 monitor)
•
1 user/engineering station (2 monitor)
•
1 portable user station
•
1 I/O Server (Gateway) for the connection with the remote control centers ( the Main one and the
recovery one, both made by s.d.i.)
•
3 printers (events, alarm and Hard Copy)
•
1 interface system to the remote conduction dedicated RTU, composed by a I/O Server with dual
configuration
MAIN FEATURES:
Acquisition and management of the automation, protection and interlock operating sequences. Processing of
analog signals with alarm with the production of threshold alarms or consent to the remote control sequences.
Redundant digital Inputs and integrity check on control relays. Use of LOOP boards for PID adjustments.
Interface to Compressors panels by serial MODBUS. Running of the plant by remote control using the interface
with the remote-operations system (I/O Server and remote control RTUs); on spot running by monitoring stations
(DCS HMI). Chronological report feature with resolution of 5 milliseconds. Remote self-diagnosis feature of the
remote control.
I/O DATASET (for each DCS)
Digital Input 750
Digital Output 200
Measures180
Set Point 26
49/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS e SCADA
ECOVENETA
WASTE WATER NETWORK
ORBETELLO LAGOON
SUPERVISION, AUTOMATION AND TELECONTROL SYSTEM OF COLLECTION AND PURIFICATION
NETWORK IN LAGOON AREA OF ORBETELLO
SYSTEM ARCHITECTURE
Supervision e telecontrol system composed by:
Redundant SCADA station with integrated Historian, Call Center Management e Remote Alarming for telecontrol
of water pumping station (63 telecontrol peripherals RTU) and supervision of the purifier plant DCS.
•
•
•
2 HMI Stations
1 HMI Config Station
remote HMI web connected
Purifier plant DCS system composed by:
•
4 STAR OHF redundant stations connected over dual Ethernet TCP/IP
MAIN FEATURES
Supervision, automation and telecontrol of wastewater collection and treatment of lagoon waters of the
municipalities of Orbetello and Monte Argentario.
Automation and control of the purifier of Terrarossa, carried out by DCS stations (STAR) connected to the central
system via redundant ETHERNET network with TCP / IP.
Remote control of the water pumping station carried out by RTU using the Modbus protocol. Available Personnel
Management and integrated call center via voice alert/call messages to staff available on duty, to report
significant failure or malfunction of equipment, including integrated management of reports of failure, submitted by
citizens.
I/O DATASET
Digital Input 2332
50/86
Digital Output 931
Measures 494
Set Point 43
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
ACSM - COMO
POTABLE WATER AND GAS
DISTRIBUTION
TELECONTROL OF POTABLE WATER AND GAS DISTRIBUTION NETWORK IN THE CITY OF COMO
AND RELATED DISTRICT
SYSTEM ARCHITECTURE
•
•
•
•
•
•
Telecontrol Centre in redundant hot backup configuration
SCADA, I/O Server Historian e 2 HMI station with dual monitor; all functionalities are provided by a redundant
server.
Storage Manager Station providing data storage, elaboration visualization and analysis. The same
workstation provides to all engineering function of the whole system.
68 RTU (30 nanoSTAR, 30 microSTAR, 8 STAR/ISC) connected to the control center using ISDN, PSTN,
dedicated lines and GSM wireless connection.
Management of ISDN lines as backup of dedicated lines
Integration of a MOVICON pre-existent control system (used for the management of the water depuration)
interfaces through MODBUS protocol (3000 data points)
MAIN FEATURES
Supervision and telecontrol of potable water and gas distribution for the Como city and district.
RTU, all produced by s.d.i., are connected to the control centre using different types of lines (ISDN, PSTN,
dedicated) and GSM wireless connections. The protocol used is standard IEC 60870-5-101.
Connection using MODBUS protocol to a pre-existent depuration automation system.
I/O DATASET
Digital Input 750
Digital Output 250
Measures 500
Set Point 30
51/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
STOGIT
GAS STORAGE PLANTS
MONITORING AND REMOTE CONTROL SYSTEM FOR GAS STORAGE PLANTS (STS)
SYSTEM ARCHITECTURE
2 remote control centers in disaster recovery configuration
Operative composed by 16 monitors ( 2 for each remote-controlled plant ), that could be dynamically relocated in
other plants. Dual SCADA and Historian based on Oracle architecture.
8 Front Ends ( FEP ) that acquires data from compression and treatment plants of each site
The composition of each Front End depends on the various type of DCS system in the plants.
MAIN FEATURES
Monitoring and remote control of the 8 storage plants managed by STOGIT. In each site there are a compression
plant and a treatment plant. The Font Ends produced by s.d.i. interface with DCS in the plants via OPC and
MODBUS interface, and/or third parts protocols; each plant is characterized by peculiarities that are solved with
specific interfaces by Front Ends.
Each Front End communicate with both centers (primary and backup for disaster recovery). In each center the
user stations can take control of the remote-controlled sites; dynamic process database is centralized in the
center SCADA system ( everyone in dual configuration), while historical data are stored in the filing station that
lean against an Oracle Server. The communication with the various centers is based on the IEC 60870-5-104
standard.
I/O DATASET
Digital Input 20000
52/86
Digital Output 5000
Measures10000
Set Point 5000
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA AND LEAK
DETECTION
EMERSON PROCESS
IRANIAN GAS PIPELINE AHWAZ
SCADA AND LEAK DETECTION SYSTEM – AHWAZ PLANT
SYSTEM ARCHITECTURE
1 eXPert HMI-SCADA station
6 RTU (µSTAR) installed on the pipeline in LBV stations
Redundant photovoltaic (solar cells) power supply systems for RTUs
Redundant radio modem connection between SCADA and RTUs; the connections are managed using fail over
and load balancing policies.
Serial Modbus connection between SCADA and Emerson DCS.
MAIN FEATURES
Leak detection system monitoring a 95 km long 12” acid gas pipeline. The measurement points are placed in 6
LBV station placed over the pipeline.
System works on-line to identify leak along the pipeline and providing also supervising functionalities.
Leak detection is made by a mathematical model that simulates all plant components and analyses all differences
between measured values and expected values.
This simulator is based on WIN/GIPS (Graphical Interface Process Simulation) real-time mathematical modeling
software and it is integrated into the eXPert suite.
The main functionalities provided are:
• Data acquisition and validation;
• Real time pipeline model;
• Pipeline simulator;
• Pipeline leak detection and localization algorithms;
• Limit values management;
• Operator alarms generation and diagnostic functions.
The system is integrated into the Emerson DCS system installed at Ahwaz; all process variables exchange is
done using Modbus protocol
53/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
AEM S:P:A:
HYDRO POWER PLANTS
VALTELLINA
VALTELLINA HYDRO POWER PLANTS TELECONTRL SYSTEM AND REMOTE GMS/EMS
FUNCTIONALITIES
SYSTEM ARCHITECTURE
Redundant SCADA Server– hot backup master/slave management, Real Time and relational database (Oracle,
for data archiving purposes) time synchronization with external GPS.
