List of Papers and conference proceedings 2000-2013
1) Calliari, I., Canovaro, C., Asolati, M., Saccocci, A., Grazzi, F., Scherillo, A.Orio Malipiero's and Enrico
Dandolo's denarii: Surface and bulk characterization, (2013) Applied Physics A: Materials Science and
Processing, 113 (4), pp. 1081-1087.
2) Canovaro, C., Calliari, I., Asolati, M., Grazzi, F., Scherillo, A.,Characterization of bronze Roman coins
of the fifth century called nummi through different analytical techniques, (2013) Applied Physics A:
Materials Science and Processing, 113 (4), pp. 1019-1028.
3) Calliari, I., Bassani, P., Brunelli, K., Breda, M., Ramous, E.,Effect of continuous cooling on secondary
phase precipitation in the super duplex stainless steel ZERON-100, (2013) Journal of Materials
Engineering and Performance, 22 (12), pp. 3860-3866.
4) Breda, M., Calliari, I., Ramous, E., Pizzo, M., Corain, L., Straffelini, G.,Ductile-to-brittle transition in a
Zeron®100 SDSS in wrought and aged conditions,(2013) Materials Science and Engineering A, 585,
pp. 57-65.
5) Canovaro, C., Breda, M., Miranda Pérez, A.F., Vajna, E., Calliari, I.,Metallographic characterization of
a 19th century scudo: The coin turns into medal ,Caratterizzazione metallografica di uno scudo romano
del XIX secolo: La moneta diventa medaglia], (2013) Metallurgia Italiana, 105 (10), pp. 41-47.
6) Bassani, P., Breda, M., Brunelli, K., Mészáros, I., Passaretti, F., Zanellato, M., Calliari,
I.,Characterization of a cold-rolled 2101 lean duplex stainless steel,(2013) Microscopy and
Microanalysis, 19 (4), pp. 988-995.
7) Poletto, L., Calliari, I., Ratti, F., Simioni, E.,X-ray shape-from-silhouette for three-dimensional
modelling applied to ancient metallic handworks,(2013) Journal of Cultural Heritage, 14 (3 SUPPL),
pp. e169-e175.
8) Bisaglia, F., Toniolo, M., Basoni, J., Calliari, I., Ramous, E.,Manufactoring problems on the close die
and open die forging pieces in stainless steel ASTM A182 F55 [Problematiche di produzione di
stampati e forgiati in acciaio inossidabile ASTM A182 F55],(2013) Metallurgia Italiana, 105 (5), pp.
11-15.
9) Calliari, M. Breda, E. Ramous, K.Brunelli, M. Pizzo and C. Menapace (2012). Impact
Toughness of an Isothermally Treated Zeron®100 SDSS . JOURNAL OF MATERIALS
ENGINEERING AND PERFORMANCE, ISSN: 1059-9495, doi: 10.1007/s11665-012-0138y
10) I.Calliari, M.Breda, C.Canovaro, A.F.Miranda Perez (2012). from coins to medal: a
metallurgical study of the brazing drop on a XIX century scudo. JOM, vol. 64, p. 1350-1354,
ISSN: 1047-4838, doi: 10.1007/s11837-012-0455-5
11) A.F. Miranda Pérez, I. Calliari, K. Brunelli, F.A. Reyes Valdés and G. Y Pérez Medina
(2012). ANALYSIS OF THE MICROSTRUCTURE AND MECHANICAL PROPERTIES
OF DUAL PHASE STEEL UNDER THE EFFECTS OF DIFFERENT BRAZING RATES.
In: A.Reyes-Valdes. MRS Online Proceedings Library 2011 IMRC Meeting - Symposium
S22 –. MRS PROCEEDINGS, vol. 1381, cambridge journal online, ISSN: 1946-4274,
cancun, agosto 2011
12) Bozena Sartowska, Jerzy Piekoszewski, Lech Walis, Marek Barlak, Irene Calliari, Katya
Brunelli, Jan Senatorski, Wojciech Starosta (2012). Alloying the near surface layer of
stainless steel with rare earth elements (REE) using high intensity pulsed plasma beams
(HIPPB). DIFFUSION AND DEFECT DATA, SOLID STATE DATA. PART B, SOLID
STATE PHENOMENA, vol. 186, p. 292-295, ISSN: 1012-0394, doi:
10.4028/www.scientific.net/SSP.186.292
13) I. CALLIARI, MAURIZIO MAGRINI, RODOLFO MARTINI, CHIARA TELLINI,
EUGENIO VAINA (2011). Metallurgical and technological Investigation on Augustean
Auxiliary coins from Thraco-Moesia. ARCHÉOSCIENCES, vol. 35, p. 9-18, ISSN: 19601360
14) I. CALLIARI, S.BALDO, A.MIRANDA PEREZ, G.TORTORETO, I.MESZAROS (2011).
