BEST receiver experience: general architecture, design and integration Federico Perini, Germano Bianchi, Marco Schiaffino, Jader Monari INAF-IRA (I) BEST-2 Front-End BEST-3lo Front-End NF=1.35dB@180MHz, Tn=105K@180MHz Gain=50dB OIP3= +25 dBm Good repeatability! NF=0.45dB Tn=32K Gain=60dB BW=16MHz@408MHz OIP3>+33dBm Input RL>15dB Output RL>15dB Power Supply=10-15Volt@=245mA BEST-2 receivers box BEST-2 408MHz 1 Front-End and 1 Optical Transmitter mounted inside a waterproof box. Best-2 Opt. Tx. assembly Opt. Tx. FM Band stop filter Low pass (TV stop) Switchable filter bank: - 110-250MHz - 130-160 MHz -170-210MHz - 200-240MHz - 110-150MHz - 140-180MHz - 200-225MHz - 210- 250MHz BEST-3lo receivers box BEST-3lo 120-240MHz A 3U / 42Hp subrack equipped with 2 Optical Tx, 2 F.E., 1 uC board and 1 power supply board) mounted inside a waterproof box. Opt. Rx. =1310nm NF=36dB Gain=-25dB BW=(0.1-1)GHz, IIP3>+33dBm, Input RL>15dB Output RL>20dB, Power Supply=(12-15)Volt@75mA BEST-3lo Opt. Tx. assembly with anti-vibrations system BEST-2 IF+Rx subrack Optical fibre BEST-2 IF+Rx board BEST-3lo IF+Rx subrack LO distributor Optical fibre BEST-3lo Rx board IP3 products 10dB under the thermal noise level KTB IIP3 > -60dBm IF=30MHz, OL=378MHz Pin_ADCBW=-40/-30dBm (ADC Berkeley) PinKTB=-107dBm (Tb=20K) /-100dBm (Tb=500K) Gain=90dB, GainRX=35dB BEST-3lo RX IF Carrier Board Opt. Rx RF/IF=110-240MHz Gain=50dB, Dig. Att. 31.5/0.5dB OIP3>+38dBm