Contenitori
in vetroresina
per membrane
Fiberglass pressure
vessels for
membranes
Edizione 2008 - rev. 0
Contenitori per membrane - Membrane pressure vessels
PV WAVE
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
CONTENITORI IN VETRORESINA PER MEMBRANE
Fiberglass pressure vessels for membranes
INTRODUZIONE
Introduction
A completamento del proprio range di membrane Toray offre
una linea di contenitori (pressure vessels) per membrane di
elevata qualità.
Complementing the range of superior membrane products, Toray has
always been offering a line of high-quality membrane pressure housings
(pressure vessels) and accessories.
I prodotti offerti soddisfano tutte le possibili applicazioni delle
nostre membrane.
The supplied range covers all relevant applications of our membrane
products.
L’accurata selezione tra contenitori e accessori (vedere
anche capitolo giunti Victaulic) consente di eseguire avvii e
manutenzioni ottimali su tutti gli impianti a membrane.
The carefully selected, matching vessels and components (look the
Victaulic section couplings) make startup and operation of membrane
systems easy, straightforward and reliable:
PRODOTTI
Products
•
-
-
-
-
-
Contenitori per membrane 8”
attacchi frontali (front-port)
attacchi laterali (side-port)
attacchi multipli laterali (multi-port)
pressioni di esercizio: da 10 a 80 bar (da 150 a 1200 psi)
lunghezze: da 1 elemento a 7 elementi 40”
•
-
-
-
-
Contenitori per membrane 4”
attacchi frontali (front-port)
attacchi laterali (side-port)
pressioni di esercizio: da 21 a 70 bar (da 300 a 1000 psi)
lunghezze: da 1 elemento a 6 elementi 40”
•
-
-
-
-
-
8” membrane housings
front-ported
side-port ed
multiported
working pressure: from 10 to 80 bar (from 150 to 1200 psi)
length:from 1 to 7 elements for standard membrane length 40”.
•
-
-
-
-
4” membrane housings
front-ported
side-ported
working pressure: from 21 to 70 bar (from 300 a 1000 psi)
length: from 1 to 6 elements for standard membrane length 40”.
Benefits from PV WAVE membrane housings
I BENEFICI UTILIZZANDO PV WAVE
• Production certified for compliance with ASME X.
• Compliance with KTW (German standard for plastics in potable water)
certified.
• NSF 61 certificate available (starting Oct.2006).
• Easy intallation and maitenance
• Pressure vessels can be hot sanitizeb in pressureless state at 80° C for
two hours.
• Various connection styles for permeate ports available, adaptors for
membrane elements from all manufacturers.
• Produzione certificata in conformità con le norme ASME X
• Conformi e certificati con KTW (Certificazione in uso potabile di materiali plastici – Germania)
• Certificati NSF 61
• Facile installazione e manutenzione
• I contenitori possono essere sanitizzati a caldo a basse
pressioni (80°C per 2 ore)
• Diversi tipi di connessioni disponibili per l’uscita del
permeato
7
Contenitore 8’’
Pressure vessels 8’’
3
5
4
1
2
6
264
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
COMPONENTI PRINCIPALI
L’anello di tenuta (retaining ring) e facile da rimuovere
con il semplice utilizzo di una pinza.
Main components
Easy removal of the retaining ring, using only a small tool (eg.a pair of
pliers, Philips head screw driver).
1
2
3
Tutti i contenitori sono forniti con un disco di chiusura
in alluminio anodizzado 6061-T6 in accordo alla
normativa ASME SB-221.
Due fori filettati nella versione “side-port” aiutano nella
rimozione del disco.
Il tappo di chiusura, che comprende anche l’attacco
del permeato, è un pezzo unico ottenuto da un’unica
stampata.
Questa soluzione consente di ridurre il numero dei
componenti interni e ottimizzare così la tenuta.
Realizzato in PP caricato fibra di vetro, garantisce
una elevata resistenza meccanica pur essendo
particolarmente leggero.
L’unica parte in PVC è l’adattatore delle membrane.
All pressure groups come with an aluminium bearing plate of high grade
alloy 6061-T6 according to ASME SB-221. Two threaded holes in the
bearing plate of the side port version allow for easy and reliable removal.
Unique sealing plate and permeate port construction from a single,
injection molded part reducing component parts by 75% and saving an
internal seal. Low weight and high long-term mechanical strength through
glass filled PP composite material of sealing plate and thrust cone. The
only PVC part is the membrane adaptor.
L’attacco standard del permeato è realizzata con un
collare in PVC-U con un tronchetto in PVC-U d. 32 a
incollaggio.
Altri attacchi sono disponibili su richiesta.
Standard option for permeate connection is a PVC-U union, with glueing
socket of 32 mm in diameter. Other options are available on request.
4
5
6
Il particolare cono di distribuzione, realizzato in PP
caricato fibra di vetro, si adatta perfettamente alla
superficie interna del contenitore, riduce le zone
di ristagno dell’acqua e permette una migliore
distribuzione del flusso.
Il cono inserendosi sul bordo esterno del collettore del
permeato non subisce alcuna rotazione durante la fase
di esercizio e rimane saldamente ancorato al tappo di
chiusura anche durante la fase di montaggio e apertura
del pressure vessel contenitore.
Unique thrust cone construction, made in glass filled PP composite
material, combines superior surface finish with best flow distribution and
smallest deadwater zones. The thrust cone attaches to the permeate port
to ensure the thrust cone does not rotate during operation and that it
does not fall off the head when handling the head assembly and during
installation.
Gli attacchi di alimento e concentrato, realizzati in AISI
316L o in DUPLEX per i contenitori da 70 bar (1000
psi) e 80 bar (1200 psi), sono sostituibili sia nei modelli
“front-port” che nei modelli “side-port”.
Proven installation technology and construction of side ports and the
sideport seals made in AISI 316L or in DUPLEX for 70 bar (1000 psi) e 80
bar (1200 psi) pressure vessels. Replaceable side ports and end ports
L’elevata qualità della produzione si traduce in
una perfetta regolarità della superficie interna del
contenitore (Pressure Vessel).
Highest surface quality in production equipment results in the industry’s
smoothest surface finish inside a vessel.
7
265
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
INFORMAZIONI TECNICHE - Engineering information
PV WAVE 8’’
Corpo - Shell
Materiale corpo - Shell material
Fibra di vetro rinforzata resina poliestere - Fiber-reinforced polyester resin
Misure - Sizes
Diametri disponibili - Diameters available
8”
Lunghezze disponibili per mod. 8”
da 1 elemento a 7 con lunghezza 40” (8 elementi su richiesta)
Sizes available for 8” model
from 1 element to 7 length 40” (8 element length 40” on request)
Colore - Colors
Colore standard - Standard color
Blue No. 0146, equivalent RAL 5012 (Standard)
Colori disponibili - Available colors
Tutti - Any
Prezzo supplementare per colore
Bianco: nessuno - Altri colori: nessuno per quantità > di 60 pezzi
Price supplement for colors
White: no supplement - Other colors: no supplement for > 60 pces
Tappo - Head
Materiale - Materials:
Seiger di chiusura - Retaining and locking rings
SS 316 L, SA-312
Tappo di chiusura - Sealing plate
Polipropilene rinforzato fibra di vetro - Glass-filled PP
Disco di chiusura - Bearing plate
Alluminio anodizzato 6061 T6 - Hard-anodized aluminum 6061 T6
Guarnizioni - All gaskets & seals
EPDM
Adattatore tappo/membrana - Adaptor head/membrane
PVC
Misure - Sizes
Diametri disponibili - Diameters available
8”
Attacchi alta pressione - High pressure ports
Materiali - Materials
Acqua salmastra - Brackish water
SS 316 L
Acqua mare - Sea water
254 SMO
Tipi di attacchi - Type of connections
Attacchi alta pressione - High pressure ports
Front-port, side-port, multiport
Misure - Sizes
Front-port: 1.5” victaulic - Side-port: 1.5”, 2”, 2,5”, 3” victaulic
Multi-port: 1.5”, 2”, 2,5”, 3” victaulic
Disponibilità attacchi aggiuntivi -Additional ports available
Sì - Yes
Differenti attacchi sullo stesso contenitore
Different port sizes on same vessel
Clocking without price supplement
Sì - Yes
Sì - Yes
Attacchi permeato - Permeate ports
Materiale - Material
Connessione - Connection
Polipropilene rinforzato fibra di vetro (integrato con tappo di chiusura)
Fiber-reinforced PP (integrated with sealing plate)
Bocchettone in PVC a incollaggio d32mm. Altre opzioni su richiesta.
Opzione in acciaio su richiesta.
Union with glueing socket d32mm in PVC. Other options on request. SS option available.