Magnetic and metallographic investigation of phase transformations in duplex stainless steels.
In: 8th International Workshop onProgress inAnalytical Chemistry&Materials
characterisationin the Steel and Metals Industries. p. 326-330, Lussenburgo, May 2011
15) K.BRUNELLI, I. CALLIARI, M.DABALÒ, M-MAGRINI, I.RAMPIN (2011). Metallurgical
and mechanical characterization of Cu electrolytic coating on Aluminium alloys. In: -.
Proceedings of the 8th conference on Progress inAnalytical Chemistry&Materials
characterisationin the Steel and Metals Industries. Lussenburgo, May 2011, p. 326-330,
Lussemburgo:CETAS
16) I. CALLIARI, PELLIZZARI M, RAMOUS E (2011). Precipitation of secondary phases in
super duplex stainless steel ZERON100 isothermally aged.. MATERIALS SCIENCE AND
TECHNOLOGY, vol. 27, p. 928-932, ISSN: 0267-0836, doi: 10.1179/174328409X463243
17) Simioni E., Ratti F., Calliari I., Poletto L. (2011). Three-dimensional modeling using x-ray
shape-from-silhouette,. APPLIED OPTICS, vol. 50, p. 3282-3288, ISSN: 0003-6935, doi:
10.1364/AO.50.003282
18) Calliari, I. Pellizzari, M., Zanellato, M., Ramous, E (2011). The phase stability in Cr-Ni and
Cr-Mn duplex stainless steels. JOURNAL OF MATERIALS SCIENCE, vol. 26, p. 69166924, ISSN: 0022-2461, doi: 10.1007/s10853-011-5657-7
19) Arturo Reyes, Irene Calliari, Emilio Ramous, Michela Zanellato, Mattia Merlin (2011).
Secondary Phases Precipitation in the 2510 Duplex Stainless Steel. In: A.Reys-Valdes. MRS
Proceedings. MRS PROCEEDINGS, vol. 1242, p. 58-63, Cambridge University Press: 2011,
ISSN: 1946-4274, Cancun, agosto 2009, doi: 10.1557/PROC-1242-S4-58
20) - CALLIARI I., RAMOUS E, BASSANI P (2010). Phase transformation in duplex stainless
steels after isothermal, treatments, continuous cooling and cold working. MATERIALS
SCIENCE FORUM, vol. 638-642, p. 2986-2991, ISSN: 0255-5476, doi:
10.4028/www.scientific.net/MSF.638-642.2986
21) CALLIARI I., A.REYES, E.RAMOUS, MI.ZANELLATO, M.MERLIN (2010). Secondary
phases precipitation in 2510 duplex stainless steel. In: -. Materials characterization. cancun,
Mexico, august 2009, vol. 1242, p. 227-232, WARRENDALE:MRS, ISBN: 9781605112190
22) EMANUELE SIMIONI, FILIPPO RATTI, CALLIARI I., LUCA POLETTO (2010). 3D
reconstruction with X-ray shape from silhouette,. In: The Society of Photo-Optical
Instrumentation Engineers (SPIE). Proceedings of SPIE - The International Society for
Optical Engineering, 2010, Developments in X-Ray Tomography VII. vol. 7804, -, ISBN:
9780819483003, doi: 10.1117/12.861599
23) F.A. REYES-VALDes, V. H. LÃ"PEZ-CORTÉS, G.Y. PEREZ-MEDINA, H. F. LOPEZ M. MERLIN, CALLIARI I. (2010). EFFECT OF WELDING ON THE MECHANICAL
INTEGRITY OF A AHSS-TRIP STEEL. In: -. Proceedings of SHSS,. Peschiera, 17-20
ottobre 2010, MILANO:AIM
24) S.BALDO, CALLIARI I., M.ZANELLATO, I.MESZAROS (2010). Phase transformation in
2101 DSS after cold rolling. In: Charles . Proceedings of the international conference Duplex
2010. Beaunè¨, ottobre 2010, -
25) CALLIARI I., PELLIZZARI M, BALDO S, ZANELLATO M, RAMOUS E (2010). Analysis
of phase stability in Cr-Ni and Cr-Mn DSS.. In: Charles. Proceedings of Duplex 2010.