4 local HMI workstations, one of them used also as system engineering worstation (HMI/CONFIG), connected
over redundant LAN Ethernet TCP/IP.
2 workstation connected to the corporate network and to the control system, used as generation management
system (GMS) and energy management system (EMS).
1 redundant I/O SERVER for the communication with specific remote operation telecontrol protocols (TIC 1000,
TIC 2, e AS 511).
1 I/O SERVER DUALE for the communication with standard remote operation telecontrol protocols (IEC 60870-5101).
MAIN FEATURES
Remote control and supervision of hydroelectric power plants in Valtellina.
Energy trade, and regulating levels of load distribution of the group of companies (AEM MI / ASM BS / AGSM
VR) using EMS/GMS functionalities.
I/O DATASET
Digital Input 10000
54/86
Digital Output 2048
Measures 1200
Set Point 256
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT RTU 3G
SNAM RETE GAS
NATIONAL GAS DISTRIBUTION
NETWORK
TELECONTROL REMOTE TERMINAL UNIT (RTU) OF THIRD GENERATION FOR THE PRIMARY
NATIONAL SNAM GAS NETWORK
GENERAL SPECIFICATIONS
RTU series STAR iSC rack 19.
Redundant CPU
Redundant power supply
Modular intelligent I/O boards:
•
iTS board: 16 digital input with integrated channels integrity monitoring
•
iTC board: 8 digital output (command) with integrated solid state relays of each channel monitoring
•
iTM board: 8 analog input (measure) with high common mode and normal mode rejection ratio
•
iSER board: 4 serial port for MODBUS connection toward DCS systems and/or field devices
Connection with national dispatching centre SNAM over redundant dedicated lines.
NUMBER OF DEVICES SUPPLIED
Up to now 75 RTU devices in different sites along the national primary distribution network
MAIN FEATURES:
Monitoring and remote management of gas transmission plants in the primary gas distribution network with direct
I/O or data acquisition from local plant DCS.
Data communication to the remote National Dispatching Centre (SNAM)
CONTROLLED POINTS SINGLE RTU (DEFAULT)
Digital Input 32
Digital Output 8
Measures 8
55/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT STAR RTU
AEM
MV/LV DISTRIBUTION NETWORK
TELECONTROL REMOTE TERMINAL UNITS (RTU) FOR THE MV/LV SUBSTATIONS IN MILAN AREA
SYSTEM ARCHITECTURE
2 I/O Server (front end functionalities) for field data acquisition via a bank of ISDN modems from RTU
μSTAR/MBT using IEC 60870-5-101 transmission protocol. The two servers are in redundant decentralized
configuration. Connection, via ethernet LAN (protocol IEC 60870-5-104) with the pre-existing Telegyr STUX-STM
2000 telecontrol system.
700 RTU μSTAR/MBT used for the telecontrol of MV/LV substations of type ENEL (284) and type AEM (416).
The modem, connected via serial RS232C line with RTU, can be of type GSM Dual Band or PSTN. Each device
is power suppied with an energy station, with monitoring and diagnostic funcions of battery charge, at main power
of 230 Vac., The diagnostic informations are collected at RTU level using a serial RS232C connection. A group of
accumulators, 2 or 4 depending on the auxiliary output voltage (24 VDC or 48 VDC) requested in the substation,
is sized to ensure the continuity of operations in case of absence of mains supply (up to 12 hours of operation
with at least 30 operations).
MAIN FEATURES
Remote Control of MV/LV of medium voltage distribution network substations (AEM and Enel) in the
municipalities of Milan and surrounding municipalities. Interfacing with the current telecontrol system via IEC 8705-104 protocol.
I/O DATASET (for each RTU)
Digital Input 64 or 48
56/86
Digital Output16 or 12
Measures 8
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS AND SCADA
AGOS ITAFINCO
CED BERNINA AND LANCETTI
DATA CENTER AUXILIARY SYSTEMS DIAGNOSTICS
SYSTEM ARCHITECTURE
2 STAR OHF redundant DCS nodes, for data acquisition and regulation functions,
2 SCADA - I/O Server workstations for data acquisition, regulation and local HMI functions (Expert STOP/PC
Stations).
2 remote HMI stations
Oni Expert STOP/PC workstations are also present the following functional modules:
•
Expert Remote Alarming for alarm notification using telephone or SMS connection personnel on duty..
•
I/O Server For the communication between SCADA and STAR OHF nodes on Ethernet 10/100 Mbit LAN.
•
HDR modules for the periodic recording of the data in the archive files.. The data thus stored can then be
displayed via the HMI application.
MAIN FEATURES
Two data centers monitoring and alarm management. Is carried out environmental and power diagnostics, to
ensure the proper functioning of the servers hosted in the data centers. Is also monitored the air conditioning
system and intrusion detection. The system is equipped with a telephone call to the available personnel in the
case of alarms detection.
I/O DATASET
Digital Input 2700
Digital Output 32
Measures 170
57/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
SELTA/TERNA
HHV/HV TERNA SUBSTATIONS
TERNA HHV/HV SUBSTATION AUTOMATION AND CONTROL (SICAS STANDARD SYSTEM)
SYSTEM ARCHITECTURE
Redundant Station Computer providing the following functionalities:
•
SCADA
•
Gateway to TERNA control centers used for remote control and maintenance; protocol used is IEC
61870-5-104
•
IO Server uses standard IEC61850 for data communication within the HV station: connection between
Station Computer and BAY units (Bay Control Units, Bay Monitoring Units and Bay Protection Units).
•
Oracle Database (redundant configuration) for event storage, SOE list, disturbance recording files.
•
Automation and control of operation sequences using IEC 61131 implementation.
•
1 system printer, 1 hard copy printer
1 Engineering workstation and1 HMI workstation
Remote HMI (up to 10 connections).
MAIN FEATURES
High Voltage Substation Automation, Control and Gateway toward tele-control and tele-maintenance for 5
TERNA substations of the Italian national Power Transmission Network. They are double bus-bar topology
substations; with multiple Voltage section at 380, 220 and 132 KV. The total number of bays controlled for the
single substation ranges from 10 to 80 bays; up to 4 transformers in parallel are managed.
The system is a complete application of the IEC61850 protocol and system configuration standard. The IEC
standard is used in LAN communication, connecting to SCADA the SELTA Bay Control Unit (BCU) e Bay
Monitoring Unit (BMU), General Electric and SIEMENS Bay Protection Unit (BPU).
The gateway function provides the connection to remote TERNA telecontrol centers; the protocol used is IEC
61870-5-104. Using the gateway function the station can be completely controlled from the CTI (Telecontrol
Centre) of TERNA.