Tipi di attacchi - Type of connections
Misure - Sizes
Bocchettone in PVC a incollaggio d32mm - Filettatura 1” gas femmina
Union with glueing socket d32mm (Standard) - G1” female thread
Selle e tiranti - Saddles and straps
Selle - Saddles
Poliuretano - Polyurethane
Tiranti - Straps
SS 304 L
Protezione tirante - Strap protection jacket
PVC morbido - Soft PVC
Bullone tirante - Strap nut
Bronzo Hpb51-9 - Bronze Hpb51-9
Pressioni - Pressures
Pressioni disponibili - Pressure available
Da 21 bar (300 psi) a 80 bar (1200 psi) - From 21 bar (300 psi) to 80 bar (1200 psi)
Certificati - Certificates
Produzione - Production
Certificata asme in accordo a Sez. X del Cod. ASME per contenitori in pressione
Certified by ASME according to Section X of ASME Code for Pressure Vessels
Uso per acqua potabile - Contact with potable water
KTV - Germany (German standard for plastics in potable water) - NSF 61 - USA
Materiale compreso ad ogni forniturA - Scope of supply
Corpo (come ordinato) - Shell as ordered
n. 1 Color Blue No. 0146 (equivalent RAL 5012)
Tappi - Heads
n. 2 ciascuno con i seguenti attacchi - each with following connections
Adattatore tappo/membrana - Adaptor head/membrane
n. 2 aperti - open
Selle - Saddles
n. 2 per contenitori da 1 a 4 elementi - for pressure vessels from 1 to 4 elements
n. 3 per contenitori da 5 a 8 elementi - for pressure vessels from 5 to 8 elements
Tiranti - Straps
n. 2 per contenitori da 1 a 8 elementi - for pressure vessels from 1 to 8 elements
Modello 8” “front-port”- Model 8” “front-port”
Modello 8” “side-port”- Model 8” “side-port”
Modello 8” “multi-port”- Model 8” “multi-port”
266
n. 1 Feed /Conc. 1,5’’ victaulic - n. 1 Union with glueing socket d32mm
n. 1 Union with glueing socket d32mm
n. 1 Union with glueing socket d32mm
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
INFORMAZIONI TECNICHE - Engineering information
PV WAVE 4’’
Corpo - Shell
Materiale corpo - Shell material
Fibra di vetro rinforzata resina poliestere - Fiber-reinforced polyester resin
Misure - Sizes
Diametri disponibili - Diameters available
4”
Lunghezze disp. per mod. 4”- Sizes available for 4” model
da 1 elemento a 6 con lunghezza 40” - from 1 element to 6 length 40”
Colore - Colors
Colore standard - Standard color
Blue No. 0146, equivalent RAL 5012 (Standard)
Colori disponibili - Available colors
Tutti - Any
Prezzo supplementare per colore
Bianco: nessun supplemento
Altri colori: nessun supplemento per quantità > di 60 pezzi
Price supplement for colors
White: no supplement - Other colors: no supplement for > 60 pces
Tappo - Head
Materiale - Materials:
Seiger di chiusura - Baffle
SS 316L - 254 SMO (1000 psi)
Tappo di chiusura - Sealing plate
PVC
Viti di chiusura - Allen screws
M8*20 Grade 8.8
Guarnizioni - All gaskets & seals
EPDM
Adattatore tappo/membrana (1000 PSI)
Adaptor head/membrane (1000 PSI)
PVC
Misure - Sizes
Diametri disponibili - Diameters available
4”
Attacchi alta pressione - High pressure ports
Materiali - Materials
Acqua salmastra - Brackish water
SS 316 L
Acqua mare - Sea water
254 SMO
Tipi di attacchi - Type of connections
Attacchi alta pressione - High pressure ports
Front-port, side-port
Misure - Sizes
Front-port: 3/4” BSP F - 3/4” BSP M (1000 psi)
Side-port: 3/4” victaulic
Attacchi permeato - Permeate ports
Materiale - Material
PVC (integrato con tappo di chiusura) - PVC (integrated with sealing plate)
Tipi di attacchi - Type of connections
Misure - Sizes
Filettatura 1/2” BSP F - 1/2” BSP F thread
Filettatura 1/2” BSP M (1000 psi) - 1/2” BSP M thread (1000 psi)
Selle e tiranti - Saddles and straps
Selle - Saddles
Poliuretano - Polyurethane
Tiranti - Straps
SS 304 L
Protezione tirante - Strap protection jacket
PVC morbido - Soft PVC
Bullone tirante - Strap nut
Bronzo Hpb51-9 - Bronze Hpb51-9
Pressioni - Pressures
Pressioni disponibili
Da 21 bar (300 psi) a 70 bar (1000 psi)
Pressure available
From 21 bar (300 psi) to 70 bar (1000 psi)
Certificati - Certificates
Produzione - Production
Uso per acqua potabile - Contact with potable water
Certificata asme in accordo a Sez. X del Cod. ASME per contenitori in pressione
Certified by ASME according to Section X of ASME Code for Pressure Vessels
KTV - Germany (German standard for plastics in potable water) - NSF 61 - USA
Materiale compreso ad ogni fornitura - Scope of supply
Corpo (come ordinato) - Shell as ordered
n. 1 color Blue No. 0146 (equivalent RAL 5012)
Tappi - Heads
n. 2 ciascuno con i seguenti attacchi - each with following connections
Modello 4” “side-port”- Model 4” “side-port”
n. 1 Permeate 1/2” BSP F or 1/2” BSP M (1000 psi)
Modello 4” “front-port”- Model 4” “front-port”
Adattatore tappo/membrana (1000 psi)
Adaptor head/membrane (1000 psi)
n. 1 Feed/concentrate 3/4” BSP F or 3/4” BSP M (1000 psi)
n. 1 Permeate 1/2” BSP F or 1/2” BSP M (1000 psi)
n. 1 aperto - open
Selle - Saddles
n. 2 per contenitori da 1 a 4 elementi - for pressure vessels from 1 to 4 elements
n. 3 per contenitori da 5 a 6 elementi - for pressure vessels from 5 to 6 elements
Tiranti - Straps
n. 2 per contenitori da 1 a 6 elementi - for pressure vessels from 1 to 6 elements
267
268
8
8 -- H --
-- BL
Ordering:
Contact Person:
1Model:
Attachment 1: Membrane Housing Length options
Element
1
1.5
2
3
4
5
1
1.5
2
3
4
5
Code
WAVE -- 300
WAVE
300 - E
E --
6
6
White
Blue
Female Thread NPT 1''
Male Thread NPT 1 1/4''
Female Thread Rp 1''
Male Thread G 1 1/2'' x 11
7
7
300PSI
400PSI
600PSI
1000PSI
1200PSI
Quantity:
8
8
Contact:
7.5
7.5
Brand Name
1200
300
400
600
1000
Membrane Housing Max. Operating Pressure
Options:
Feed/Concentrate Port Type: End Port 1''1/2 vic.
Membrane Housing Diameter 8''
F
M
G
H
Permeate port thread
See attachment 2 for options
Length Code
See attachment 1 for options
WH
BL
Membrane Housing Paint Color
Options
Standard model
Membrane Housing Specification Chart
ER
CYB
Model WAVE-300E-8-H-1-WH
VE
WA
8'' 30 0PSI Dash 1
Serial Number
Female Thread
Permeate Port
1.5'' End
Male Thread G 1 1/2''X11 Code H
This thread fits a 1 1/4''union nut.
(Stainless Steel option is available.
Please contact customer service ）
Union Nut
EC30-08-29-PVC
Union Adaptor
EC30-08-28-PVC
O Ring：
EC30-08-27-EPDM
Male Thread
Male Thread NPT 1 1/4'' Option M
Male Thread
Please understand this example before filling out the
ordering page. For questions concerning the use of this
chart, please call the factory.
EXAMPLE
Female Thread Rp 1'' Option G
Female Thread
Female Thread NPT 1'' Option F
Female Thread
Attachment 2: Permeate port thread type options:
Tabella specifiche e composizione codice - Specification chart and code composition
PV WAVE 8’’ END PORT
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
62.1
(1579)
82.1
(2087)
102.1
(2595)
142.1
(3611)
182.1
(4627)
222.1
(5643)
262.1
(6659)
302.1
(7675)
322.1
(8183)
342.1
(8691)
L
Inch
(mm)
2.5
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
S
Span
Inch
(mm)
1
FEED/CONCENTRATE
55
(25)
63
(28)
70
(32)
90
(41)
110
(50)
125
(57)
145
(66)
135
(75)
175
(80)
185
(84)
21
EMPTY WEIGHT
lb
(kg)
40 51.0
25 BOTTOM LABEL
24 TOP LABEL
23 ALUMINUM PLATE LABEL
22 LOGO LABEL
21 SERIAL NO. LABEL
20 ALLEN SCREW
19 RETAINING RING
18 BEARING PLATE
17 HEAD SEAL
16 FEED/CONCENTRATE O RING
15 STRAP PROTECTIVE JACKET
14 STRAP NUT
13 STRAP
12 SADDLE
11 STRAP SCREW
10 PERMEATE RETAINING RING
9 RETAINING RING
8 THREE TURN LOCKING RING
7 PERMEATE PORT
6 ADAPTOR O RING
5 THRUST CONE
4 PWT SEAL
3 ADAPTOR
2 FEED/CONCENTRATE PORT
1 SHELL
ITEM
DESCRIPTION
PERMEATE PORT
OPTION M: NPT 1 1/4'' MALE THREAD
PRESSURE VESSELS
L±4
201.8±0.12
214
15
8
9
51.0 40
24
20
12
11
10
1:1
åDETAIL
17
230
240
18
2
19
VERSION NO.