Beaunè (France), ottobre 2010, 26)
27) CALLIARI I., E.RAMOUS, M.PELLIZZARI, K.BRUNELLI, R. BERTELLI (2010).
Microstructural stability of isothermally aged 2510 duplex stainless steel.. In: proceedings of
the conference Duplex 2010. -, Beaunè (France), ottobre 2010
28) I. RAMPIN, M. PIAZZA, S. BALDO, MIRANDA PEREZ A.F., K. BRUNELLI, I.
CALLIARI, F.A. REYES VALDes (2010). The effect of braze-welding speed on the
microstructure and mechanical properties of dual phase steel. . In: -. Super High Strength
Steels. 2nd International Conference. Peschiera di garda, 17-20 October 2010,
MILANO:AIM, ISBN: 9788885298798
29) - CALLIARI I, STRAFFELINI G, RAMOUS E. (2010). Investigation of secondary phases
effect on 2205 DSS fracture toughness. . MATERIALS SCIENCE AND TECHNOLOGY,
vol. 26, p. 81-86, ISSN: 0267-0836, doi: 10.1179/174328408X388103
30) TORTORETO G, GRAZZI F, SCHERILLO A, SALEMI G., CALLIARI I (2010).
Application of Metallurgical and Structural Techniques for Archeological and Historical
Objects Characterization. . In: -. International conference on ,Analysis for iron and steel
industry. Pechino, 15 -18 settembre 2010, PECHINO:ICASI
31) Simioni E., Ratti F., Calliari I., Poletto L (2010). Three-dimensional reconstruction with Xray shape-from-silhouette. In: SPIE - The International Society for Optical Engineering, .
luglio 2010, p. 1-10, Stock
32) Calliari, I., Ramous, E., Brunelli, K. (2010). Different metallurgical methods for measuring
secondary phases precipitation in duplex stainless steels. YEJIN FENXI, vol. 30, p. 12-16,
ISSN: 1000-7571
33) F. A. REYES-VALDÉS, I. CALLIARI, V. H. LÓPEZ-CORTÉS, S. BALDO, G.Y. PEREZMEDINA, K. BRUNELLI, V. GARCIA-CUSTODIO (2009). Welding process parameters
impact on the corrosion susceptibility of advanced high strength martensitic steels (AHSS)
used in the automotive industry. In: -. Proceedings IPROGRESSIVE STRUCTURAL
MATERIALS AND THEIR Joining technologies. High Tatras, Stará Lesná, Slovakia, 14-16
ottober 2009
34) CALLIARI I, BRUNELLI K, DABALA' M., RAMOUS E (2009). Measuring Secondary
Phases in Duplex Stainless Steels . JOM, vol. 61, p. 80-83, ISSN: 1047-4838, doi:
10.1007/s11837-009-0016-8;
35) CALLIARI I., M.DABALA', RAMOUS E, G.STRAFFELINI (2009). New lean duplex
stainless steels for structural applications. . MATERIALS SCIENCE FORUM, vol. 604-605,
p. 419-426, ISSN: 0255-5476, doi: 10.4028/3-908453-09-7
36) I.CALLIARI, K.BRUNELLI, M.ZANELLATO, RAMOUS E., R.BERTELLI (2009).
Microstructural modification during isothermal ageing of a low nickel duplex stainless steel. .
JOURNAL OF MATERIALS SCIENCE, vol. 44, p. 3764-3769, ISSN: 0022-2461, doi:
10.1007/s10853-009-3505-9
37) ASOLATI M., CALLIARI I., CONVENTI A., CRISAFULLI C. (2009). Le emissioni
provinciali di Traiano per la Cirenaica: nuove evidenze dalle indagini archeometriche e
dall'analisi dei coni . RIVISTA ITALIANA DI NUMISMATICA E SCIENZE AFFINI, vol.
CX, p. 317-364, ISSN: 1126-8700
38) - STRAFFELLINI G, BALDO S, CALLIARI I, RAMOUS E. (2009). Effect of Aging on the
Fracture Behaviour of Lean Duplex Sainless Steel. . METALLURGICAL AND
MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS
SCIENCE, vol. vol. 40A,, p. 2616-2621, ISSN: 1073-5623, doi: 10.1007/s11661-009-9968-0;
39) S. Baldo, M. Zanellato, I. Calliari (2009). Analisi FEM dell'effetto dimensionale sulla
precipitazione di fasi secondarie a raffreddamento in un acciaio inossidabile Duplex 2205. In:
heat treatment. salsomaggiore, maggio 2009, Associazione Italiana di Metallurgia, ISBN:
8885298680
40) CALLIARI I., RAMOUS E, REBUFFI G, STRAFFELINI G (2008). Studio dell'effetto delle
fasi secondarie della tenacita' a frattura in un 2205 DSS. METALLURGIA ITALIANA, vol.