I/O DATASET
Digital Input 120x80
58/86
Digital Output 20x80
Measures 10x80
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
SELTA/TERNA
SOTTOSTAZIONI TERNA HV/MV
HV/MV SUBSTATION MONITORING AND REMOTE CONTROL (MRE)
SYSTEM ARCHITECTURE
Station Computer with thw following functionalities:
• SCADA
• IO Server MMS UCA.2 protocol for tyhe connection with SELTA bay control units (IED)
• 1 HMI/Engineering workstation ed 1 HMI station;
• 1 system printer
MAIN FEATURES
Modular system used da utilizzarsi for alarm visualization, sequence of events, disturbance recording files (DFR)
download and archiving, for HV/MV substation of TERNA.
The system has been installed in more than 50 HV/HHV plants of Terna.
The protocol used is MMS UCA.2; it allows the acquisition from SELTA MU devices (Monitoring Unit). The system
configuration is based on an XMLformatted file, that is automatically imported for the SCADA database definition
and creation. The main function are:
•
•
•
Data and DFR files acquisition from IEDs
Sequence of events acquisition and recording (SOE lists)
Alarms acquisition and elaboration
The system is designed to control large stations (about 80 functional units).
I/O DATASET
Digital Input 120x80
Digital Output 20x80
Measures 10x80
59/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
SIMULAZIONE
ENEL RICERCA
C:LE GRAZIA DELEDDA SULCIS
CIRCULATING FLUIDIZED BED BOILER MODEL FOR THE DINAMIC SIMULATOR OF THE SULCIS
POWER PLANT
SYSTEM ARCHITECTURE
Plant: Circulating Fluidized Bed (CFB) combustion process; boiler with thermal power of 790 MW and 340 MW.
The CFB plant simulator was developed and installed by Enel Ricerca; it was aimed to support the technical
personnel during plant project verification and plant commissioning.
Sdi provided the simulation software (WinGIPS), has collaborated for modeling analysis, specific software
development, and supplied the HMI operator interface .
Simulatore: the dynamic simulator is constituted by a set of sub-models (task) managed by various types of
solvers.
•
process dynamic models and equation, based on the product WinGIPS of Sdi, a network-oriented thermo
fluid dynamics simulation toolkit
•
general purpose dynamic models and control
DATI CARATTERISTICI
Variables num. 200000
60/86
Equation Number 7000
Olver 6 Year/Man Uomo Sdi for the development of
the system
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DMS
SELTA / AGSM VERONA
MV/LV DISTRIBUTION NETWORK
DMS (DISTRIBUTION MANAGEMENT SYSTEM) AND MV/LV SUBSTATIONS TELECONTROL
SYSTEM ARCHITECTURE:
Control room with 3 eXPert HMI stations with 2 monitor; one HMI with additional engineering and configuration
functions
3 additional HMI in offices
1 redundant SCADA
1 redundant I/O Server
1 SIMULATOR station
Redundant system network
Multiple modems and switches for the management of communication lines toward RTUs
MAIN FEATURES:
The system provides, besides the ordinary telecontrol, SCADA and HMI functions, also distribution management
system (DMS) functionalities, for the MV/LV energy distribution system of Verona.
The DMS system manages all topological network information, calculates the actual network status, considering
all data acquired from RTU and/or coming from operators input, and individuates the network point of failure.
The DMS system is completed by two integrated software packages:
the RIRE software (electric network interruptions recording) that allows to log the interruptions and to calculate the
quality of service of the electric distribution network.
the simulator that allows the simulation of the network behavior starting from previously recorded network
statuses (snap-shots) and allows the testing and verify of operating sequences.
Interruption logging is used also in connection with the simulator station allowing the creation of simulated
scenarios that are useful for study and documentation purposes. The system manages a whole of 2400 MV/LV
stations.
I/O DATASET
Digital Input 12000
Digital Output 9000
Measures 0
Set Point 0
61/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA AND
SIMULATION
GREENSTREAM ENI GROUP
LGTS LIBYAN GAS TRANSMISSION
SYSTEM
SCADA AND PIPELINE LEAK DETECTION SYSTEM – GREENSTREAM PLANT
DUAL FRONT-END SYSTEM
SICILY
GPS
SOCRATE
METERING
SYSTEM
ECIS
DCS
SYSTEM
S
S
LAN ETHERNET
S
EWDS
EWDS
RS232
M
M
RS232
RS232
M
MODEM
SERIAL LINES - 19.200 BAUDS - MODBUS RTU PROTOCOL
MODEM
Pubblic switched
Telephon lines
DANIELS
METERING
SYSTEM
NUOVO PIGNONE
ABB DCS
SYSTEM
S
LDS SYSTEM
ENG. W/S
21" CRT
21" CRT
NOT IN SUPPLY
OPERATOR STATION
DUAL SCADA SYSTEM
21" CRT
GPS
21" CRT
MODEM
MODEM
PRINTER
SERVER
S
LAN ETHERNET
EWDS
RS485
M
RS232
M
LIBYA
SERIAL LINES - 19.200 BAUDS - MODBUS RTU PROTOCOL
NEW LGTS SCADA & LD SYSTEM LAYOUT
SYSTEM ARCHITECTURE
2 eXPert HMI-SCADA station (hot-backup), 1 engineering workstation ed 1 leak detection station installed at the
Libyan pipeline end-position (Mellitah);
1 RTU sited in Gela in order to connect local DCS and handle communications with Libyan terminal
MAIN FEATURES
Gas (average 8 BSCMY Billion Standard Cubic Meter per Year) extracted in Libya is redirected toward Italy
through a pipeline about 550Km long which runs on the bottom of the sea at a maximum depth of 1.160 meters; a
compression station is located in Mellitah (Lybian coast), gas is pumped into national Italian network in Gela
(Italian coast). The only measurement points are located on the coasts.
System works on-line to identify leak along the pipeline and providing also supervising functionalities.
Leak detection is made by a mathematical model that simulates all plant components and analyses all differences
between measured values and expected values.
This simulator is based on WIN/GIPS (Graphical Interface Process Simulation) real-time mathematical modeling
software and it is integrated into the eXPert suite.
The system is integrated into the DCS architecture installed at Mellitah and Gela supervising stations; it receives
via Modbus protocol all process variables.
62/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDISON
HYDRO POWER PLANTS OF
BATTIGGIO AND ESTERLE
HYDRO POWER PLANT ALARMS, MEASURES AND SOE LISTS SYSTEM
SYSTEM ARCHITECTURE
For each hydroelectric power plant the system is composed by:
1 eXPert HMI-SCADA workstation connected to the DCS acquisition and control nodes (STAR/OHF) and to the
remote tecontrol system via SELTA STCE telecontrol device.
3 DCS nodes STAR/OHF dedicated to acquisition and SOE functionalities.
MAIN FEATURES
For each of the 2 hydroelectric power plant an integrated alarm, analog measures and sequence of events (SOE)
system was provided.
