Bibliografia
Capitolo 1
A. De Paulis, E. Manfredi, Lezioni di Costruzione di macchine di Lucio Lazzarino, PLUS, 2004.
G. Medri, Cenni di progettazione di prodotto, Liguori, 2008.
K.T. Ulrich, K. Eppinger, Lo sviluppo del prodotto, McGraw Hill, 2001.
R. Nordmann, H. Birkhofer, Elementi di macchine e meccatronica: progettazione dei sistemi tecnici, McGraw-Hill,
2006.
K. Pahl, W. Beitz, Konstruktionslehre (Engineering Design), Springer, 1995.
S. Pugh, Total design, Addison-Wesley, 1991.
P.L. Hurricks, Handbook of electromechanical product design, Longman, 1994.
C. Ehrlenspiel et al., Cost-efficient design, Springer-ASME, 2007.
D.G. Ulmann, The mechanical design process, McGraw-Hill, 1992.
M.S. Phadke, Quality Engineering using Robust Design, Prentice Hall, 1989.
Linee guida (Richtlinien) VDI 2225 e VDI 2206, Verein Deutscher Ingenieure, Ed. Beuth, 2006.
Capitolo 2
G. Belloni, A. Lo Conte, Costruzione di macchine: resistenza dei materiali e sicurezza, Hoepli, 2002.
L. Vergani, P.M. Davoli et al., Comportamento meccanico dei materiali, McGraw-Hill, 2005.
N.E. Dowling, Mechanical behavior of materials, 3rd ed., Pearson-Prentice, 2007.
J.A. Collins, Failure of materials in mechanical design, 2nd ed., Wiley, 1993.
R.W. Hertzberg, Deformation and fracture mechanics of engineering materials, 3rd ed., Wiley, 1989.
G.E. Dieter, Mechanical metallurgy, 3rd ed., McGraw Hill, 1986.
G. Eckold, Design and manufacture of composite structures, Woodhead, 1994.
R.M. Jones, Mechanics of composite materials, McGraw Hill, 1975.
M. Schwartz, Encyclopedia of smart materials, Wiley, 2001.
M.F. Ashby, Materials selection in mechanical design, 4a ed., Elsevier, 2010.
2 Bibliografia
K. Ehrlenspiel et al., Cost-efficient design, Springer-ASME, 2007.
AA.VV., Metals handbook, ASM International, 2007.
AA.VV., Engineered materials handbook, ASM International, 1995.
Capitolo 3
G. Faraudo, Critica economica del progetto meccanico, 3 vol., Ed. Rivista di Meccanica, 1965.
K. Ehrlenspiel et al., Cost-efficient design, ASME Press, 2007.
J.G. Bralla (coord.) Design for manufacturability handbook, 2a ed., McGraw-Hill, 1999.
G. Boothroyd, P. Dewhurst, Product design for assembly, Wakefield, 1989.
M.M. Andreasen et al., Design for assembly, 2a ed., Springer, 1988.
Capitolo 4
G. Belloni, A. Lo Conte, Costruzione di macchine: resistenza dei materiali e sicurezza, Hoepli, 2002.
V.I. Feodosev, Resistenza dei materiali, Editori Riuniti, 1977.
A.D.S. Carter, Mechanical reliability and design, Mc Millan, 1997.
R.M. Jones, Mechanics of composite materials, 2nd ed., Taylor & Francis, 1999.
R.W. Hertzberger, Deformation and fracture mechanics of engineering materials, 4th ed., Wiley, 1996.
D. Broek, The practical use of Fracture Mechanics, Kluwer, 1988.
J.T. Boyle, J. Spence, Stress analysis for creep, Butterworths, 1983.
Capitolo 5
R. Bassani, Elementi di tribologia, SEU Pisa, 1993.
G. Strafellini, Attrito e usura, Tecniche Nuove, 2005.
B. Atzori, Appunti di costruzione di macchine, Cortina, 2001.
N.E. Dowling, Mechanical behavior of materials, 3a ed., Pearson Prentice Hall, 2007.
J. L. Bannantine et al., Fundamentals of metal fatigue analysis, Prentice Hall, 1990.
D. Radaj, Design analysis of fatigue resistant welded structures, Springer, 1990.
S.S. Manson, G.R. Halford, Fatigue and durability of structural materials, ASM, 2006.
D. Broek, The practical use of fracture mechanics, Kluwer, 1988.
http://afgrow.org (software per la nucleazione e propagazione di fessure).
Capitolo 6
Istituto Italiano della Saldatura, Saldatura per fusione, 2 vol., Hoepli, Milano 1995.
J. Shields, Adhesive Bonding - Engineering Design Guide, Oxford University Press.
AA. VV. Engineering Adhesives, Machine Design, Penton/IPC.
Capitolo 7
VDI Richtlinie 2230 - Collegamenti con bulloni.
J.H. Bickford, An Introduction to the Design and Behavior of Bolted Joints, M. Dekker, 1995.
Bibliografia 3
H. Wiegand, K.H. Kloos, W. Thomala, Schrauben-Verbindungen, Springer-Verlag 1988.
F.G. Kollmann, Welle-Nabe-Verbindungen, Springer-Verlag 1988.
V. Dobrovolski, K. Zablonski, S. Mak, A. Radtchick, L. Erlikh, Éléments des machines, Mir, 1971.
Capitolo 8
Engineering Guide to Spring Design, Associated Spring Corporation.