100, p. 5-8, ISSN: 0026-0843
41) CALLIARI I, DABALA' M., REBUFFI G, RAMOUS E, GIANOTTI E (2008). La coltre
bianca negli strati nitrurati in acciai a vario contenuto di carbonio. METALLURGIA
ITALIANA, vol. 4, p. 37-42, ISSN: 0026-0843
42) S.BALDO, K.BRUNELLI, CALLIARI I., M.DABALÀ, L.NODARI, M.ZANELLATO,
R.BERTELLI (2008). Trasformazioni strutturali in un duplex a basso Nichel. In: -. PROC.
CONVEGNO NAZIONALE AIM,. Ferrara, settembre 2008, MILANO:aim, ISBN:
8885298672
43) CALLIARI I., L. MARITAN, C.MAZZOLI, L.NODARI, E.RAMOUS, M.GAMBA (2008).
Slag fragments in pottery mortars from Este (Italy),. In: -. proc of Early Iron in Europe,
Conference Huettenberg 2008. Huttenberg, settembre 2008, VIENNA:Brigitte Cech
44) CALLIARI, I. RAMPIN, CALLIARI I. (2008). The influence of rolling textures on nitriding
behaviour of C40 steel,. In: -. PROC OF INDUSTRIAL HEAT TREATMENT,.
salsomaggiore, giugno 2008, MILANO:aim,, ISBN: 8885298524
45) CALLIARI I., J. DOBRANSZKY, E. RAMOUS, G. STRAFFELINI, G.REBUFFI (2008).
Investigation on low Ni duplex stainless steel grade. . In: -. Proc.6th European Stainless Steels
Conference. Helsinky, 10-13 june 2008, p. 629-636, STOKHOLM:Jernkontoret
46) CALLIARI I, MARITAN I, MAZZOLI C, NODARI L, RAMOUS E., GAMBA M (2008).
Studio metallografico di "inclusi" in una coppa ceramica di provenienza atestina. . In: -. ATTI
DEL 32 CONVEGNO NAZIONALE AIM. Ferrara, 22-25 settembre 2008, MILANO:AIM,
ISBN: 8885298672
47) I.CALLIARI, M.DABALA', G.REBUFFI, RAMOUS E., E.GIANOTTI (2008). La coltre
bianca negli strati nitrurati in acciai a vario contenuto di carbonio. . METALLURGIA
ITALIANA, vol. 100, p. 27-32, ISSN: 0026-0843
48) I.CALLIARI, M.ZANESCO, M.DABALA', K.BRUNELLI, RAMOUS E. (2008).
Investigation of microstructure and properties of Ni-Mo martensitic stainless steel. .
MATERIALS & DESIGN, vol. 29, p. 246-250, ISSN: 0264-1275, doi:
10.1016/j.matdes.2006.11.02
49) AGNOLI F, CALLIARI I., MAZZOCCHIN GA (2007). Use of different spectroscopic
techniques in the analysis of Roman age wall paintings. ANNALI DI CHIMICA, vol. 97, p.
1-7, ISSN: 0003-4592, doi: 10.1002/adic.200690093
50) MAGRINI M, E. RAMOUS, CALLIARI I (2007). Matallurgical and technological study of
bronze objects of ancient venetic people . In: -. proceedings of Science and technology for
cultural heritage. ACAYA, VERNOLE (LE), 11-15 giugno 2007, vol. CD, CNR-Univrsità di
Alcalà, ISBN: 8481384534
51) CALLIARI I, MAGRINI M, E. RAMOUS, VAJNA E (2007). Investigation on augustean
auxiliary coins from thraco-moesic area. . In: -. Proc.Int.Conf. Archeometallurgy in Europe.
Grado 2007, 18-21 june 2007, p. 1-7, MILANO:AIM, ISBN: 8885298613
52) CALLIARI I, ZANESCO M, RAMOUS E., BASSANI P (2007). Effects of Isothermal
Ageing and Continuous Cooling after Solubilization in a Duplex Stainless Steel. . JOURNAL
OF MATERIALS ENGINEERING AND PERFORMANCE, vol. 16(1), p. 109-112, ISSN:
1059-9495, doi: 10.1007/s11665-006-9017-8;
53) P. BASSANI, F. PASSARETTI, CALLIARI I., K. BRUNELLI, G. REBUFFI (2007). EBSD
INVESTIGATION ON A 2507 DUPLEX STEEL. . In: -. Proceeedings of Duplex 2007.