The system is also interfaced, via a SELTA STCE telecontrol device, to the integrated Supervisione and
Telecontrol system of Edison, that allows the remote management of hydro power plants from the Operations
Center of Bolzano.
The HMI-SCADA station, has also engineering workstation functionalities.
I/O DATASET BATTIGGIO
Digital Input 810
Digital Output 0
Measures 76
Set Point 0
Digital Output 0
Measures120
Set Point 0
I/O DATASET ESTERLE
Digital Input 1100
63/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA/DMS
SELTA /ASM BRESCIA
MV/LV DISTRIBUTION NETWORK
DMS (DISTRIBUTION MANAGEMENT SYSTEM) E TELECONTROL OF MV/LV SUBSTATIONS
SYSTEM ARCHITECTURE
4 eXPert HMI station, one of them with engineering functionalities (CONFIG); 10 remote HMI (wireless connected
using GSM) for maintenance and support personnel.
1 redundant SCADA station
1 redundant I/O Server and multiple modems and switches used for communication lines management toward
RTUs
1 Simulation station interfaced to an Historian station with specific functionalities of network asset snap shots
memorization.
MAIN FEATURES
The system provides, besides the ordinary telecontrol, SCADA and HMI functions, also distribution management
system (DMS) functionalities. The controlled MV/LV energy distribution network covers Brescia and the Salò
valley. The DMS system manages all topological network information, calculates the actual network status,
considering all data acquired from RTU and/or coming from operators input, and individuates the network point of
failure.
The DMS system is completed by two integrated software packages:
the RIRE software (electric network interruptions recording) that allows to log the interruptions and to calculate the
quality of service of the electric distribution network.
the simulator that allows the simulation of the network behavior starting from previously recorded network
statuses (snap-shots) and allows the testing and verify of operating sequences.
The system manages 2400 MV/LV substations (600 of which remote controlled) situated along the Salò Valley
and 1500 MV/LV substations (187 of which remote controlled) in Brescia. Are also managed the connected
HV/MV substations, and in Salò Valley, the whole HV network. Are controlled totally 20 HV substations.
The complete management of the network status required a local database (additional in respect to acquired
data) of 66000 calculated digital points, 8000 analog points,17000 strings and 3000 structured data points.
I/O DATASET
Digital Input 15700
64/86
Digital Output 9900
Measures 250
Set Point 50
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT/RTAP HP-UX
STOGIT
GAS STORAGE PLANTS STOGIT
REMOTE CONTROL OF UNDERGROUND GAS STORAGE PLANTS
SYSTEM ARCHITECTURE
4 SCADA RTAP stations in redundant configuration with 9 Front End elements (hot-backup)
1 Front End station in redundant configuration (MODBUS) to connect compression gas station
16 HMI stations (connected with SCADA in a modularity of 4)
2 Engineering Workstation
1 storage station on relational db (ORACLE) with a WEB interface used to have an Intranet access
4 networks composed by RTUs ( s.d.i. STAR) used to handle signals, measures, commands and set-points at
the compression stations; 3 networks are composed by 3 devices, the fourth is composed by 6 devices.
MAIN FEATURES
Remote control of underground gas storage plants located in Sergnano, Ripalta, Settala, Cortemaggiore,
Fiumetreste, Brugherio, Minerbio, Sabbioncello and corresponding compression stations.
I/O DATASET
In this plant are remotely controlled about 80000 signals.
65/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
SIMULAZIONE
ENEL
C.LE BRINDISI SUD
DYNAMIC TRAINING SIMULATOR FOR DESOLFORATION PLANT OF UNIT 1 OF THERMOELECTRIC
POWER PLANT OF BRINDISI SUD
SYSTEM ARCHITECTURE
PLANT: flue gas desulfurization process of a coal-fired thermoelectric power plant.
The fumes are treated in two absorption columns with a spray suspension of limestone. The sulfur absorbed,
once precipitated with calcium in the form of gypsum, is extracted from the absorber reaction tank and treated to
be sold.
Hardware platform simulator: workstation Compaq ES 40 with OSF1 UNIX operating system
Simulation Software: simulation environment run-time alterLego, able to accommodate task process and
regulation implemented with solvers WinGIPS and Legocad.
MAIN FEATURES
Introduction in the simulation environment WinGIPS of Sdi of the treatment of physical and chemical phenomena
such as evaporation, absorption, dissolution, precipitation, dust collection, irreversible and reversible reactions
with finite kinetic and equilibrium.
Study and implementation in simulation environment WinGIPS of:
mathematical models of innovative components of the system such as: reaction column and tank pre-absorber
and absorber main hydrocyclones, tanks in the open air, the implementation of the models is based on the
principles of conservation of mass, energy and momentum
tables of the thermodynamic properties of the exhaust fumes and of the liquid suspension of limestone
Implementation with graphical configurator and solver WinGIPS of process tasks that constitute the mathematical
model of almost all of the plant.
Analysis of the regulation system and modeling of the chains of control necessary for the management of the
plant and to the realization of operational sequences; tuning of the regulation systemImplementation of HMI and
visualization of plant synoptic representation
TYPICAL DATA
Num. variables 60000
66/86
Num. Equations 20000
Year Sdi: 4
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA / SIMATIC S7
CESI
HYBRID POWER GENERATION
EXPERIMENTAL PLANT
AUTOMATION AND CONTROL SYSTEM FOR EXPERIMENTAL HYBRID CELL – MICRO TURBOGAS
POWER GENERATION
SYSTEM ARCHITECTURE
Automation and control are implemented using eXPert system.
eXPert is configured using the following components:
SCADA - Soft PLC (in redundant configuration) with I/O server functionalities:
•
toward ProfibusDP connection to Siemens I/O modules
•
toward Micro-turbogas turbine Bowman with MODBUS serial connection
Two HMI Station, one of which with Soft Logic Editor for automation functions editing using IEC1131 standard
language
3 Rack Cabinets with ET 200M modules (SIMATIC S7 SIEMENS)
MAIN FEATURES
Whole plant supervision and control. The following functionalities have been developed using SOFTPLC
functions:
• Data acquisition, operative sequences management, protection and inter-blocking of plants.
• Commands, inter-blocking for the different plant’s devices.
• Analog signal processing with threshold alarm generation.
• 52 regulation loops, with cycle time of 500 msec, completed by automatic/manual, remote/local function
mode.
I/O DATASET
Digital Input 304
Digital Output 192
Measures 424
Set Point 64
67/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA E STAR RTU
ENEL PRODUZIONE
POWER COGENERATION PLANTS
REMOTE CONTROL SYSTEM FOR COGENERATION PLANTS SUPERVISION
SYSTEM ARCHITECTURE
Remote control central station implemented using eXPert.
eXPert has been configured using the following components:
•
Communications with µSTAR using I/O server functions
•
Run Time Environment for SCADA, HMI and Historian subsystems
•
Integrated Software Tools for soft logic developing using IEC1131 standard and system configuration
eXPert is installed on a PC architecture, rack mounted communication devices are used.