A. Wahl, Mechanical Spring, McGraw-Hill.
E. Zahavi, D. Barlam, Nonlinear Problems in Machine Design, CRC Press.
Capitolo 9
R. Bassani, B. Picigallo, Hydrostatic Lubrication, Elsevier.
P. Eschmann, L. Hasbargen, K. Weigand, Ball and Roller Bearing, R. Oldenbourg Verlag, J. Wiley & Sons.
T. A. Harris, Rolling Bearing Analysis, J. Wiley & Sons.
E. Mayer, Mechanical Seals, Newnes-Butterworths, Londra, Boston.
R.D. Arnell, P.B. Davies, J. Halling, T.L. Whomes, Tribology, Principles and Design Applications, McMillan,
Londra.
D. Dowson, G. R. Higginson, Elasto-hydrodinamic lubrication, Pergamon Press, London.
J. Halling, Introduction to Tribology, Wykeham Pubblications, London.
B. Jakobson, L. Floberg, Trans. Chalmers Univ. of Tech., No. 3. 1957.
B. Jakobson, L. Floberg, Trans. Chalmers Univ. of Tech., No. 5, 1958.
ESDU, General Guide to the Choice of Journal Bearing Type, Item No. 65007 (1965), London.
ESDU, General Guide to the Choice of Thrust Bearing Type, Item No. 67033 (1967), London.
ESDU, Calculation Methods for Steadily Loaded Axial Groove Hydrodynamic Journal Bearings, Item No. 84031
(1984), London.
ESDU, Selection of Alloys for Hydrodynamic Bearings, Item No. 88018 (1988), London.
A.A. Raimondi, J. Boyd, Applying Bearing Theory to the Analysis and Design of Journal Bearing, Part I e II, J.
Appl. Mechanics, vol. 73, 1951, pp. 298-316.
A.A. Raimondi, J. Boyd, A Solution for the Finite Journal Bearing and Its Application to Analysis and Design,
Part I, II e III, Trans. ASLE, vol. 1, n. 1, in Lubrication Science and Technology, Pergamon, New York, 1958,
pp. 159-209.
D. Dowson, P. J. Hamrock, Ball Bearing Mechanics, NASA Tech. Rep. NTRS 2009-12-18.
Cataloghi e Riviste, SKF, FAG, TIMKEN, SNR.
Capitolo 11
F. Schmelz, H-Ch. Graf v. Seherr-Thoss, E. Aucktor, Gelenke und Gelenkenwellen, Springer-Verlag.
M. Neale, P. Needham, R. Horrel, Coupling and Shaft Alignment, Mechanical Engineering Pubblications, Londra.
G. Bongiovanni, G. Roccati, Giunti fissi, articolati e di sicurezza, Levrotto e Bella, Torino.
E. Zagatti, Giunti: Criteri di scelta e proporzionamento, Tecniche Nuove, Milano.
J. Pietrowski, Shaft Alignment Handbook, CRC Press.
4 Bibliografia
Capitolo 12
G. Niemann, H. Winter, Elementi di macchine, voll. II e III, EST Springer, 1986.
G. Henriot, Ingranaggi: trattato teorico e pratico, 2a ed., Tecniche nuove, 1987.
G. Ruggeri, P. Righettini, Ruote dentate con spostamento del profilo, McGraw-Hill, 2003.
E. Buckingham, Analytical mechanics of gears, McGraw-Hill, 1949.
D.P. Townsend (coord.), Dudley’s Gear handbook, 2nd ed., McGraw-Hill, 1991.
R.J. Drago, Fundamentals of gear design, Missouri publ., 1982.
Anon., Norma ISO 6336, Calculation of load capacity of spur and helical gears, 2006.
Anon., Norme UNI 6773-74, UNI 4760-75, UNI 8862-87.
Anon., Norma AGMA 2101-C95, Fundamentals rating factors and calculation methods for involute spur
and helical gear teeth, 1995.
Anon., Design guidelines for aerospace gearing, AGMA Info Sheet 911 A94, 1994.
Capitolo 13
G. Niemann et al., Elementi di macchine, 3° volume, EST-Springer, 1986.
D. Marocchi, Trasporti a fune, Levrotto e Bella, 1992.
V. Zignoli, Trasporti meccanici, Hoepli, 1953.
M. Cicognani, Trasmissioni con cinghia, Hoepli, 1990.
A. Pessina, Manuale delle cinghie di trasmissione, Tecniche Nuove, 1994.
W.D. Erickson (coord.), Belt selection and applications, Dekker, 1987.
AA.VV., Chain for power transmission and materials handling, Dekker, 1982.
Anon., Norme ISO 2408, 4101, 4344, 4346, 12076 (funi metalliche).
Anon., Norme ISO 22, 5291, 5292, 5294, 5295, 5296 (cinghie).
Anon., Norme ISO 606, 10190, ISO 10823 (catene a rulli).
Capitolo 14
G. Bongiovanni, G. Roccati, Innesti, Levrotto e Bella, 1987.
G. Bongiovanni, G. Roccati, Freni, Levrotto e Bella, 1989.
G. Niemann et al., Elementi di macchine, 3o volume, EST-Springer, 1986.
W.C. Orthwein, Clutches and brakes, Dekker, 1985.
AA.VV., Manuale dei freni, Brembo, 1997.
A.K. Baker, Vehicle braking, Penthec Press, 1986.
N.S. Currey, Aircraft landing gear design, AIAA, 1988.