Grado, giugno 2007, MILANO:AIM, ISBN: 8885298605
54) CALLIARI I, RAMOUS E., REBUFFI G, ZANESCO M, STRAFFELINI G (2007).
Investigation of the secondary phases effects on a 2205 DSS fracture thoughness. . In: -.
Proceedings of Duplex 2007. Grado, giugno 2007, p. 45-52, MILANO:AIM, ISBN:
8885298605
55) CALLIARI I., M. ZANESCO, E. RAMOUS, R. BERTELLI (2007). Microstructure and
properties modifications after isothermal aging of a low nickel DSS . In: -. PROC OF
DUPLEX 2007. Grado, giugno 2007, vol. paper n31, p. 37-44, MILANO:AIM, ISBN:
8885298605
56) MAURIZIO MAGRINI, RODOLFO MARTINI, EMILIO RAMOUS, CALLIARI I. (2007).
INVESTIGATION ON AUGUSTEAN AUXILIARY COINS FROM THRACO-MOESIC
AREA,. In: -. proc of Archeometallurgy in Europe, Grado2007. Grado, giugno 2007, vol. CD,
MILANO:AIM, ISBN: 8885298710
57) I.Calliari, P.Bassani, G.Rebuffi, K.Brunelli, F.Passaretti (2007). EBSD investigation on a
2507 duplex stainless steel. In: -. Duplex 2007. Grado, giugno 2007, MILANO:AIM, ISBN:
8885298605
58) CALLIARI I., M.ZANESCO, RAMOUS E. . (2006). Influence of isothermal aging on
secondary phases precipitation and toughness of a duplex stainless steel SAF 2205 .
JOURNAL OF MATERIALS SCIENCE, vol. 54, p. 1266-1279, ISSN: 0022-2461, doi:
10.1007/s10853-006-0857-2
59) CALLIARI I., DABALA M, RAMOUS E, M.ZANESCO, GIANOTTI E (2006).
.Microstructure of a nitrided steel previously decarburized . JOURNAL OF MATERIALS
ENGINEERING AND PERFORMANCE, vol. 15, p. 693-698, ISSN: 1059-9495, doi:
10.1361/105994906X150740
60) CALLIARI I., M.DABALA, M.ZANESCO, E.GIANOTTI, E.RAMOUS (2006). The
behaviour of decarburized layers in steel nitriding . METALLURGIA ITALIANA, vol. 98, p.
15-20, ISSN: 0026-0843
61) CALLIARI I, DABALA M, ZANESCO M, E. BERNARDO, OLMI F, VAGELLI G (2006).
Surface characterization of a decarburized and nitrided steel . MICROSCOPY AND
MICROANALYSIS, vol. 12, p. 335-339, ISSN: 1431-9276, doi:
10.1017/S1431927606060417
62) I.CALLIARI, M.ZANESCO, P.BASSANI, RAMOUS E. (2006). Analysis of secondary
phases precipitated in duplex stainless steels . In: J.Angeli. proc. Of CETAS 2006 (7th
Progress in Analytical Chemistry in the Steel and Metal Industries, May 2006 Luxembourg),.
LUXEMBOURG, 16-18 May 2006, p. 477-482, LUXEMBOURG:VGE, ISBN: 3773960166
63) ZAGHIS F., MOLIN G., SALVIULO G., CALLIARI I., RAMOUS E., GANGEMI G.
(2005). A new setting for the northern border of the Veneti: metallic finds from the venetic
site of Monte Calvario, Auronzo di Cadore . ARCHAEOMETRY, vol. 47, p. 341-349, ISSN:
0003-813X
64) BRUNELLI K, DABALA' M., CALLIARI I, MAGRINI M (2005). Effect of HCl pretreatment on corrosion resistance of cerium based conversion coating on magnesium and
magnesium alloys . CORROSION SCIENCE, vol. 47, p. 989-1000, ISSN: 0010-938X, doi:
10.1016/j.corsci.2004.06.016
65) E. GIANOTTI, I.CALLIARI, M. ZANESCO, RAMOUS E. (2005). Oxydation intercristalline
lors de la cementation gazeouse avec endogaz, . TRAITEMENT THERMIQUE, vol. 367, p.