NAME
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
INSPECTION
DESIGN
SIGNATURE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
SIGNATURE
DATE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-300E-8
UNIT: MM
ED30-08-00
DRAWING NO.
TOTAL PAGE: 1
0
VERSION NO.
DESCRIPTION
300PSI MEMBRANE HOUSING
(END PORT)
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:8
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE =0.5° ROOT RADIUS =0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ±0.1°
DESCRIPTION OF CHANGES
14
13
1.5'' GROOVED END
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 300PSI(21kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃ °49℃
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
SAMPLE RATE - 100%
PRESSURE, I.E.:450PSI 31.5kg/cm^2
16
FEED/CONCENTRATE
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1" FEMALE THREAD
OPTION H: G 1 1/2" x 11 MALE THREAD
1 ARTPAPER 15*32
EC30-08-24
1 ARTPAPER 15*32
EC30-08-23
2 ADHESIVE LABEL
ED25-08-08
2 ADHESIVE LABEL
EC30-08-21
1 ARTPAPER 20*60
ED25-08-07
2 STAINLESS STEEL、GRADE 8.8、M5*8
11552
2 316L, SA-312 STAINLESS STEEL D0= 48
ED25-08-06
ED30-08-05
2 6061-T6, SB-221
EC30-08-26
2 SI
ED25-08-04
2 EPDM
EC30-08-19
2 SOFT PVC
EC30-08-18
2 Hpb51-9
EC30-08-17
2 304
EC30-08-16
2 POLYURETHANE
4 STAINLESS STEEL、GRADE 8.8、M8*70
11531
EC30-08-03
2 316L, SA-312 STAINLESS STEEL
EC30-08-15
2 316L, SA-312 STAINLESS STEEL
EC30-08-12
2 316L, SA-312 STAINLESS STEEL
1 PP+FG30%
ED30-08-03
2 EPDM
EC30-08-08
1 PP+FG30%
ED25-08-07
4 EPDM
EC30-08-14
2 PVC
EC30-08-13
2 316L, SA-312 STAINLESS STEEL
ED25-08-02
ED25-08-01
1 FILAMENT WOUND, EPOXY FRP
DRAWING NO. QTY
MATERIAL
S
40
3 4 5 6 7
63.5
PV WAVE-300E-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
269
Contenitori per membrane - Membrane pressure vessels
PV WAVE-450E-8
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
270
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
62.9
(1599)
82.9
(2107)
102.9
(2615)
142.9
(3631)
182.9
(4647)
222.9
(5663)
262.9
(6679)
302.9
(7695)
322.9
(8203)
342.9
(8711)
L
Inch
(mm)
7
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
S
Span
Inch
(mm)
1
FEED/CONCENTRATE
40
80
(36)
100
(42)
105
(48)
135
(61)
160
(73)
190
(86)
215
(98)
245
(111)
260
(118)
275
(125)
21
EMPTY WEIGHT
lb
(kg)
51.0
25 BOTTOM LABEL
24 TOP LABEL
23 ALUMINUM PLATE LABEL
22 LOGO LABEL
21 SERIAL NO. LABEL
20 ALLEN SCREW
19 RETAINING RING
18 BEARING PLATE
17 HEAD SEAL
16 FEED/CONCENTRATE O RING
15 STRAP PROTECTIVE JACKET
14 STRAP NUT
13 STRAP
12 SADDLE
11 STRAP SCREW
10 PERMEATE RETAINING RING
9 RETAINING RING
8 THREE TURN LOCKING RING
7 PERMEATE PORT
6 ADAPTOR O RING
5 THRUST CONE
4 PWT SEAL
3 ADAPTOR
2 SIDE PORT
1 SHELL
ITEM
DESCRIPTION
PERMEATE PORT
OPTION M: NPT 1 1/4'' MALE THREAD
PRESSURE VESSELS
L±4
? 201.8±0.12
? 230
15
8
9
51.0 40
33
20
12
11
10
1:1
DETAIL
17
230
? 260
18
2
19
VERSION NO.
NAME
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
INSPECTION
DESIGN
SIGNATURE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
SIGNATURE
DATE
1:8
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-600E-8
UNIT: MM
ED60-08-00
DRAWING NO.
TOTAL PAGE: 1
0
VERSION NO.
DESCRIPTION
600PSI MEMBRANE HOUSING
(END PORT)
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE =0.5° ROOT RADIUS =0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ±0.1°
DESCRIPTION OF CHANGES
14
13
1.5'' GROOVED END
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 600PSI(42kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃ °49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
PRESSURE, I.E.: 900PSI 63kg/cm^2
SAMPLE RATE - 100%
16
FEED/CONCENTRATE
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1" FEMALE THREAD
OPTION H: G 1 1/2" x 11 MALE THREAD
EC30-08-24
1 ARTPAPER 15*32
EC30-08-23
1 ARTPAPER 15*32
2 ADHESIVE LABEL
ED60-08-08
EC30-08-21
2 ADHESIVE LABEL
1 ARTPAPER 20*60
ED60-08-07
2 STAINLESS STEEL、GRADE 8.8、M5*8
11552
2 304
ED60-08-06
ED60-08-05
2 6061-T6，SB-221
2 SI
EC30-08-26
ED25-08-04
2 EPDM
EC30-08-19
2 SOFT PVC
EC30-08-18
2 Hpb51-9
EC30-08-17
2 304
EC30-08-16
2 POLYURETHANE
4 STAINLESS STEEL、GRADE 8.8、M8*70
11531
EC30-08-03
2 316L，SA-312 STAINLESS STEEL
EC30-08-15
2 316L，SA-312 STAINLESS STEEL
EC30-08-12
2 316L，SA-312 STAINLESS STEEL
1 PP+FG30%
ED60-08-03
EC30-08-08
2 EPDM
ED25-08-07
1 PP+FG30%
EC30-08-14
4 EPDM
2 PVC
EC30-08-13
2 316L，SA-312 STAINLESS STEEL
ED60-08-02
ED60-08-01
1 FILAMENT WOUND, EPOXY FRP
DRAWING NO. QTY
MATERIAL
S
40
3 4 5 6 7
63.5
PV WAVE-600E-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
271
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
65.8
(1671)
85.8
(2179)
105.8
(2687)
145.8
(3703)
185.8
(4719)
225.8
(5735)
265.8
(6751)
305.8
(7767)
325.8
(8275)
345.8
(8783)
L
Inch
(mm)
43
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
S
Span
Inch
(mm)
1
FEED/CONCENTRATE
40
115
(52)
135
(61)
155
(70)
200
(91)
240
(109)
285
(129)
325
(147)
365
(166)
385
(175)
405
(184)
21
EMPTY WEIGHT
lb
(kg)
80.0
25 BOTTOM LABEL
24 TOP LABEL
23 ALUMINUM PLATE LABEL
22 LOGO LABEL
21 SERIAL NO. LABEL
20 ALLEN SCREW
19 RETAINING RING
18 BEARING PLATE
17 HEAD SEAL
16 FEED/CONCENTRATE O RING
15 STRAP PROTECTIVE JACKET
14 STRAP NUT
13 STRAP
12 SADDLE
11 STRAP SCREW
10 PERMEATE RETAINING RING
9 RETAINING RING
8 THREE TURN LOCKING RING
7 PERMEATE PORT
6 ADAPTOR O RING
5 THRUST CONE
4 PWT SEAL
3 ADAPTOR
2 FEED/CONCENTRATE PORT
1 SHELL
ITEM
DESCRIPTION
PERMEATE PORT
OPTION M: NPT 1 1/4'' MALE THREAD
PRESSURE VESSELS
L±4
236
40
15
8
9
69
80.0
40
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
NAME
SIGNATURE
INSPECTION
DESIGN
16
DETAIL
1:1
17
18
19
2
14
12
DESCRIPTION OF CHANGES
SIGNATURE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-1000E-8
UNIT: MM
ED10-08-00
DRAWING NO.
TOTAL PAGE: 1
0
VERSION NO.
DESCRIPTION
1000PSI MEMBRANE HOUSING
(END PORT)
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:8
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE =0.5° ROOT RADIUS=0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ±0.1°
DATE
1.5'' GROOVED END
13
230
272
11
10
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 1000PSI(70kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃ °49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
PRESSURE, I.E.:1500PSI 105kg/cm^2
SAMPLE RATE - 100%
20
FEED/CONCENTRATE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
VERSION NO.