60 RTUs µSTAR distributed over the entire Italian territory using a GSM connection to communicate with the
supervising centre.
MAIN FEATURES
System supervises all remote control functions of cogeneration devices produced by ENEL. These devices are
connected via a GSM network. RTUs can be configured directly from the supervising system and operators
receive notification of all alarms and production data for each single device.
RTUs are interfaced directly with local power generating unit, manage local plant work according with electric and
heat demand, manage plant start and stop, manage historical data recording.
Central supervising station use a set of modems to connect RTUs, this guaranties a good way to expand system
in term of RTU number.
I/O DATASET
Digital Input 16x60
68/86
Digital Output 8x60
Measures 8x60
Set Point 2x60
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
STAR RTU
SNAM RETE GAS
REGIONAL GAS NETWORK
REMOTE CONTROL DEVICES SUPPLY FOR PRESSURE REDUCTION PLANTS AND MEASURE POINTS
FOR SNAM GAS NETWORK (RID AND PIDA)
DEVICES TYPES
nanoSTAR devices supplied in two different configurations:
• RID to supervise and control reduction pipeline points (6 AI + 8 DI)
• PIDA to supervise pressure measurement pipeline points (2 AI + 2 DI) with pressure
transmitters
Electric power supply or photovoltaic supply with a battery
Connection with Maintenance Centre and National Distribution Centre (NCS) using an integrated GSM
modem
NUMBER OF DEVICES SUPPLIED
650 RTUs distributed over the entire Italian territory.
MAIN FEATURES
Monitoring methane gas pressure over particular regional points (PIDA).
Monitoring methane flow and temperature at the pressure reducing plants located over the entire Italian gas
network (RID).
I/O DATASET (FOR EACH DEVICE)
Digital Input 2-8
Digital Output 0
Measures 2-6
Set Point 0
69/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT/RTAP HP-UX
ENI DIV E&P
C.LE GAS DI CROTONE
SCADA CONTROL SYSTEM FOR GAS TREATMENT PLANT LOCATED IN CROTONE AND 7 CONNECTED
OFF-SHORE PLATFORMS
SYSTEM ARCHITECTURE
1 SCADA RTAP redundant system connected to a redundant Front End produced by third party. Front End
stations acquire plant and off-shore platform variables.
6 HMI stations, one of them is dedicated to configuration and maintenance operations (engineering station).
MAIN FEATURES
The system acquire Crotone plant information using a redundant Front-End connected to a redundant Ethernet
LAN.
Other systems connected are: Hera Lacinia and Linda power plant with Cluster A,B,C; Luna A, Luna B, Hera
Lacinia 14, Hera Lacinia Beaf off-shore platform.
I/O DATASET
Digital Input 3222
70/86
Digital Output 100
Measures 570
Set Point 25
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDIPOWER
AMPEZZO HYDRO POWER PLANT
AUTOMATION, CONTROL AND SUPERVISIONE OF AMPEZZO HYDRO POWER PLANT
SYSTEM ARCHITECTURE
1 STOP/PC (SCADA, HMI) workstation
4 HMI workstation for local management of generation units, common and auxiliary plant parts
4 DCS acquisition and control nodes (STAR OHF) witch marshalling cabinets in the turbine hall (regulator) and
outside (bay units).
1 RTU microSTAR for I/O in valve chamber
1 Remote HMI available through secure internet/intranet connection.
MAIN FEATURES
Automation, control and protection of power units and common plant parts.
Serial connection for MODBUS protocol data acquisition from the APG (Power Units Protection Cabinet) and the
ART (Voltage Regulation Cabinet).
Connection to remote telecontrol centre via STCE device.
I/O DATASET
Digital Input672
Digital Output304
Measures168
Set Point 56
71/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDIPOWER
S:FILIPPO DEL MELA THERMAL
POWER PLANT
THERMAL 160 MW POWER PLANT UNITS PROTECTION AND BLOCKING LOGIC ELABORATION
SYSTEM (SEB)
SYSTEM ARCHITECTURE
For each of the 4 power plant units
• 1 STOP/PC (SCADA, HMI) workstation
• 1 DCS acquisition and control node STAR/D OHF (redundant) connected to STOP/PC via LAN Ethernet
TCP/IP
For each couple of generation units (1-2 and 3-4):
• 1 Engineering workstation WIN/PSCS CONFIG
MAIN FEATURES
Logic execution over redundant elaboration boards (parallel execution)
Alarm emission and acquisition and control of relays status
Sequence of Events functionalities.
Management of SPDT and SPST signals
I/O DATASET
Digital Input 1264
72/86
Digital Output 256
Measures 0
Set Point 0
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDIPOWER
C.LE TERMOELETTRICA
S:FILIPPO DEL MELA
PROVISION OF DCS NODES FOR ANALOG MEASURES ACQUISITION
SYSTEM ARCHITECTURE
Redundant SCADA with master/slave hot backup management , external Watch-dog unit.
3 operator workstations (HMI), one of them used also for system configuration (HMI/CONFIG).
4 redundant DCS nodes (acquisition and control station) STAR OHF connected with SCADA over LAN Ethernet
TCP/IP
MAIN FEATURES
Provision for supervision systems groups 1-2 and 3-4, of additional cabinets for analog input measurement
signals with management of RTD signals, replacing the previously installed cabinets
Replacing existing network of field-network based on BITBUS with standard Ethernet TCP/IP.
Update of diagnostics HMI pages.
Supply of OPC server for WIN/SCADA PSCS.
I/O DATASET
Digital Input 1264
Digital Output 256
Measures 230
Set Point 0
73/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
ENI DIV. E&P
GAS COMPRESSION STATION
SPILAMBERTO
COMMAND AND CONTROL SYSTEM SPILAMBERTO GAS TREATMENT PLANT
SYSTEM ARCHITECTURE
2 local HMI workstations (STOP/PC) 1 also used as engineering workstation(CONFIG).
Integrated Front End for radio links communications 13 RTU µSTAR
2 remote HMI workstations at Cavone station telecontrol centre
DCS redundant data acquisition and control node STAR OHF connected to HMI stations via TCP/IP ethernet
LAN.
13 RTU µSTAR located at the gas production wells of the district
MAIN FEATURES
Control of the central gas production and related wells, providing for their functioning from the remote
telecontrol centre.
Management of anti-intrusion devices, remote HMI functions.