29-34, ISSN: 0041-0950
66) CALLIARI I., M. MAGRINI, E. RAMOUS (2005). Measurements of Secondary Phases
Conten in a 22Cr5Ni Duplex Stainless Steel . PRAKTISCHE METALLOGRAPHIE, vol. 42,
p. 74-88, ISSN: 0032-678X
67) I. CALLIARI, ZANESCO, M., RAMOUS E. (2004). Precipitazione di fasi secondarie in un
acciaio duplex 2205 trattato isotermicamente (Precipitation of secondary phases of 2205
duplex stainless steel after isothermal. METALLURGIA ITALIANA, vol. 96, p. 41-45,
ISSN: 0026-0843
68) G.M. INGO, E. ANGELINI, T. DE CARO, CALLIARI I. (2004). Combined use of GDOES,
SEM + EDS, XRD and OM for the microchemical study of the corrosion products on
archaeological bronzes. APPLIED PHYSICS. A, MATERIALS SCIENCE & PROCESSING,
vol. 79, p. 199-203, ISSN: 0947-8396, doi: 10.1007/s00339-004-2533-1
69) BALDINI C, BUSON S, CALLIARI I, MAGRINI M., RUTA A, VARIOLA A (2004).
STUDIO ARCHEOMETALLURGICO DI FIBULE ATESTINE . QUADERNI DI
ARCHEOLOGIA DEL VENETO, vol. XX, p. 198-204, ISSN: 1120-9224
70) I. CALLIARI, RAMOUS E., K. BRUNELLI, M. DABALA', P. FAVARON (2004).
Characterization of Vacuum Brazed Joints for Superconducting Cavities . MIKROCHIMICA
ACTA, vol. 147, p. 141-146, ISSN: 0026-3672, doi: 10.1007/s00604-004-0183-9
71) DABALA' M., CALLIARI I., VARIOLA A. (2004). Corrosion Behaviour of a Superduplex
Stainless Steel in Chloride Aqueous Solution . JOURNAL OF MATERIALS
ENGINEERING AND PERFORMANCE, vol. 13, p. 237-240, ISSN: 1059-9495, doi:
10.1361/10599490418316
72) L. BATTEZZATI, I. MOIRAGHI, CALLIARI I., M.DABALA' (2004). Hardening phases in
some Ni-free 14 carat white gold alloys . INTERMETALLICS, vol. 12, p. 327-332, ISSN:
0966-9795, doi: 10.1016/j.intermet.2003.11.003
73) ZAGHIS F., MOLIN G., SALVIULO G., CALLIARI I., RAMOUS E., GANGEMI G.
(2003). Metallic finds from the Venetic site of M.Calvario, Auronzo di Cadore: a preliminary
archaeometric study . In: Associazione Italiana di Metallurgia. Archeometallurgy in Europe,
24-25-26 September 2003, Milan, Italy: Proceedings, Vol. 2. vol. 2, p. 167-174,
Milano:Associazione italiana di metallurgia, 2003, ISBN: 8885298508
74) G.SERGI, BERTANI R., I.CALLIARI, L.LUPOLI, A.BERTON, S.VOLPATO, G.ENZI
(2003). Total body water and extracellular water measurements through in vivo dilution of
D2O and bromide as tracers . SPECTROSCOPY, vol. 17, p. 603-611, ISSN: 0887-6703
75) SERGI G, LUPOLI L, BUSETTO L., VOLPATO S, COIN A, BERTANI R, CALLIARI I,
BERTON A, ENZI G (2003). Changes in fluid compartments and body composition in obese
women after weight loss induced by gastric banding. . ANNALS OF NUTRITION AND
METABOLISM, vol. 47, p. 152-157, ISSN: 0250-6807, doi: 10.1159/000070038
76) CALLIARI I., DABALA' M., MAGRINI M., MARTINI R., VAIJNA E. (2003). Augustan
Tresviral coinage of Rome mint: central, auxiliary and imitation coins from Moesia-Thracia
area: preliminary results . In: -. Archaeometallurgy in Europe. milano, 24-26 September 2003,
vol. 2, p. 221-228, ISBN: 8885298508
77) - CALLIARI I., M. MAGRINI, F. PIASENTINI, E. RAMOUS (2002). Measurements of
secondary phases content in duplex stainless steel 2205,. In: 11 Internationalen
,Metallographie Tagung Leoben. p. 235-242, -, leoben, settembre 2001
78) E.ANGELINI, G.BULDRINI, CALLIARI I., M.DABALA, T.DE CARO, S.GRASSINI,
G.M.INGO, F.ROSALBINO (2002). Microchemical and microstructural characterization of
the corrosion products of copper and bronze artefacts ,as Roman mirrors, and of gilded
Middle Ages objects . In: VIGATO P.A.. The Science of Art. p. 161-172, PADOVA:Libreria
Progetto
79) M.DABAL, M.MAGRINI, CALLIARI I., E.RAMOUS (2002). 14Kt white gold alloyed with
Cr and Mn . In: -. Design and technology for the modern jewellery,Vicenza,Italy. Vicenza, p.