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1" FEMALE THREAD
OPTION H: G 1 1/2" x 11 MALE THREAD
3 4 5 6 7
EC30-08-24
1 ARTPAPER 15*32
EC30-08-23
1 ARTPAPER 15*32
ED10-08-08
2 ADHESIVE LABEL
EC30-08-21
2 ADHESIVE LABEL
ED10-08-07
1 ARTPAPER 20*60
11552
2 STAINLESS STEEL GRADE 8.8 M5*8
ED10-08-06
2 304
ED10-08-05
2 6061-T6，SB-221
EC30-08-26
2 SI
ED25-08-04
2 EPDM
EC30-08-19
2 SOFT PVC
EC30-08-18
2 Hpb51-9
EC30-08-17
2 304
EC30-08-16
2 POLYURETHANE
11531
4 STAINLESS STEEL GRADE 8.8 M8*70
EC30-08-03
2 316L，SA-312 STAINLESS STEEL
EC10-08-15
2 316L，SA-312 STAINLESS STEEL
EC10-08-12
2 316L，SA-312 STAINLESS STEEL
1 PP+FG30%
ED10-08-03
EC30-08-08
2 EPDM
ED25-08-07
1 PP+FG30%
EC30-08-14
4 EPDM
EC30-08-13
2 PVC
ED10-08-02
2 00Cr22Ni15MoSN
ED10-08-01
1 FILAMENT WOUND, EPOXY FRP
MATERIAL
DRAWING NO. QTY
S
201.8±0.12
272
63.5
PV WAVE-1000E-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
8 -8
1R 6R
1
1
3
3
3
3
3
1,5’’
1.5
1.5
2
2
3
3
3
3
3
2’’
3
3
4
4
3
3
3
3
3
2,5’’
6
6
7
7
-- BL
White
Blue
Male Thread G 1 1/2''X11
Male Thread NPT 1 1/4''
Female Thread NPT 1''
Female Thread Rp 1''
3
3
3
3
3
3’’
7.5
7.5
8
8
Brand Name
300
450
600
1000
1200
300PSI
450PSI
600PSI
1000PSI
1200PSI
Membrane Housing Max. Operating Pressure
Options:
Feed/Concentrate Port Type: Side Port
Membrane Housing Diameter: 8"
Feed/Concentrate Port Configurations
See Feed/Concentrate Port Chart for
options and code information
H
M
F
G
Permeate Port Thread
Options
Length Code
See Attachment 1 for options
WH
BL
Membrane Housing Paint Color
Options
Standard model
Ordering:
Quantity
Contact
Model
Contact Person
Standard Model WAVE-300P-8-1R6R-H-...-BL 8'', 300PSI, n. ... Element, Two 1.5'' Side Port Opposite End
Permeate Port Thread- G 1 1/2"X 11 Male Thread D32 Code H, Color Blue
1200PSI
1000PSI
600PSI
450PSI
300PSI
F (element)
Code
5
5
-- H --
Attachment 1: Membrane Housing Length Options
WAVE
WAVE -- 300
300 - P
P --
Membrane Housing Spicification Chart
5
1
3
WA
ER
CYB
VE
Female Thread
Permeate Port
3
WA
Serial No.
1
ER
CYB
VE
8'' 300PSI Dash 1
R
R
4
4
3
S
S
-
F
F
Female Thread Rp 1'' Code G
Female Thread NPT 1'' Code F
Female Thread
Male Thread NPT 1 1/4'' Code M
Male Thread
Male Thread G 1 1/2''X11 Code H
This thread fits a 1 1/4''union nut.
(Stainless Steel option is available.
Please contact customer service ）
Union Nut
EC30-08-29-PVC
Union Adaptor
EC30-08-28-PVC
O Ring：
EC30-08-27-EPDM
Male Thread
Permeate port thread type options:
6
2
Model: WAVE-300P-8-1R3S2R4S-F-1-WH
1
2
4
Opposite End
2
Female Thread
Permeate Port
Serial Number End
This example is provided to show you the proper way
to specify your port locations. Please understand this
example before filling out the ordering page. For
questions concerning the use of this chart, please call
the factory.
EXAMPLE
Opposite End
Serial No. End
Port Size Code
R
1-1/2'' Grooved End
NEW
S
2'' Grooved End
U 3’’ Grooved End
T
2-1/2'' Grooved End
Note: Three ports per end maximum
2-1/2'' - 3'' ports are not allowed 90 degrees from any other port.
See current product options on Attachment 2.
This chart is used to specify the location of the ports for each different vessel
configuration in the system. Always use this chart to specify proper side port
locations. If you have any questions, call the factory. Please use this chart as
follows:
1、Determine proper port sizes on multiple port vessels.
2、Determine the proper port location and quantity for each vessel.
3、Starting at the serial number end, enter the location of the first port followed
by the port size. Repeat this for each port on the serial number end.
4、Moving to the opposite end, enter the location of the first port followed by
the port size. Repeat this for each port on this end.
5、Enter this information at the bottom of the ordering page for each vessel
configuration.
6、Sign and date the ordering page before you send it to us.
Serial No.
7
8
FEED/CONCENTRATE PORT CONFIGUARATIONS
Tabella specifiche e composizione codice - Specification chart and code composition
PV WAVE 8’’ SIDE PORT / MULTIPORT
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
273
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
22
58.4
(1483)
78.4
(1991)
98.4
(2499)
138.4
(3515)
178.4
(4531)
218.4
(5547)
258.4
(6563)
298.4
(7579)
318.4
(8087)
338.4
(8595)
L
Inch
(mm)
165
47
(1194)
67
(1702)
87
(2210)
127
(3226)
167
(4242)
207
(5258)
247
(6274)
287
(7290)
307
(7798)
327
(8306)
P
Standard
Inch
(mm)
51
1
PRESSURE VESSELS
23
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
63
(29)
73
(33)
83
(38)
103
(47)
123
(56)
143
(65)
163
(74)
183
(83)
193
(88)
203
(92)
EMPTY WEIGHT
lb
(kg)
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ITEM
S
P±1.5
L±4
201.8±0.12
216
14
7
8
II
139
1
4
6
9
ARTPAPER 15*32
ARTPAPER 15*32
ADHESIVE LABEL
ADHESIVE LABEL
ARTPAPER 20*60
M5*14 STAINLESS STEEL, GRADE 8.8
SOFT PVC
M8*80 STAINLESS STEEL, GRADE 8.8
Hpb51-9
304
POLYURETHANE
316 STAINLESS STEEL
EPDM
PVC
316L，SA-312 STAINLESS STEEL
EPDM
PP+FG30%
6061-T6，SB-221
EPDM
PP+FG30%
316L，SA-312 STAINLESS STEEL
EPDM
EPDM
316L，SA-312 STAINLESS STEEL
316L，SA-312 STAINLESS STEEL
FILAMENT WOUND, EPOXY FRP
MATERIAL
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
13
BOTTOM LABEL
EC30-08-24
1
EC30-08-23
TOP LABEL
1
ALUMINUM PLATE LABEL
2
EC30-08-22
LOGO LABEL
EC30-08-21
2
SERIAL NO. LABEL
EC30-08-20
1
11508
ALLEN SCREW
4
STRAP PROTECTIVE JACKET
EC30-08-19 2
11531
STRAP SCREW
4
STRAP NUT
EC30-08-18 4
STRAP
EC30-08-17 2
SADDLE
EC30-08-16 2
THREE TURN LOCKING RING
EC30-08-15 2
PWT SEAL
EC30-08-14 4
ADAPTOR
EC30-08-13 2
RETAINING RING
EC30-08-12 2
HEAD SEAL
EC30-08-26 2
PERMEATE PORT(300PSI)
EC30-08-10 2
BEARING PLATE
EC30-08-09 2
ADAPTOR O RING
EC30-08-08 2
THRUST CONE
EC30-08-07 1
EC30-08-06 4
SIDEPORT RETAINING RING
EC30-08-05 2
SIDEPORT SEAL
EC30-08-04 2
CURVED SIDEPORT SEAL
EC30-08-03 2
PERMEATE RETAINING RING
EC30-08-02 2
SIDE PORT
SHELL
EC30-08-01 1
DRAWING NO. QTY
DESCRIPTION
PERMEATE PORT
(OPTION M: NPT 1 1/4'' MALE THREAD)
S
Span
Inch
(mm)
310
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
15
5
11
150
21
3
2
VERSION NO.
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
INSPECTION
NAME
SIGNATURE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
DESIGN
11
1
10
24
16
DO NOT
DO NOT
9
CHECKLIST
II DETAIL
1:1
230
WAVE CYBER
PRE-PRESSURE
*******
UPSTREAM
WAVE CYBER
246
19
SIGNATURE
DATE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
UNIT: MM
EC30-08-00
DRAWING NO.
0
TOTAL PAGE: 1
VERSION NO.
