QSC
• CPU 80C188 @20Mhz
• Redundant configuration
• Analog-digital configurable I/O
whith standard IOBUS s.d.i.
PROCESS INTERFACES
• Field I/O connection with CPU
based I/O boards
• Rack 19” 6U
• Up to 3 expansion racks
D
E
S
C
R
I
P
T
I
O
N
QSC is a modular device for the management of I/O analog and/or
digital signals.
QSC transmit the data to a local PC locale or to a remote centre using
a TCP/IP LAN or an external modem. The RS485 line allows the
connection in multi-drop configuration of up to 16 QSC devices.
Power supply
T
E
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
ALS
Power supply board AC/DC converter.
BUS
IOBUSM
High speed parallel bus that connect CPU board to I/O boards.
CPU
QSC
80C188 based CPU board. 4 on-board serial lines for communication
purposes.
I/O boards
ITS
ITO
ITM
ITR
ISER
Rack
Environment
32 digital input optoinsulated
16 digital output
8 analog input
8 analog output
Up to 4 serial lines RS232/RS485
Alluminium rack 19”
Operating
Temp.
Strage
Temp.
Op. relative
humidity
-10 ÷ 60° C
-20 ÷ 70° C
10 ÷ 95 % non condensing
IPRO – 041-00
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
QSC
PROCESS INTERFACES
D
E
S
C
R
I
P
T
I
O
N
T
E
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
• 80C188 @20Mhz microprocessor
• Ram with battery and calendar clock
• s.d.i. bus controller and redundant
system management
• watch-dog function and bus
arbitration control
• 4 serial interface lines
• 1 serial diagnostic line for local use
• 1 EtherNet interface
QSC is a s.d.i. control board used in STAR systems for I/O board
monitoring and control.
QSC can be supplied with Ethernet connection.
Microprocessor
FLASH Memory
RAM Memory
Ram battery back-up
Watch-dog function
Calendar clock funztion
Master-slave management
Bus arbitration
Serial interfaces
EtherNet interface
Monitor e diagnostic interface
Fast communication channel for redundant
ISC
80C188 @20Mhz
Up to 1Mbyte
Up to 1,5Mbyte
Lithium battery (3 years data retention)
Integrated
Integrated with battery back-up
Integrated
Integrated
n.3 line RS232
n.1 configurabile line RS232/RS485
n.1 line RS232 (local PC – alternative EtherNet
interface)
Integrate (on front panel)
Asyn. RS232
Asyn. 1Mbps (TTL)
Power supply
+5V ±5%
Power
Operating temperature
Storage temperature
Operatine relative humidity
1,5W max
-10° ÷ 60°C
-20° ÷ 70°C
10 ÷ 90% non condensing
Size
Double EUROCARD Standard 160 x 233mm
Width
8E
IPRO – 054-00
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
ITS
• Microprocessor based board providing 16
high insulation and high disturbance
rejection digital input; 2 of the signals
can be used as pulse counters
• Voltage driven input signal from 10Vcc to
125Vcc
PROCESS INTERFACES
• Input integrity automatic diagnostic
D
E
S
C
R
I
P
T
I
O
N
ITS board provides16 insulated digital input.
Each input can be individually configured, also on the field, setting the proper range of
input voltage. Two of the 16 input (no. 1 and no. 8) can be configured as pulse counters.
ITS is managed by a microprocessor that is used also for the periodical control of
electrical integrity of each input optocoupler.
Galvanic insulation
Input signal
Input voltage range
Input current range.
Input differential overvoltage protection
T
E
C
H
N
I
C
A
L
Input common mode overvoltage
rejection
Dielectric strenght between input and
board digital circuits
Power supply
Operating temperature
Storage temperature
Operating relative humidity
Size
Width
Terminal block
Between input signals and board’s digital circuits.
Voltage driven
From 10Vcc to 125Vcc
7÷12 mA
Fast transient 5/50 ns 1KVp
pulse 1.2/50 μs 1KVp
Fast transient 5/50 ns 1KVp
pulse 1.2/50 μs 1KVp
1500 Vrms for 1 minute
± 2000 V peak
+ 5V ± 5% 50 mA max
-10° ÷ 60°C
-25° ÷ 85°C
10 ÷ 90% not condensing
Standard DOPPIO EUROCARD 160*233 mm
8E
DIN rail or back panel types available
S
P
E
C
I
F
I
C
A
T
I
O
N
S
IPRO-0056
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
ITO
•
Microprocessor based board providing 16
high insulation and high noise rejection
solid state relays digital output
• Current limit control for each output
• Automatic diagnostic integrity test for
each output solid state relays.
PROCESS INTERFACES
D
E
S
C
R
I
P
T
I
O
N
ITO board provides 16 microprocessor controlled digital outputs, based on medium
power optocoupled solid state relays. Each digital output switches both the positive and
negative power rails.
Before command execution, each solid state relay is tested, besides the digital output
current is hardware limited, and monitored by an analog/digital converter.
In order to increase output driver capability , ITO can be coupled to a module with 16
high power electromechanical relays.
Insulation
Outputs
T
E
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
Output range
Output differential overvoltage
protection
Output common mode overvoltage
protection
Dielectric strenght
Power supply
Operatine temperature
Storage temperature
Operatine relative humidity
Size
Width
Related terminal block
Between outputs and logic circuits
16 double solid state relay with current limited and
Integrità control
Max 60V max 200mA (limited)
Fast transient 5/50 ns 1KVp
Surge 1.2/50 μs 1KVp
Fast transient 5/50 ns 1KVp
surge 1.2/50 μs 1KVp
1500 Vrms
+ 5V ± 5% 50 mA max
-10° ÷ 60°C
-25° ÷ 85°C
10 ÷ 90% not condensing
Double EUROCARD 160*233 mm
8E
DIN rail or back panel types available
High power relay module (RSM16)
Contact arrangement
Contact rating ac
Contact rating dc
Dielectric strenght
16 SPDT
10 A@250Vac
10A @ 30Vdc 0,3A @ 110Vdc
0,12A @ 220V
1500Vrms
IPRO-0057
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
ITM
• Microprocessor based board providing 8
high insulation and high disturbance
rejection analog input.