1-7, Ed.AIM-AIFM Milano
80) - CALLIARI I., DABALA' M., MAGRINI M., VARIOLA A. (2002). Caratterizzazione di
due leghe a base Au-Pd per impieghi dentali . In: -. 29° CONVEGNO NAZIONALE AIM,.
Modena, 13-15 novembre 2002, vol. CD, paper 65, p. 125, Milano:AIM - Associazione
Italiana di Metallurgia, ISBN: 888529846X
81) - M. DABALA', BRUNELLI K., CALLIARI I., MAGRINI M. (2002). A cerium-based
conversion coating for magnesium and magnesium alloys . In: -. 15TH INTERNATIONAL
CORROSION CONGRESS Granada. granada (spain) 22-27 september 2002, vol. CD paper
198
82) G.MELOTTI, L.PAZIENZA, I.CALLIARI, M.DABALA', RAMOUS E. (2002). Develpment
of high-strenght and corrosion resistant martensitic stainless steel . In: -. 4TH EUROPEAN
STAINLESS STEEL 1. parigi, 10-13 june 2002, vol. c2-3, p. 150-154, Parigi:83) 2002 G. M. INGO, E. ANGELINI, G. BULTRINI, CALLIARI I., M. DABALA', T. DE CARO
(2002). Study of long-term corrosion layers grown on high-tin leaded bronzes by means of the
combined use of GDOES and SEM + EDS . SURFACE AND INTERFACE ANALYSIS,
vol. 34, p. 337-342, ISSN: 0142-2421, doi: 10.1002/sia.1312
84) 2002)
G. M. INGO, E. ANGELINI, CALLIARI I., M. DABALA', T.DE CARO (2002). Combined
use of GDOES and SEM + EDS for the microchemical study of oxide layers grown at high
temperature on Nimonic 80 A nickel-based superalloy, . In: Marcus P.,Galtayries A.,Watts
J.F.. Proceedings of the 9th European Conference on Applications of Suface and Interface
Analysis;. vol. 34, p. 507-513, doi: 10.1002/sia.1349
85) 2001 M.DABALA', L.ARMELAO, A.BUCHBERGER, CALLIARI I. (2001). Cerium based
conversion layers on aluminum alloys,. APPLIED SURFACE SCIENCE, vol. 172, p. 312322, ISSN: 0169-4332, doi: 10.1016/S0169-4332(00)00873-4
86) 2001
CALLIARI I., A.VARIOLA (2001). Characterization and corrosion properties of
electroformed AuCu+B4C. In: EUROMAT 2001. vol. CD, paper 637, MILANO:AIM, ISBN:
8885298397, rimini, luglio 2001
87) 2001 G.M.INGO, E.ANGELINI, G.BULTRINI, CALLIARI I., M.DABALA', T.DECARO (2001).
Microchemical Investigation on corrosion layers grown on high tin leaded bronzes by means
of the combined use of GDOES and SEM-EDS. In: Sci.Tech.for the safeguard of cultural
heritage in the Mediterranean Basin. vol. 1, CNR, ISBN: 8481384534
88) 2001 BRUNELLI K, DABALA' M, FRATTINI R, SANDONA' G., CALLIARI I (2001).
Electrochemical behaviour of Cu-Zr and Cu-Ti glassy alloys . JOURNAL OF ALLOYS AND
COMPOUNDS, vol. 317-318, p. 595-602, ISSN: 0925-8388, doi: 10.1016/S09258388(00)01394-3
89) 2001 MELOTTI G., PAZIENZA L., CALLIARI I., DABALA' M. (2001). Martensitic stainless
steel assessment for application in automotive, fasteners and food processing. In: -.
EUROMAT 2001,. 10-15 June, vol. CD,paper 38, p. paper n° 638, MILANO:AIM, ISBN:
8885298397
90) 2001 G.MELOTTI, E.RAMOUS, CALLIARI I., K.BEGGIO (2001). Heat treatment of Ni-Mo
martensitic stainless steels. In: Heat treatment . p. 271-276, Milano:AIM - Associazione
Italiana di Metallurgia, rimini, giugno
91) 2001 CALLIARI I., DABALA' M., BRUNELLI K. (2001). Characterization of a NiCrAlY coating
on single crystal superalloy . In: -. PROCEEDING OF 2ND EUROPEAN CONGRESS ON
"HEAT AND SURFACE TREATMENT",. salsomaggiore, vol. 1, p. 17-24
92) 2001
DABALA' M., CALLIARI I., MAGRINI M. (2001). Microstructure and corrosion resistance
of cerium–based chemical conversion coatings on AA5083 aluminum alloy, . In: -.