300PSI MEMBRANE HOUSING
DESCRIPTION
MODEL WAVE-300P-8
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:6
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE=0.5° ROOT RADIUS=0.5
DIMENSIONAL TOLERANCEӏX.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCEӏ±0.1°
DESCRIPTION OF CHANGES
15
12
1.5'' GROOVED END
18
17
25
26
TECHNICAL REQUIREMENT
1. TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2. MAX OPERATING PRESSURE - 300PSI(21kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃ °49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3. LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
PRESSURE, I.E.:450PSI 31.5kg/cm^2
SAMPLE RATE - 100%
I DETAIL
1:1
12
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1'' FEMALE THREAD
OPTION H: G 1 1/2''x 11 MALE THREAD
10
127
274
205.7±0.1
PV WAVE-300P-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
2
58.7
(1491)
78.7
(1999)
98.7
(2507)
138.7
(3523)
178.7
(4539)
218.7
(5555)
258.7
(6571)
298.7
(7587)
318.7
(8095)
338.7
(8603)
L
Inch
(mm)
165
47
(1194)
67
(1702)
87
(2210)
127
(3226)
167
(4242)
207
(5258)
247
(6274)
287
(7290)
307
(7798)
327
(8306)
P
Standard
Inch
(mm)
51
1
PRESSURE VESSELS
23
76
(35)
89
(40)
102
(46)
128
(58)
154
(70)
180
(82)
205
(93)
231
(105)
244
(111)
257
(117)
EMPTY WEIGHT
lb
(kg)
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ITEM
S
P±1.5
L±4
201.8±0.12
221
14
7
8
II
139
1
4
6
9
ARTPAPER 15*32
ARTPAPER 15*32
ADHESIVE LABEL
ADHESIVE LABEL
ARTPAPER 20*60
M5*14 STAINLESS STEEL, GRADE 8.8
SOFT PVC
M8*80 STAINLESS STEEL, GRADE 8.8
Hpb51-9
304
POLYURETHANE
316 STAINLESS STEEL
EPDM
PVC
316L，SA-312 STAINLESS STEEL
EPDM
PP+FG30%
6061-T6，SB-221
EPDM
PP+FG30%
316L，SA-312 STAINLESS STEEL
EPDM
EPDM
316L，SA-312 STAINLESS STEEL
316L，SA-312 STAINLESS STEEL
FILAMENT WOUND, EPOXY FRP
MATERIAL
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
13
BOTTOM LABEL
EC30-08-24
1
EC30-08-23
TOP LABEL
1
ALUMINUM PLATE LABEL
EC45-08-22
2
LOGO LABEL
EC30-08-21
2
SERIAL NO. LABEL
EC45-08-20
1
11508
ALLEN SCREW
4
STRAP PROTECTIVE JACKET
EC30-08-19
2
11531
STRAP SCREW
4
EC30-08-18
4
STRAP NUT
EC30-08-17
2
STRAP
EC30-08-16
2
SADDLE
EC45-08-15
2
THREE TURN LOCKING RING
EC30-08-14
4
PWT SEAL
EC30-08-13
2
ADAPTOR
EC30-08-12
2
RETAINING RING
EC30-08-26
2
HEAD SEAL
EC45-08-10
2
PERMEATE PORT(450PSI)
EC45-08-09
2
BEARING PLATE
EC30-08-08
2
ADAPTOR O RING
EC30-08-07
1
THRUST CONE
EC30-08-06
4
SIDEPORT RETAINING RING
EC30-08-05
2
SIDEPORT SEAL
EC30-08-04
2
CURVED SIDEPORT SEAL
EC30-08-03
2
PERMEATE RETAINING RING
EC45-08-02
2
SIDE PORT
EC45-08-01
1
SHELL
DESCRIPTION
DRAWING NO. QTY
PERMEATE PORT
(OPTION M: NPT 1 1/4'' MALE THREAD)
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
S
Span
Inch
(mm)
310
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
15
5
11
205.7±0.2
153
21
3
2
11
1
16
DO NOT
DO NOT
10
24
CHECKLIST
230
WAVE CYBER
9
19
VERSION NO.
NAME
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
INSPECTION
DESIGN
SIGNATURE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
SIGNATURE
15
12
DATE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-450P-8
UNIT: MM
EC45-08-00
DRAWING NO.
0
TOTAL PAGE: 1
VERSION NO.
450PSI MEMBRANE HOUSING
DESCRIPTION
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:6
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE =0.5° ROOT RADIUS=0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ӏ±0.1°
DESCRIPTION OF CHANGES
18
17
25
26
1.5'' GROOVED END
IIDETAIL
1:1
PRE-PRESSURE
*******
UPSTREAM
WAVE CYBER
255
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 450PSI(31.5kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃ °49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
PRESSURE, I.E.: 675PSI 47.25kg/cm^2
SAMPLE RATE - 100%
IDETAIL
1:1
12
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1'' FEMALE THREAD
OPTION H: G 1 1/2''x11 MALE THREAD
10
129
PV WAVE-450P-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
275
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
22
59
(1501)
79
(2009)
99
(2517)
139
(3533)
179
(4549)
219
(5565)
259.1
(6581)
299
(7597)
319
(8105)
339
(8613)
L
Inch
(mm)
51
1
47
(1194)
67
(1702)
87
(2210)
127
(3226)
167
(4242)
207
(5258)
247
(6274)
287
(7290)
307
(7798)
327
(8306)
P
Standard
Inch
(mm)
165
PRESSURE VESSELS
23
S
Span
Inch
(mm)
103
(47.4)
121
(55.7)
139
(64)
175
(80.6)
211
(97.2)
247
(113.7)
282
(130)
318
(146.5)
336
(154.7)
355
(163.5)
EMPTY WEIGHT
lb
(kg)
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ITEM
S
P±1.5
L±4
201.8±0.12
230
14
7
8
1
II
4
139
6
ARTPAPER 15*32
ARTPAPER 15*32
ADHESIVE LABEL
ADHESIVE LABEL
ARTPAPER 20*60
M5*14 STAINLESS STEEL, GRADE 8.8
SOFT PVC
M8*80 STAINLESS STEEL, GRADE 8.8
Hpb51-9
304
POLYURETHANE
316 STAINLESS STEEL
EPDM
PVC
316L，SA-312 STAINLESS STEEL
EPDM
PP+FG30%
6061-T6，SB-221
EPDM
PP+FG30%
316L，SA-312 STAINLESS STEEL
EPDM
EPDM
316L，SA-312 STAINLESS STEEL
316L，SA-312 STAINLESS STEEL
FILAMENT WOUND, EPOXY FRP
MATERIAL
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
13
EC30-08-24
BOTTOM LABEL
1
EC30-08-23
TOP LABEL
1
ALUMINUM PLATE LABEL
EC60-08-22
2
LOGO LABEL
EC30-08-21
2
SERIAL NO. LABEL
EC60-08-20
1
11508
4
ALLEN SCREW
EC30-08-19
2
STRAP PROTECTIVE JACKET
11531
STRAP SCREW
4
EC30-08-18
4
STRAP NUT
STRAP
EC30-08-17
2
SADDLE
EC30-08-16
2
THREE TURN LOCKING RING
EC60-08-15
2
PWT SEAL
4
EC30-08-14
ADAPTOR
2
EC30-08-13
RETAINING RING
2
EC30-08-12
HEAD SEAL
2
EC30-08-26
PERMEATE PORT(600PSI)
2
EC60-08-10
BEARING PLATE
2
EC60-08-09
ADAPTOR O RING
2
EC30-08-08
THRUST CONE
1
EC30-08-07
SIDEPORT RETAINING RING
EC60-08-06
4
SIDEPORT SEAL
EC30-08-05
2
CURVED SIDEPORT SEAL
EC30-08-04
2
PERMEATE RETAINING RING
EC30-08-03
2
SIDE PORT
EC60-08-02
2
SHELL
EC60-08-01
1
DRAWING NO. QTY
DESCRIPTION
PERMEATE PORT
(OPTION M: NPT 1 1/4'' MALE THREAD)
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
310
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
5
15
11
10
12
VERSION NO.
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
NAME
SIGNATURE
INSPECTION
11
1
10
24
16
DO NOT
DO NOT
9
CHECKLIST
II DETAIL
1:1
230
WAVE CYBER
PRE-PRESSURE
*******
UPSTREAM
WAVE CYBER
263
19
SIGNATURE
12
DATE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-600P-8
UNIT: MM
EC60-08-00
DRAWING NO.
0
TOTAL PAGE: 1
VERSION NO.
600PSI MEMBRANE HOUSING
DESCRIPTION
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:6
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE =0.5° ROOT RADIUS =0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ±0.1°
DESCRIPTION OF CHANGES
15
1.5'' GROOVED END
18
17
25
26
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 600PSI(42kg/cm^2
WATER MEDIUM TEMPERATURE - 1℃°49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
PRESSURE, I.E.: 900PSI 63kg/cm^2
SAMPLE RATE - 100%
2
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
DESIGN
21
3
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1'' FEMALE THREAD
OPTION H: G 1 1/2''x11 MALE THREAD
160
I DETAIL
1:1
9
205.7±0.2
276
135
PV WAVE-600P-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
-8
-7.5
-7
-6
-5
-4
-3
-2
-1.5
-1
SHELL
Length
Code
22
23
287
(7290)
327
(8306)
262.1
(6659)
302.1
(7675)
322.1
(8183)
342.1
(8691)
307
(7798)
247
(6274)
207
(5258)
167
(4242)
127
(3226)
87
(2210)
67
(1702)
47
(1194)
P
Standard
Inch
(mm)
1@28
(711)
1@42
(1067)
1@56
(1422)
1@80
(2032)
2@64
(1626)
2@78
(1981)
2@92
(2337)
2@106
(2692)
2@114
(2896)
2@120
(3048)
S
Span
Inch
(mm)
406
(185)
429
(195)
452
(205)
268
(122)
314
(143)
360
(164)
130
(59)
153
(70)
176
(80)
222
(101)
EMPTY WEIGHT
lb
(kg)
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
ITEM
S
L±4
P±1.5
? 236.0
? 201.8
20
14 13
7
EC30-08-24
BOTTOM LABEL
1
EC30-08-23
TOP LABEL
1
ALUMINUM PLATE LABEL
2
EC10-08-22
LOGO LABEL
EC30-08-21
2
SERIAL NO. LABEL
EC10-08-20
1
11508
4
ALLEN SCREW
EC30-08-19
2
STRAP PROTECTIVE JACKET
11531
4
STRAP SCREW
EC30-08-18
4
STRAP NUT
EC30-08-17
2
STRAP
EC30-08-16
2
SADDLE
EC10-08-15
2
THREE TURN LOCKING RING
EC30-08-14
4
PWT SEAL
EC30-08-13
2
ADAPTOR
EC10-08-12
2
RETAINING RING
EC30-08-26
2
HEAD SEAL
EC10-08-10
2
PERMEATE PORT(1000PSI)
EC10-08-09
2
BEARING PLATE
EC30-08-08
2
ADAPTOR O RING
EC30-08-07
1
THRUST CONE
EC30-08-06
4
SIDEPORT RETAINING RING
2
EC10-08-05
SIDEPORT SEAL
2
EC10-08-04
CURVED SIDEPORT SEAL
2
EC30-08-03
PERMEATE RETAINING RING
2
EC10-08-02
SIDE PORT
EC10-08-01
1
SHELL
DRAWING NO. QTY
DESCRIPTION
PRESSURE VESSELS
PERMEATE PORT
OPTION F: NPT 1'' FEMALE THREAD
OPTION G: Rp 1'' FEMALE THREAD
OPTION H: G 1 1/2''x11 MALE THREAD
182.1
(4627)
222.1
(5643)
82.1
(2087)
102.1
(2595)
142.1
(3611)
62.1
(1579)
L
Inch
(mm)
80.0
139
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
II
4
6
I
5
165
1:2
12
I DETAIL
9
80.0
11
DO NOT
DO NOT
1:2
230
WAVE CYBER
PRE-PRESSURE
II DETAIL
CHECKLIST
*******
UPSTREAM
WAVE CYBER
16
24
9
15
17
18
19
25
26
12
NAME
DATE
THIS PRODUCT DRAWING CAN
NOT BE COPIED AND/OR USED
WITHOUT PRIOR WRITTEN
APPROVAL OF WAVE CYBER.