I/O DATASET
Digital Input500
74/86
Digital Output100
Measures100
Set Point 16
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA e UAS
TSF
RETE FERROVIARIA RFI
RAILWAY SCADA SYSTEM FOR TRAFFIC MONITORING (CCL/SCT)
SYSTEM ARCHITECTURE
• Redundant SCADA Servers, with master/slave hot backup management, used for the central control
Centers
• STOP/PC (SCADA + HMI) with diagnostic and maintenence functionalities
• HMI 4 monitor for the whole railway line supervision from the Central Control Centers
• STOP/PC (SCADA + HMI) used as peripheral control centers located at the railway stations
• Station acquisition unit (UAS) STAR/CSB (96DI) used for train localization functionalities connected to
railway station STOP/PC
MAIN FEATURES
Real time acquisition and processing in, of the train position data, for each monitored railway line.
Synoptic representation of the train actual position to the respective line central centers, and to the peripheral
stations local centers (Train Describer).
Processing and visualization of delays/advances on time, display of line breaks and out of service.
Management of the composition of trains, causes of delay and messaging between DM (Movement
Managers at the station).
40 central control center stations were installed with synoptic view of the entire line on multi-monitor video
wall; 20 stations with engineering functionalities and 693 individual stations, for a total of 753 SCADA / HMI
systems. Acquisition devices installed (UAS) are more than 700.
I/O DATASET (AVERAGE VALUES FOR EACH RAILWAY LINE)
Digital Input 5000
Devices 2200
String1500
Diagnostic 1500
75/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA
AEM MILANO
RETE GAS MILANO
REMOTE CONTROL AND SUPERVISION SYSTEM OF NATURAL GAS DISTRIBUTION PLANTS (CITY OF
MILAN)
HMI 1
HMI 2
SCADA A
HMI 3 / Config
SCADA B
STAR CSB
Ba y N e tw o rks
Front End 1
Front End 2
HUB
EWDS
32 linee seriali verso
apparati Selta e Gavazzi
Modem Bank
Alle utenze
domestiche
MODEM GSM, PSTN
Impianti di Cassano e
Buccinasco
SYSTEM ARCHITECTURE
SCADA in redundant configuration ( Watch-dog control unit and serial communication device EWDS). On the
same PCs there are data storage functions (HDR) and interface functions with STAR/CSB device.
2 HMI stations with dual monitor, connected with SCADA via LAN network.
1 HMI used even for the on-line system configuration (HMI/CONFIG), connected with SCADA via LAN network.
2 on-line printers, for alarm logging and reports printing, and 1 hard copy printer
1 Front-End in redundant configuration, which acquires plants information using 32 peer to peer communication
lines connecting more than 150 devices
1 Front-End in redundant configuration, which works:
•
telephonic lines (PSTN e GSM) toward RTU devices located in Cassano e Buccinasco (protocol IEC870-5-101)
•
WAN IP connections in order to manage home devices
MAIN FEATURES
Remote control and supervising of methane gas distribution network in Milano, Buccinasco, Cassano d’Adda and
Rosate from different RTU devices produced by third party. System monitors pressure and flow parameters,
alarm parameters and state of different plant devices (valves, boilers, …) and communication state; it also
provides periodic reports, trends and historical operations.
The system controls a total of 62 primary and secondary reduction stations and a total of 690 final reduction
stations.
I/O DATASET
Digital Input 29000
76/86
Digital Output1300
Measures5000
Set Point 0
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT DCS
EDISON
HYDRO POWER PLANT
SONICO
AUTOMATION AND CONTROL OF 130 KV POWER STATION
SYSTEM ARCHITECTURE
2 control room HMI Stations (STOP/PC) 1 of them used also as engineering workstation (CONFIG).
6 local HMI 5 of which are in the turbine hall (5 turbine units) and 1 for the HV electric substation.
Connection to the remote telecontrol center.
7 DCS nodes STAR/OHF ( 5 for the generation units, 1 common plant part, 1 HV substation) connected in
Ethernet fiber optic network.
MAIN FEATURES
Control of the 5 Groups turbine alternator; control sequences for power production management and
maintenance tasks.
HV/MV substation control, common plant parts management
System interfacing with the telecontrol system.
(penstock, refrigeration plant, fire, ecc).
Design and implementation of level adjustment, hydraulic turbines management according to the measure of
the level of the load tank of the plant.
I/O DATASET
Digital Input1840
Digital Output 576
Measures 344
Set Point 16
77/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA/SIMATIC S7
BERGAMO AMBIENTE SERVIZI
BERGAMO WASTE INCINERATOR
AUTOMATION, CONTROL, PROTECTION AND INTERBLOCKING FOR POWER GENERATION PLANT
FROM WASTE I
COMPUTER ROOM
STOP PC
CONFIG
STOP PC
STOP PC
Documentation
Station
Maintenance
Station
ink jet
printer
ink jet
printer
Shut-down
Panel
REDUNDANT PLANT NETWORK Industrial Ethernet 100MB/s
DCS-2 System
DCS-1 System
I/O Locale
MCC 1 - 2
Remote I/O - 1A
1
Remote I/O - 1B
Remote I/O - 1C
Remote I/O - 2A
Remote I/O - 2B
Remote I/O - 2C
7 Remote I/O - 2D
Profibus DP (Optical line)
Redundant Serial Link
MODBUS RS-485
Profibus DP (Electrical line)
PC
Industriale
PC
Industriale
Profibus DP (Optical line)
Profibus DP (Electrical line)
PC
Industriale
PC
Industriale
Serial Link ModBus RS232C
ESD System
A
B
AS414 FH
I/O locale
Remote I/O - 5A
Pannello Protezioni
MCC 3 - 4 - 5 - 6 - 7
1 Remote I/O - 3A
Remote I/O - 3B
Remote I/O - 3C
Remote I/O - 3D
Remote I/O - 3E
6 Remote I/O - 4A
SYSTEM ARCHITECTURE
2 redundant eXPert SCADA, with I/O connected over Profibus DP, for boiler automation and fumes treatment
1 PLC Siemens SIMATIC S7, fail safe certified, for Emergency Shut Down (ESD) services of the plant.
2 STOP/PC and one STOP/PC CONFIG placed in control room for plant supervision and system configuration.
1 Maintenance Station, used for planned, preventive and corrective maintenance of the whole plant and of the
control system.
1 Documentation Station
Industrial Ethernet LAN 100MB/s in fiber optic ring configuration.
MAIN FEATURES
Plant Supervision and control of the incinerator plant and of the power production (10Mw).