EUROCORR 2001 CONFERENCE. riva del garda, September-october 2001, vol. CD paper
120, p. paper n°120, Milano:Associazione Italiana di Metallurgia, ISBN: 8885298419
93) 2001 BATTEZZATI L., BARICCO M., BARBERO S., ZAMBON A., CALLIARI I., VARIOLA
A., BOZZINI B., CAVALLOTTI P.L., GIOVANNELLI G., NATALI S. (2001).
Elettrodeposizione di leghe Au-Cu:strutture, stabilità termica e caratteristiche meccaniche, .
METALLURGIA ITALIANA, vol. 93, p. 17-24, ISSN: 0026-0843
94) 2001 CALLIARI I., DABALA' M., BRUNORO G., INGO G. M. (2001). Advanced surface
techniques for characterization of Cu-base artefacts . JOURNAL OF RADIOANALYTICAL
AND NUCLEAR CHEMISTRY, vol. 27,3, p. 601-608, ISSN: 0236-5731, doi:
10.1023/A:1010663417536
95) 2001 CALLIARI I., CANAL E., CAVAZZONI S., LAZZARINI L. (2001). Roman bricks from the
lagoon of Venice : a chemical characterization with multivariate analysis . JOURNAL OF
CULTURAL HERITAGE, vol. 2, p. 23-29, ISSN: 1296-2074, doi: 10.1016/S12962074(01)01110-4
96) 2001
CALLIARI I., MAGRINI M., RAMOUS E., BUSON S., RUTA A. (2001).
Archaeometallurgical study of paleovenetian fibulae . In: Jesús Alpuente, Irene de
Bustamante, Óscar García, Pablo L. López, Alfonso Marcos, Javier de Pedro y Juana Sanz . 3
rd Int. Cong. Sc. Tech. for safeguard of cultaral heritage in Mediterran basin. Alcalà, Alcala
de henares 9-14 july 2001, vol. Cd paper884, alcalà:Universidad de Alcalá & Consiglio
Nazionale delle Ricerche, ISBN: 8481384534
97) 2001 I. Calliari, M. Dabalà, A. Zambon (2001). Microstructural Characterization of a Pt-Aluminide
Coated IN738LC. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,
vol. 10, p. 258-262, ISSN: 1059-9495, doi: 10.1361/105994901770344962
98) 2000 CALLIARI I., M.DABALA'. M.PENASA (2000). PULSED NDY.A.G.Laser Welding of
MMC's,. ADVANCED ENGINEERING MATERIALS, vol. 2,10, p. 653-656, ISSN: 14381656, doi: 10.1002/1527-2648(200010)2:10<653::AID-ADEM653>3.0.CO;2-Q
99) 2000 S.BARISON, S.DAOLIO, M.FABRIZIO, C.PICCIRILLO, CALLIARI I., L.ARMELAO
(2000). Characterisation of Dispersion Hardened Gold Composites. Part1: SIMS and SEM
study of powder inclusions,. CHEMISTRY OF MATERIALS, vol. 12, p. 4964-4970, ISSN:
0897-4756, doi: 10.1021/cm001051y
100)2000 E.RAMOUS, CALLIARI I., E.NOCERINO, P.GASPARELLA (2000). High temperature
influence on microstructure of duplex stainless steel,. In: Duplex 2000. p. 425-430,
Milano:AIM - Associazione Italiana di Metallurgia, venezia, settembre 2000
101)2000 INGO G. M., CALLIARI I., DABALA' M., BULTRINI G., DE CARO T., CHIOZZINI G.
(2000). Microchemical Study of the Corrosion products on ancient Bronzes by means of
Glow Discharge Optical Emission Spectrometry . SURFACE AND INTERFACE
ANALYSIS, vol. 30, p. 264-268, ISSN: 0142-2421, doi: 10.1002/10969918(200008)30:1<264::AID-SIA831>3.0.CO;2-L
102)2000
CALLIARI I., M. DABALA', MAGRINI M. (2000). EDXRS analysis of Dental Alloys . XRAY SPECTROMETRY, vol. 29, p. 438-442, ISSN: 0049-8246, doi: 10.1002/10974539(200011/12)29:6<438::AID-XRS450>3.0.CO;2-0