APPROVAL
INSPECTION
DESIGN
SIGNATURE
REFERENTIAL PALSTIC
SHRINKAGE (IF NECESSARY)
SIGNATURE
DATE
DO NOT MEASURE THE DIMENSIONS.
COMPUTER CODE:
SMOOTHNESS
MATERIAL
WAVE-1000P-8
UNIT: MM
EC10-08-00
DRAWING NO.
TOTAL PAGE: 1
0
VERSION NO.
1000PSI MEMBRANE HOUSING
DESCRIPTION
MODEL
WAVE CYBER (SHANGHAI) CO., LTD.
PROJECTION
QUANTITY
1:6
SCALE
IF THERE IS NO ADDITIONAL REMARK IN THE DRAWING, DRAFT ANGLE=0.5° ROOT RADIUS=0.5
DIMENSIONAL TOLERANCE X.±1 X.X±0.1 X.XX±0.05 ANGULAR DIFFERENCE ±0.1°
DESCRIPTION OF CHANGES
TECHNICAL REQUIREMENT
1 TESTED ACCORDING TO ASME BOILER&PRESSURE VESSEL CODE
SECTION X - FIBER REINFORCED PLASTIC PRESSURE VESSELS;
2 MAX OPERATING PRESSURE - 1000PSI
WATER MEDIUM TEMPERATURE - 1℃°49℃,
NOT APPLICABLE TO CORROSIVE LIQUID;
3 LEAKAGE TEST - HYDRO TEST TESTED AT 1.5 TIMES ITS OPERATING
SAMPLE RATE - 100%
PRESSURE, I.E.: 1500PSI 105kg/cm^2
1
10
21
3
1.5'' GROOVED END
PERMEATE PORT
(OPTION M:
NPT 1 1/4'' MALE THREAD)
VERSION NO.
10
FEED/CONCENTRATE
(SIZE & QTY OPTIONAL)
ARTPAPER 15*32
ARTPAPER 15*32
ADHESIVE LABEL
ADHESIVE LABEL
ARTPAPER 20*60
M5*14 STAINLESS STEEL, GRADE 8.8
SOFT PVC
M8*80 STAINLESS STEEL, GRADE 8.8
Hpb51-9
304
POLYURETHANE
316 STAINLESS STEEL
EPDM
PVC
316L，SA-312 STAINLESS STEEL
EPDM
PP+FG30%
6061-T6，SB-221
EPDM
PP+FG30%
316L，SA-312 STAINLESS STEEL
EPDM
EPDM
316L，SA-312 STAINLESS STEEL
00Cr22Ni5Mo3N
FILAMENT WOUND, EPOXY FRP
MATERIAL
8
? 205.8
? 273.4
2
138
1
163
PV WAVE-1000P-8
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
277
278
- - BL
Brand Name
300
400
600
1000
300PSI
400PSI
600PSI
1000PSI
Membrane Housing Max. Operating Pressure
Options:
Feed/Concentrate Port Type: End Port
See product data sheet
Membrane Housing Diameter 4''
Permeate port thread
See product data sheet
Quantity:
Contact:
Contact Person:
6
6
Model:
Attachment 1: Membrane Housing Length options
Element
1
2
3
4
5
1
2
3
4
5
Code
Ordering:
White
Blue
Length Code
See attachment 1 for options
WH
BL
Membrane Housing Paint Color
Options
Standard model
4'' 300PSI End Port Permeate: 1/2''F BSP - Feed/conc.: 3/4'' F BSP
4 --DR -4
Standard Model WAVE-300E-4-DR-...-BL
WAVE
WAVE -- 300
300 - E
E --
Membrane Housing Specification Chart
Tabella specifiche e composizione codice - Specification chart and code composition
PV WAVE 4’’ END PORT
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
Contenitori per membrane - Membrane pressure vessels
PV WAVE-300E-4
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
’
’
’
l
’
279
Contenitori per membrane - Membrane pressure vessels
PV WAVE-1000E-4
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
280
4 -4
1R 6R
1
1
2
2
3
3
4
4
Ordering:
White
Blue
Brand Name
300
450
600
1000
300PSI
450PSI
600PSI
1000PSI
Feed/Concentrate Port Type: Side Port
See product data sheet
Membrane Housing Max. Operating Pressure
Options:
Membrane Housing Diameter: 4"
Feed/Concentrate Port Configurations
See Feed/Concentrate Port Chart for
options and code information
Permeate Port Thread G 1/2'' F BSP
Code R
Length Code
See Attachment 1 for options
WH
BL
Membrane Housing Paint Color
Options
Standard model
Quantity
Contact
Contact Person
4'', 300PSI, n. ... Element, Two 1'' Victaulic Side Port Opposit End
Color blue
6
6
-- BL
Model
Standard Model WAVE-300P-4-1R6R-...-BL
Permeate Port Thread- G 1/2" M BSP
F (element)
Code
5
5
-- R --
Attachment 1: Membrane Housing Length Options
WAVE -- 300
WAVE
300 - P
P --
Membrane Housing Spicification Chart
5
1
3
WA
ER
CYB
VE
Port Size Code
1’’ Grooved End (victaulic)
3
WA
Serial No.
1
ER
CYB
VE
8'' 300PSI Dash 1
R
R
3
4
S
S
-
6
2
4
Model: WAVE-300P-4-1R3S2R4S-1-WH
1
2
4
Opposite End
2
Permeate Port
Serial Number End
This example is provided to show you the proper way
to specify your port locations. Please understand this
example before filling out the ordering page. For
questions concerning the use of this chart, please call
the factory.
EXAMPLE
Opposite End
Serial No. End
Note: 2 ports per end maximum
R
This chart is used to specify the location of the ports for each different vessel
configuration in the system. Always use this chart to specify proper side port
locations. If you have any questions, call the factory. Please use this chart as
follows:
1、Determine proper port sizes on multiple port vessels.
2、Determine the proper port location and quantity for each vessel.
3、Starting at the serial number end, enter the location of the first port followed
by the port size. Repeat this for each port on the serial number end.
4、Moving to the opposite end, enter the location of the first port followed by
the port size. Repeat this for each port on this end.
5、Enter this information at the bottom of the ordering page for each vessel
configuration.
6、Sign and date the ordering page before you send it to us.
Serial No.