• 16 bit converter for each channel
Each input individually configurable:
providing the choice among voltage,
current or resistance driven signals.
• High common mode and normal mode
rejection ratio
PROCESS INTERFACES
•
D
E
S
C
R
I
P
T
I
O
N
ITM board provides 8 insulated analog input, each one based over a 16 bit A/D
converter, with high stability and very high disturbance rejection ratio.
Each channel can be individually configured, also on the field, allowing the acquisition of
low or high voltage level signals, current driven signals, thermocouples or thermoresistance signals.
ITM board is managed by a microprocessor. An external terminal block is required.
Galvanic insulation
Input signal
Input voltage range
Input current range
Input (Ohm) from RTD
Input overvoltage differential protection
T
E
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
Input overvoltage common mode
rejection
Dielectric strenght between input and
board digital circuits
Between input signals and between input signals and
board’s digital circuits.
Unipolar or bipolar voltage or current driven
From ± 20 mV to ± 10 V
0÷20 mA
3 or 4 wires PT100, NI100, Ni120
Fast transient 5/50 ns 1KVp
pulse 1.2/50 μs 1KVp
Fast transient 5/50 ns 1KVp
impulse 1.2/50 μs 1KVp
1500 Vrms for 1 minute
± 2000 V peak
1000 Vrms for 1 minute
± 1500 V peak
Dielectric strenght between inputs.
Common mode rejection 50 Hz
Common mode rejection in DC
Normal mode rejection
Accuracy
A/D conversion
Scanning speed.
Power supply
Operating temperature
Storage temperature
Operating relative humidity
Size
Width
Terminal block
Tip ≥ 130 db at 230 Vrms (1)
Tip ≥ 140 db at 400 V (1)
tipical ≥ 80 db @50 Hz
Better than 0.05% of measure range (1)
16 bit sigma-delta
8 channels per second
+ 5V ± 5% 50 mA max
-10° ÷ 60°C
-25° ÷ 85°C
10 ÷ 90% not condensing
Standard DOUBLE EUROCARD 160*233 mm
8E
To be ordered separately accordingly to installed signal
types.
Pin-out as terminal block of ADA boards.
(1) Measured during tests conforming to ANSI MC8.1 – 1975 normative
IPRO-0055
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
ITR
PROCESS INTERFACES
• Microprocessor based board providing 8
high insulated 12 bit analog output
• Output are configurable providing the
choice between voltage or current driven
outputs
• 12 bit D/A converter
• Accuracy better than 0,25%
D
E
S
C
R
I
P
T
I
O
N
T
E
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
ITR board provides 8 insulated 12bit converted, voltage or current
driven, analog output. ITR board is managed by a microprocessor. An
external terminal block is required.
Galvanic insulation
Output signal
Between output signals and board’s digital circuits.
Unipolar or bipolar voltage or current driven
Output voltage range
0÷5 V ; 0÷10 V
± 2,5 V - ± 5 V - ± 10 V
Output current range
4÷20 mA
Output impedance
Max. load capacity
Accuracy
Output protection
1 ohm
0.5 μF
0.25%
Short circuit proof
+5 V ± 5% 250 mA max
±15 V 150 mA max
1,25W (+5V)
7W (+5V) with output on board power supply
2,25W (±15V)
-10° ÷ 60°C
-25° ÷ 85°C
10 ÷ 90% non condensing
Standard double EUROCARD 160 x 233 mm.
8E
Power Supply
Energy absorption
Operating temperature
Storage temperature
Operating relative humidity
Size
Width
IPRO – 021-00
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
PROCESS INTERFACES
ISER
D
D
E
E
S
S
C
C
R
R
II
P
P
T
I
O
N
T
EC
CA
HR
NA
IT
CT
AE
LR
I
SS
PT
EI
CC
IH
FE
I
CT
AE
TC
IN
OI
NC
SH
E
•
80C188 microprocessor up to 20Mhz
•
2 RS232 serial interface
•
2 RS232/RS485 serial interface
•
Low power technology
•
MODBUS (RTU master)
protocol standard
ISER is a microprocessor board that manages
4 serial interfaces RS232/RS485 (configurable)
Memory
SBX Connectors
Segnalazioni
Configuration
Serial Interfaces
Serial Interfaces
Communicaton Protocol
Power supply
Operating temperature
Storage temperature
Relative humidity ( operating)
Size
Width
2 slots byte-wide for static RAM (max 512 KB),
EPROM or Flash EPROM (max 256 KB)
1
4 leds (1 watch dog, 3 diagnostic)
Using front panel switch with 10 positions
2 RS232
2 RS485/232
MODBUS -RTU binary – master mode
+ 5 V ± 10% 250 mA max
-10° ÷ 50°C
-20° ÷ 70°C
10 ÷ 90% non condensing
Standard doppio EUROCARD 160 x 233 mm
8E
IPRO – 030-00
(20090) Trezzano s/n (Mi)
Via Edison, 10 Trezzano s/n (Mi)
tel. 0248486.1 fax 0248486248
www.sdiautomazione.it
(56125) Pisa
Lungarno guadalongo, 4
tel. 050500004 fax 050500122
e-mail: [email protected]
automazione industriale
Scarica

PROCESS INTERFACES - sdi automazione industriale