I/O DATASET
Digital Input 1400
78/86
Digital Output 500
Measures 350
Set Point 100
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA / RTAP
ENI E&P
CASALBORSETTI GAS
CONTROL CENTRE
OFFSHORE PLATFORMS TELECONTROL
LAN TCP/IP SISTEMA DI
ANDROMEDONE
OS 2
OS 1
OS 3
OS 4
ROUTER
CONFIG
ROUTER
OS 5
MMI
MMI
MMI
MMI
LAN ETHERNET TCP/IP
SCADA
LAN ETHERNET
SCADA
PRINTER SERVER
ROUTER
ROUTER
PIATTAFORMA
GARIBALDI C
STAMPANTE EVENTI N. 2
STAMPANTE EVENTI N.1
HARD COPY
STAMPANTE TABULATI
LINEE SERIALI RS232C
F.E. A
F.E. B
DCS BAILEY
INFI 90
Enel 220 Vac
5 AI
5 DI
1 DO
I/O PONTE
RADIO N. 1
Rete Telecom
I/O PONTE
RADIO N. 2
modem
serviziomodem
fonia
A
D
C
B
MATRICE
DI COMMUTAZIONE
al sistema di misura fiscale Tartarini
linea seriale RS232C - 9600 bauds
"
Cameretta Primaro
Rete Cellulare GSM
modem
isdn
ai vecchi sistemi
di telecontrollo D.G.
modem
modem
D
A
B
C
MATRICE
DI COMMUTAZIONE
RTUµSTAR
5 AI
5 DI
1 DO
servizio
fonia
Enel 220 Vac
RTUµSTAR
Telecamera
Cameretta Santerno
RTU 1
RTU 2
RTU 16
RTU n
RTU 1
PIATTAFORMA
N.PANDORA
RTU 16
PIATTAFORME
GARIBALDI
LAYOUT SISTEMA
DI TELECONTROLLO
CENTRALE DI CASALBORSETTI
SYSTEM ARCHITECTURE:
Redundant SCADA based on HP 9000-D230 Server (UNIX), master/slave management, hot back-up.
5 local human machine interfaces (HMI), 1 used also as Engineering Workstation (HMI/CONFIG), all based on
HP 9000-712 Workstation (OS UNIX). System LAN Ethernet TCP/IP. Remote HMI installed on Garibaldi C offshore platform.
2 on-line printers for alarm logging and reports printing, and 1 hard copy printer.
1 front-end sub-system (redundant), CPU Pentium based microprocessor system, dedicated to data acquisition
from off-shore platforms (max. 32) using SDLC communication protocol.
Software interface to DCS Bailey, that provides automation and control of Centre plants. The software interface
provides data acquisition and visualization to Control Centre operators.
MAIN FEATURES:
Supervision, remote control and automation of 32 offshore platforms and/or clusters
Production historical data management, communication with Andromedone gas dispatching centre.
I/O DATASET
Digital Input 15000
Digital Output 3500
Measures 3000
Set Point 512
79/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA / RTAP
ENI E&P
RUBICONE GAS CONTROL
CENTRE
SCADA SYSTEM FOR GAS TREATMENT PLANT AND RTUs FOR REMOTE CONTROL OF
10 OFFSHORE PLATFORMS
OS 1
OS 2
OS 3
LAN TCP/IP SISTEMA DI
ANDROMEDONE
CONFIG
ROUTER
MMI
FEP
OS 4
ROUTER
MMI
MMI
MMI
MMI
LAN ETHERNET TCP/IP
SCADA
LAN ETHERNET
MMI
PRINTER SERVER
SCADA
ROUTER
ROUTER
P.MA
CERVIA C
STAMPANTE TABULATI
HARD COPY
STAMPANTE EVENTI N. 2
STAMPANTE EVENTI N.1
LAN DUALE BITBUS
F.E. A
FEP MODBUS DUALE
F.E. B
STAR 1
I/O PONTE
RADIO N. 1
I/O IMPIANTI
DI CENTRALE
ROUTER
SISTEMA DI
F&G
CENTRALE
PONTE RADIO
A 2GB
sistema misura fiscale Tartarini
SISTEMI DI
CONTROLLO
IMPIANTI FUTURI
linea seriale RS232C - 9600 bauds
modem
servizio modem
fonia
A
D
C
B
MATRICE
DI COMMUTAZIONE
radio
radio
RTU
ANTONELLA
CERVIA A
CERVIA B
ARIANNA
CERVIA C
ANEMONE Cl
ANEMONE B
RTU 16
IMS
isdn
modem
RTU
µ STAR
P.MA MORENA
Rete Telecom
Enel 220 Vac
RTU
µ STAR
IMS
P.MA CERVIA K
DCS ABB
Rete Cellulare GSM
Cameretta 1
Cameretta 2
RTU
µ STAR
LAYOUT SISTEMA
DI TELECONTROLLO
CENTRALE DI RUBICONE
SYSTEM ARCHITECTURE
Redundant SCADA based on HP 9000-D230 Server (UNIX), master/slave management, hot back-up.
5 local human machine interfaces (HMI), 1 used also as Engineering Workstation (HMI/CONFIG), all based on
HP 9000-712 Workstation (OS. UNIX). System LAN Ethernet TCP/IP. Remote HMI installed on Cervia C off-shore
platform.
3 on-line printers for alarm logging and reports printing, and 1 hard copy printer.
1 front-end sub-system (redundant), CPU Pentium based microprocessor system, dedicated to data acquisition
from off-shore platforms (max. 32) using SDLC communication protocol.
MAIN FEATURES
Supervision, remote control and automation of 16 offshore platforms and/or clusters (Anemone Cluster, Anemone
B, Azalea B, Cervia A, Cervia B, Cervia C, Antonella, Arianna, Morena, Naide).
Production historical data management, communication with Andromedone gas dispatching centre.
I/O DATASET
Digital Input 18000
80/86
Digital Output 3000
Measures 4000
Set Point 512
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
EXPERT SCADA / RTAP
ENI E&P
FANO GAS CONTROL CENTRE
SCADA SYSTEM FOR GAS TREATMENT PLANT AND RTUs FOR REMOTE CONTROL OF 6 OFFSHORE
PLATFORMS
OS 1
OS 2
OS 3
LAN TCP/IP SISTEMA DI
ANDROMEDONE
ROUTER
CONFIG
MMI
FEP
OS 4
ROUTER
MMI
MMI
MMI
MMI
LAN ETHERNET TCP/IP
SCADA
LAN ETHERNET
MMI
PRINTER SERVER
SCADA
ROUTER
ROUTER
P.MA
CERVIA C
STAMPANTE TABULATI
HARD COPY
STAMPANTE EVENTI N. 2
STAMPANTE EVENTI N.1
F.E. A
GATEWAY
F.E. B
I/O PONTE
RADIO N. 1
DCS MOORE APACS
sistema misura fiscale Tartarini
linea seriale RS232C - 9600 bauds
modem
servizio modem
fonia
A
D
C
B
MATRICE
DI COMMUTAZIONE
RTU
BASIL
BRENDA
DARIA A/B
REGINA
ANNALISA
I/O CENTRALE FANO E COMPRESSORI
isdn
modem
Rete Telecom
ANNABELLA
Enel 220 Vac
RTU 16
RTU
µ STAR
Rete Cellulare GSM
Cameretta 3
Cameretta 1-2
RTU
µ STAR
LAYOUT SISTEMA
DI TELECONTROLLO
CENTRALE DI FANO
SYSTEM ARCHITECTURE
•
•
•
•
REDUNDANT SCADA based on HP 9000-D230 Server (UNIX), master/slave management, hot back-up.