7
8
FEED/CONCENTRATE PORT CONFIGUARATIONS
Tabella specifiche e composizione codice - Specification chart and code composition
PV WAVE 4’’ SIDE PORT
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
281
Contenitori per membrane - Membrane pressure vessels
PV WAVE-300P-4
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
282
Contenitori per membrane - Membrane pressure vessels
PV WAVE-1000P-4
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
283
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
PV WAVE 8” 300 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE300E8H1BL
PV 8” 300 PSI End Port
8040
1
1”1/2
D32
WAVE300E8H2BL
PV 8” 300 PSI End Port
8080
2
1”1/2
D32
WAVE300E8H3BL
PV 8” 300 PSI End Port
80120
3
1”1/2
D32
WAVE300E8H4BL
PV 8” 300 PSI End Port
80160
4
1”1/2
D32
WAVE300E8H5BL
PV 8” 300 PSI End Port
80200
5
1”1/2
D32
WAVE300E8H6BL
PV 8” 300 PSI End Port
80240
6
1”1/2
D32
WAVE300E8H7BL
PV 8” 300 PSI End Port
80280
7
1”1/2
D32
Description
PV WAVE 8’’ END PORT
Code
Model
PV WAVE 8” 450 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE450E8H1BL
PV 8” 450 PSI End Port
8040
1
1”1/2
D32
WAVE450E8H2BL
PV 8” 450 PSI End Port
8080
2
1”1/2
D32
WAVE450E8H3BL
PV 8” 450 PSI End Port
80120
3
1”1/2
D32
WAVE450E8H4BL
PV 8” 450 PSI End Port
80160
4
1”1/2
D32
WAVE450E8H5BL
PV 8” 450 PSI End Port
80200
5
1”1/2
D32
WAVE450E8H6BL
PV 8” 450 PSI End Port
80240
6
1”1/2
D32
WAVE450E8H7BL
PV 8” 450 PSI End Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 600 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE600E8H1BL
PV 8” 600 PSI End Port
8040
1
1”1/2
D32
WAVE600E8H2BL
PV 8” 600 PSI End Port
8080
2
1”1/2
D32
WAVE600E8H3BL
PV 8” 600 PSI End Port
80120
3
1”1/2
D32
WAVE600E8H4BL
PV 8” 600 PSI End Port
80160
4
1”1/2
D32
WAVE600E8H5BL
PV 8” 600 PSI End Port
80200
5
1”1/2
D32
WAVE600E8H6BL
PV 8” 600 PSI End Port
80240
6
1”1/2
D32
WAVE600E8H7BL
PV 8” 600 PSI End Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 1000 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1000E8H1BL
PV 8” 1000 PSI End Port
8040
1
1”1/2
D32
WAVE1000E8H2BL
PV 8” 1000 PSI End Port
8080
2
1”1/2
D32
WAVE1000E8H3BL
PV 8” 1000 PSI End Port
80120
3
1”1/2
D32
WAVE1000E8H4BL
PV 8” 1000 PSI End Port
80160
4
1”1/2
D32
WAVE1000E8H5BL
PV 8” 1000 PSI End Port
80200
5
1”1/2
D32
WAVE1000E8H6BL
PV 8” 1000 PSI End Port
80240
6
1”1/2
D32
WAVE1000E8H7BL
PV 8” 1000 PSI End Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 1200 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1200E8H1BL
PV 8” 1200 PSI End Port
8040
1
1”1/2
D32
WAVE1200E8H2BL
PV 8” 1200 PSI End Port
8080
2
1”1/2
D32
WAVE1200E8H3BL
PV 8” 1200 PSI End Port
80120
3
1”1/2
D32
WAVE1200E8H4BL
PV 8” 1200 PSI End Port
80160
4
1”1/2
D32
WAVE1200E8H5BL
PV 8” 1200 PSI End Port
80200
5
1”1/2
D32
WAVE1200E8H6BL
PV 8” 1200 PSI End Port
80240
6
1”1/2
D32
WAVE1200E8H7BL
PV 8” 1200 PSI End Port
80280
7
1”1/2
D32
Code
284
Description
Model
Contenitori per membrane - Membrane pressure vessels
PV WAVE 8” 300 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE300P8H1BL
PV 8” 300 PSI Side Port
8040
1
1”1/2
D32
WAVE300P8H2BL
PV 8” 300 PSI Side Port
8080
2
1”1/2
D32
WAVE300P8H3BL
PV 8” 300 PSI Side Port
80120
3
1”1/2
D32
WAVE300P8H4BL
PV 8” 300 PSI Side Port
80160
4
1”1/2
D32
WAVE300P8H5BL
PV 8” 300 PSI Side Port
80200
5
1”1/2
D32
WAVE300P8H6BL
PV 8” 300 PSI Side Port
80240
6
1”1/2
D32
WAVE300P8H7BL
PV 8” 300 PSI Side Port
80280
7
1”1/2
D32
Description
PV WAVE 8’’ SIDE PORT
Code
Model
PV WAVE 8” 450 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE450P8H1BL
PV 8” 450 PSI Side Port
8040
1
1”1/2
D32
WAVE450P8H2BL
PV 8” 450 PSI Side Port
8080
2
1”1/2
D32
WAVE450P8H3BL
PV 8” 450 PSI Side Port
80120
3
1”1/2
D32
WAVE450P8H4BL
PV 8” 450 PSI Side Port
80160
4
1”1/2
D32
WAVE450P8H5BL
PV 8” 450 PSI Side Port
80200
5
1”1/2
D32
WAVE450P8H6BL
PV 8” 450 PSI Side Port
80240
6
1”1/2
D32
WAVE450P8H7BL
PV 8” 450 PSI Side Port
80280
7
1”1/2
D32
Description
Code
Model
PV WAVE 8” 600 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE600P8H1BL
PV 8” 600 PSI Side Port
8040
1
1”1/2
D32
WAVE600P8H2BL
PV 8” 600 PSI Side Port
8080
2
1”1/2
D32
WAVE600P8H3BL
PV 8” 600 PSI Side Port
80120
3
1”1/2
D32
WAVE600P8H4BL
PV 8” 600 PSI Side Port
80160
4
1”1/2
D32
WAVE600P8H5BL
PV 8” 600 PSI Side Port
80200
5
1”1/2
D32
WAVE600P8H6BL
PV 8” 600 PSI Side Port
80240
6
1”1/2
D32
WAVE600P8H7BL
PV 8” 600 PSI Side Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 1000 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1000P8H1BL
PV 8” 1000 PSI Side Port
8040
1
1”1/2
D32
WAVE1000P8H2BL
PV 8” 1000 PSI Side Port
8080
2
1”1/2
D32
WAVE1000P8H3BL
PV 8” 1000 PSI Side Port
80120
3
1”1/2
D32
WAVE1000P8H4BL
PV 8” 1000 PSI Side Port
80160
4
1”1/2
D32
WAVE1000P8H5BL
PV 8” 1000 PSI Side Port
80200
5
1”1/2
D32
WAVE1000P8H6BL
PV 8” 1000 PSI Side Port
80240
6
1”1/2
D32
WAVE1000P8H7BL
PV 8” 1000 PSI Side Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 1200 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1200P8H1BL
PV 8” 1200 PSI Side Port
8040
1
1”1/2
D32
WAVE1200P8H2BL
PV 8” 1200 PSI End Port
8080
2
1”1/2
D32
WAVE1200P8H3BL
PV 8” 1200 PSI End Port
80120
3
1”1/2
D32
WAVE1200P8H4BL
PV 8” 1200 PSI End Port
80160
4
1”1/2
D32
WAVE1200P8H5BL
PV 8” 1200 PSI End Port
80200
5
1”1/2
D32
WAVE1200P8H6BL
PV 8” 1200 PSI End Port
80240
6
1”1/2
D32
WAVE1200P8H7BL
PV 8” 1200 PSI End Port
80280
7
1”1/2
D32
Code
Description
Model
285
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
PV WAVE 8” 300 PSI - Multi Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE300M8H1BL
PV 8” 300 PSI Multi Port
8040
1
1”1/2
D32
WAVE300M8H2BL
PV 8” 300 PSI Multi Port
8080
2
1”1/2
D32
WAVE300M8H3BL
PV 8” 300 PSI Multi Port
80120
3
1”1/2
D32
WAVE300M8H4BL
PV 8” 300 PSI Multi Port
80160
4
1”1/2
D32
WAVE300M8H5BL
PV 8” 300 PSI Multi Port
80200
5
1”1/2
D32
WAVE300M8H6BL
PV 8” 300 PSI Multi Port
80240
6
1”1/2
D32
WAVE300M8H7BL
PV 8” 300 PSI Multi Port
80280
7
1”1/2
D32
PV WAVE 8’’ MULTI PORT
Code
Description
Model
PV WAVE 8” 450 PSI - Multi Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE450M8H1BL
PV 8” 450 PSI Multi Port
8040
1
1”1/2
D32
WAVE450M8H2BL
PV 8” 450 PSI Multi Port
8080
2
1”1/2
D32
WAVE450M8H3BL
PV 8” 450 PSI Multi Port
80120
3
1”1/2
D32
WAVE450M8H4BL
PV 8” 450 PSI Multi Port
80160
4
1”1/2
D32
WAVE450M8H5BL
PV 8” 450 PSI Multi Port
80200
5
1”1/2
D32
WAVE450M8H6BL
PV 8” 450 PSI Multi Port
80240
6
1”1/2
D32
WAVE450M8H7BL
PV 8” 450 PSI Multi Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 600 PSI - Multi Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE600M8H1BL
PV 8” 600 PSI Multi Port
8040
1
1”1/2
D32
WAVE600M8H2BL
PV 8” 600 PSI Multi Port
8080
2
1”1/2
D32
WAVE600M8H3BL
PV 8” 600 PSI Multi Port
80120
3
1”1/2
D32
WAVE600M8H4BL
PV 8” 600 PSI Multi Port
80160
4
1”1/2
D32
WAVE600M8H5BL
PV 8” 600 PSI Multi Port
80200
5
1”1/2
D32
WAVE600M8H6BL
PV 8” 600 PSI Multi Port
80240
6
1”1/2
D32
WAVE600M8H7BL
PV 8” 600 PSI Multi Port
80280
7
1”1/2
D32
Code
Description
Model
PV WAVE 8” 1000 PSI - Multi Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1000M8H1BL
PV 8” 1000 PSI Multi Port
8040
1
1”1/2
D32
WAVE1000M8H2BL
PV 8” 1000 PSI Multi Port
8080
2
1”1/2
D32
WAVE1000M8H3BL
PV 8” 1000 PSI Multi Port
80120
3
1”1/2
D32
WAVE1000M8H4BL
PV 8” 1000 PSI Multi Port
80160
4
1”1/2
D32
WAVE1000M8H5BL
PV 8” 1000 PSI Multi Port
80200
5
1”1/2
D32
WAVE1000M8H6BL
PV 8” 1000 PSI Multi Port
80240
6
1”1/2
D32
WAVE1000M8H7BL
PV 8” 1000 PSI Multi Port
80280
7
1”1/2
D32
Modello
N. Elementi
In/Out
Victualic
Permeate
Code
Description
Model
PV WAVE 8” 1200 PSI - Multi Port
Codice
Code
286
Descrizione
Description
Model
N. element
WAVE1200M8H1BL
PV 8” 1200 PSI Multi Port
8040
1
1”1/2
D32
WAVE1200M8H2BL
PV 8” 1200 PSI Multi Port
8080
2
1”1/2
D32
WAVE1200M8H3BL
PV 8” 1200 PSI Multi Port
80120
3
1”1/2
D32
WAVE1200M8H4BL
PV 8” 1200 PSI Multi Port
80160
4
1”1/2
D32
WAVE1200M8H5BL
PV 8” 1200 PSI Multi Port
80200
5
1”1/2
D32
WAVE1200M8H6BL
PV 8” 1200 PSI Multi Port
80240
6
1”1/2
D32
WAVE1200M8H7BL
PV 8” 1200 PSI Multi Port
80280
7
1”1/2
D32
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
MATERIALE COMPRESO AD OGNI FORNITURA
Scope of supply
- Corpo contenitore per membrane (pressure vessel) completo di n. 2
tappi di chiusura.
