PIEFFE PROY75D
CARATTERISTICHE
DELL’ELASTOMERO
PROPERTIES
NORMA
ASTM/ISO/DIN
UNITA’ DI
MISURA
MEASUREMENT
UNIT
VALORE
VALUE
DUREZZA
HARDNESS
ASTM D-2240
Sh A/D
77
Sh A
MODULO IN FLESSIONE
FLEX MODULUS
ASTM D-790
Mpa
1,31
RESISTENZA A FLESSIONE
FLEX STRENGTH
ASTM D-790
Mpa
51
CARICO A ROTTURA
TENSILE STRENGTH
ASTM D-638
Tirato a 5.1 mm/min
Pulled at 0.2 in /min
Mpa
40
ALLUNGAMENTO A ROTTURA
ELONGATION AT BREAK
ASTM D-638
Tirato a 5.1 mm/min
Pulled at 0.2 in /min
%
25
ASTM D-648
Carico: 264 psi
264 psi load
°C
90
RESISTENZA ALL’
IMPATTO con intaglio
IZOD (notched)
ASTM D-256
20°C
-40°C
J/m
43
37
RESISTENZA ALL’
IMPATTO senza intaglio
IZOD
(unnotched)
ASTM D-256
20°C
-40°C
J/m
968
740
PESO SPECIFICO
SPECIFIC GRAVITY
ASTM D-792
Gr/cm³
TEMPERATURA DI
DEFORMAZIONE A CALDO
HEAT DEFLECTION
TEMPERATURE
1,13
All statements, technical information and recommendations contained in this database are presented in good faith, based upon
tests believed to be reliable and practical field experience. The reader is cautioned, however, that PIEFFE srl cannot guarantee the
accuracy or completeness of this information, and it is the customer's responsibility to determine the suitability of PIEFFE srl
products in any given application.