5 local human machine interfaces (HMI), 1 used also as Engineering Workstation (HMI/CONFIG), all based
on HP 9000-712 Workstation (OS UNIX). System LAN Ethernet TCP/IP. Remote HMI installed on Garibaldi
C off-shore platform.
1 on-line printer for alarm logging and reports printing, and 1 hard copy printer.
1 front-end sub-system (redundant), CPU Pentium based microprocessor system, dedicated to data
acquisition from off-shore platforms (max. 32) using SDLC communication protocol.
MAIN FEATURES
Supervision, remote control and automation of 6 offshore platforms and/or clusters (Annabella, Brenda, Basil,
Daria A/B, Regina, Annalisa).
Production historical data management, communication with Andromedone gas dispatching centre.
I/O DATASET
Digital Input 19000
Digital Output 3000
Measures 4000
Set Point 1000
81/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
STOP PC
AVIO / ENEL
MONTALTO DI CASTRO
TURBOGAS POWER PLANT
4 SUPERVISION AND CONTROL SYSTEM TURBOGAS UNITS 1/2/3/4 MONTALTO DI CASTRO POWER
PLANT
ARCHITECTURE (FOR EACH SYSTEM)
•
•
•
•
4 local operator workstations (STOP/PC), 2 in control room, 2 in turbine cabin.
Connection via redundant BitBus "INET" network to automation and control cabinets of turbogas units.
1 operator workstation is used also as on-line control system engineering worstation (STOP-PC/CONFIG)
2 on-line printers, for journaling and reports, 1 hard copy printer on line
MAIN FEATURES
Supervision and control of the 4 turbogas power units of the ENEL Montalto di Castro Power Plant, using 4
separate systems.
SOE list functionality (with chronological reordering of the signals coming from the different DCS nodes) is also
provided.
I/O DATASET
Digital Input 3200
82/86
Digital Output 500
Measures 600
Set Point 256
eXPert - Main References - Rev. 01
PRODUCT
STOP/FE µSTAR
CUSTOMER
AZIENDA GARDESANA SERVIZI
PLANT
WASTEWATER COLLECTOR
TELECONTROL
DISTRIBUTED SYSTEM FOR AUTOMATION, SUPERVISION AND TELECONTROL OF WASTEWATER
COLLECTION OF EASTERN GARDA
SYSTEM ARCHITECTURE
Redundant SCADA with master/slave hot backup management, external watch dog (EWDS) with serial lines
switching functionality.
•
N. 2 HMI stations one of witch with engineering workstation capabilities for the on-line configuration of
the whole system (WIN/CONFIG).
•
N. 1 remote HMI station, based on Notebook, provided to the staff on duty on call.
•
N. 2 online printers dedicated to the functions of journaling, print outs, hard-copy.
•
N. 75 RTU Sdi µSTAR for data acquisition and sending commands to remote sites, connected to the
central system through the switched telephone network (PSTN and ISDN) and cellular network (GSM).
MAIN FEATURES
Supervision and telecontrol system of collection sewer Veronese coast of Lake Garda run by the Azienda
Gardesana Servizi (AGS).
The system consists of a coastline collector of about 60 km that collects waste water from municipalities, through
appropriate pumping stations, to the purification plant of Peschiera del Garda.
75 µSTAR RTU placed in special stations along the sewer, exchange digital and analog data and provide
automation logic at local and supervisory system.level.
The system also has the management function (call) of staff on duty with the possibility of connection to the
central system, through appropriate remote HMI.
I/O DATASET
Digital Input1200
Digital Output600
Measures600
Set Point 150
83/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
WIN/PSCS
EDISON
PORTO MARGHERA
ALARM SYSTEM E RCE OF POWER PLANT PORTO MARGHERA
SYSTEM ARCHITECTURE
Monitoring and control station WIN/STOP-PC with engineering workstation functionalities for the entire system
(WIN/CONFIG). The station is connected via Ethernet with TCP / IP to the automation DCS cabinet (STAR/ OHF).
The cabinet consists of the automation multifunction DCS node STAR/OHF, completed with the necessary
physical I/O boards.
MAIN FEATURES
Alarm system and SOE recording system for the thermoelectric power plant EDISON of Porto Marghera Levante.
I/O DATASET
Digital Input 300
84/86
Digital Output 8
Measures 0
Set Point 0
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
STOP PC
AVIO / ENEL
CENTRALE TERMINI
IMERESEO
2 SUPERVISION AND CONTROL SYSTEM TURBOGAS UNITS 1 AND 2 TERMINI IMERESE POWER PLANT
ARCHITECTURE (FOR EACH SYSTEM)
•
•
•
•
4 local operator workstations (STOP/PC), 2 in control room, 2 in turbine cabin.
Connection via redundant BitBus "INET" network to automation and control cabinets of turbogas units.
1 operator workstation is used also as on-line control system engineering worstation (STOP-PC/CONFIG)
2 on-line printers, for journaling and reports, 1 hard copy printer on line
MAIN FEATURES
Supervision and control of the 2 turbogas power units of the ENEL Termini Imerese Power Plant, using 2
separate systems.
SOE list functionality (with chronological reordering of the signals coming from the different DCS nodes) is also
provided.
Connection with the remote coordination system of ENEL (SCC).
I/O DATASET
Digital Input 3200
Digital Output 500
Measures 600
Set Point 256
85/86
eXPert - Main References - Rev. 01
PRODUCT
CUSTOMER
PLANT
STOP FE
AEM GAS
DISTRICT HEATING
TELECONTROL OF CENTRAL HEATING AND DISTRICT HEATING SUBSTATION
SYSTEM ARCHITECTURE
•
•
•
•
•
•
Redundant SCADA with master/slave hot backup management, external watch-dog unit with serial lines
switching
Front End functionalities (switched lines management, patrols, communication protocols implementation)
integrated in SCADA stations.
2 local HMI availables on the same units used for SCADA functions, 1 of wich used also as on-line
engineering workstation (MMI/CONFIG).
1 remote HMI station
due modem per la gestione della comunicazione fra il sistema centrale e le apparecchiature NITEL
2 on-line printersfor journaling and reports, 1 hard copy printer.
MAIN FEATURES
Management of 7 Heating Plants and 350 district heating substations.
Treatment of acquired measures, and implementation of remote settings or set-point setting of instrumentation
and / or local equipment connected to the center by the teleoperation peripheral devices (NITEL).
Creating and viewing of "schedules" on daily and weekly basis.
Graphical representation of the curve of heating and cooling with ability to view and change the settings of the
curve.
I/O DATASET
Digital Input 1000
86/86
Digital Output 150
Measures 2200
Set Point 400