- N. 1 adattatore permeato aperto tappo/membrana
(permeate adaptor)
- N. 1 adattatore permeato chiuso tappo/membrana
(permeate adaptor)
- Pressure vessel body complete with n. 2 end plug.
- N. 1 permeate adaptor open
- N. 1 permeate adaptor close
- N. 2 saddles and straps for pressure vessels from 1 to 4 element
or
- N. 3 saddles and straps for pressure vessels from 5 to 7 element
- N. 2 selle di supporto complete di tiranti per contenitori per membrane
da 1 a 4 elementi
oppure
- N. 3 selle di supporto e n. 2 tiranti per contenitori per membrane da 5
e 7 elementi
287
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
PV WAVE 4” 300 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
WAVE300E4DR1BL
PV 4” 300 PSI End Port
4040
WAVE300E4DR2BL
PV 4” 300 PSI End Port
WAVE300E4DR3BL
In/Out
Permeate
1
3/4” F
1/2”F
4080
2
3/4” F
1/2”F
PV 4” 300 PSI End Port
40120
3
3/4” F
1/2”F
WAVE300E4DR4BL
PV 4” 300 PSI End Port
40160
4
3/4” F
1/2”F
WAVE300E4DR5BL
PV 4” 300 PSI End Port
40200
5
3/4” F
1/2”F
WAVE300E4DR6BL
PV 4” 300 PSI End Port
40240
6
3/4” F
1/2”F
In/Out
Permeate
Description
PV WAVE 4’’ END PORT
Code
Model
N. element
PV WAVE 4” 450 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
WAVE450E4DR1BL
PV 4” 450 PSI End Port
4040
1
3/4” F
1/2”F
WAVE450E4DR2BL
PV 4” 450 PSI End Port
4080
2
3/4” F
1/2”F
WAVE450E4DR3BL
PV 4” 450 PSI End Port
40120
3
3/4” F
1/2”F
WAVE450E4DR4BL
PV 4” 450 PSI End Port
40160
4
3/4” F
1/2”F
WAVE450E4DR5BL
PV 4” 450 PSI End Port
40200
5
3/4” F
1/2”F
WAVE450E4DR6BL
PV 4” 450 PSI End Port
40240
6
3/4” F
1/2”F
In/Out
Permeate
Code
Description
Model
N. element
PV WAVE 4” 1000 PSI - End Port
Codice
Descrizione
Modello
N. Elementi
WAVE1000E4DR1BL
PV 4” 1000 PSI End Port
4040
1
3/4” M
1/2”M
WAVE1000E4DR2BL
PV 4” 1000 PSI End Port
4080
2
3/4” M
1/2”M
WAVE1000E4DR3BL
PV 4” 1000 PSI End Port
40120
3
3/4” M
1/2”M
WAVE1000E4DR4BL
PV 4” 1000 PSI End Port
40160
4
3/4” M
1/2”M
WAVE1000E4DR5BL
PV 4” 1000 PSI End Port
40200
5
3/4” M
1/2”M
WAVE1000E4DR6BL
PV 4” 1000 PSI End Port
40240
6
3/4” M
1/2”M
Code
Description
Model
N. element
MATERIALE COMPRESO AD OGNI FORNITURA
Scope of supply
- Corpo contenitore per membrane (pressure vessel) completo di n. 2
tappi di chiusura.
- N. 2 adattatori permeato aperti tappo/membrana
solo per mod. 1000 psi (permeate adaptor)
- Pressure vessel body complete with n. 2 end plug.
- N. 2 selle di supporto complete di tiranti per contenitori per membrane
da 1 a 4 elementi
oppure
- N. 3 selle di supporto e n. 2 tiranti per contenitori per membrane da 5
e 7 elementi
288
- N. 2 permeate adaptor open only for 1000 psi version
- N. 2 saddles and straps for pressure vessels from 1 to 4 element
or
- N. 3 saddles and straps for pressure vessels from 5 to 7 element
Contenitori per membrane - Membrane pressure vessels
CONTENITORI PER MEMBRANE IN VETRORESINA
Fiberglass pressure vessels for membranes
PV WAVE 4” 300 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE300P41R6R1BL
PV 4” 300 PSI Side Port
4040
1
1’’
1/2”F
WAVE300P41R6R2BL
PV 4” 300 PSI Side Port
4080
2
1’’
1/2”F
WAVE300P41R6R3BL
PV 4” 300 PSI Side Port
40120
3
1’’
1/2”F
WAVE300P41R6R4BL
PV 4” 300 PSI Side Port
40160
4
1’’
1/2”F
WAVE300P41R6R5BL
PV 4” 300 PSI Side Port
40200
5
1’’
1/2”F
WAVE300P41R6R6BL
PV 4” 300 PSI Side Port
40240
6
1’’
1/2”F
Description
PV WAVE 4’’ SIDE PORT
Code
Model
PV WAVE 4” 450 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE450P41R6R1BL
PV 4” 450 PSI Side Port
4040
1
1’’
1/2”F
WAVE450P41R6R2BL
PV 4” 450 PSI Side Port
4080
2
1’’
1/2”F
WAVE450P41R6R3BL
PV 4” 450 PSI Side Port
40120
3
1’’
1/2”F
WAVE450P41R6R4BL
PV 4” 450 PSI Side Port
40160
4
1’’
1/2”F
WAVE450P41R6R5BL
PV 4” 450 PSI Side Port
40200
5
1’’
1/2”F
WAVE450P41R6R6BL
PV 4” 450 PSI Side Port
40240
6
1’’
1/2”F
Description
Code
Model
PV WAVE 4” 1000 PSI - Side Port
Codice
Descrizione
Modello
N. Elementi
N. element
In/Out
Victualic
Permeate
WAVE1000P41R6R1BL
PV 4” 1000 PSI Side Port
4040
1
1’’
1/2”M
WAVE1000P41R6R2BL
PV 4” 1000 PSI Side Port
4080
2
1’’
1/2”M
WAVE1000P41R6R3BL
PV 4” 1000 PSI Side Port
40120
3
1’’
1/2”M
WAVE1000P41R6R4BL
PV 4” 1000 PSI Side Port
40160
4
1’’
1/2”M
WAVE1000P41R6R5BL
PV 4” 1000 PSI Side Port
40200
5
1’’
1/2”M
WAVE1000P41R6R6BL
PV 4” 1000 PSI Side Port
40240
6
1’’
1/2”M
Code
Description
Model
MATERIALE COMPRESO AD OGNI FORNITURA
Scope of supply
- Corpo contenitore per membrane (pressure vessel) completo di n. 2
tappi di chiusura.
- N. 2 adattatori permeato aperti tappo/membrana
solo per mod. 1000 psi (permeate adaptor)
- Pressure vessel body complete with n. 2 end plug.
- N. 2 selle di supporto complete di tiranti per contenitori per membrane
da 1 a 4 elementi
oppure
- N. 3 selle di supporto e n. 2 tiranti per contenitori per membrane da 5
e 7 elementi
- N. 2 permeate adaptor open only for 1000 psi version
- N. 2 saddles and straps for pressure vessels from 1 to 4 element
or
- N. 3 saddles and straps for pressure vessels from 5 to 7 element
289
Everblue s.r.l.
Via Caduti del lavoro
43043 Borgo Val di Taro (Parma) - Italy
Tel. +39-0525-920108 - Fax +39-0525-90177
E-mail: [email protected] - www.everblue.it