PAG 1/8
DESCRIPTION
PREAMPLIFIERS - Class A
designed, manufactured and assembled in the USA
The Preamplifier 07X is Coda’s flagship preamplifier, offering
distortion-free preamplification
and unsurpassed sonic
performance with precision
audiophile-grade components.
Ultra High Class A Bias on
Parralled FET Output Buffer.
Stage with programmable gain on all inputs from Unity to + 18dB.
Balanced and Unbalanced Inputs and Outputs. Extremely lownoise circuitry with no overall feedback. Double-sided gold-plated
circuit boards. Fully remote controlled and learning. All anodized
chassis. Dimensions: 43.2x6x25 cm (LxHxP). Weight: 7 kg.
FET Preamplifier 07X
FET Phono Preamplifier 06X
The 06X is a phono preamplifier,
featuring substantial active and
passive component upgrades.
Balanced and Unbalanced Inputs and
Outputs. Switchable loading and
gain for use with all cartridge
types. Multiple paralleled input FETs
for exceptionally low noise. All FET
voltage gain with bipolar current gain.
No overall feedback. DC-coupled design.
Double-sided gold-plated circuit boards.
All anodized chassis. 10 year warranty.
Dimensions: 43.2x6x25 cm (LxHxP).
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 2/8
DESCRIPTION
INTEGRATED AMPLIFIER
CSiB Integrated Amplifier
designed, manufactured and assembled in the USA
• State-of-the-art, remote-controlled "seperates" performance
with the added benefit of balanced audio inputs for even
greater audio quality.
• Preamplifier section derived from
the Coda 05X design, utilizing
the PGA2320 digitally-controlled
precision analog attenuator.
Component upgrades include
PRP audio resistors, Black Gate
and Multicap capacitors, and high
speed rectifiers for the preamp
power supply.
• Rated Power:
400 Watts per channel into 8Ω
800 Watts per channel into 4Ω
Class A operation to 5 Watts into 8Ω
• 4 stereo RCA inputs, 1 stereo XLR input,
tape & processor loops, subwoofer and
preamplifier outputs
• Bandwidth: DC to -3dB @ 100kHz
• Distortion: Less than 0.04% from 10Hz
to 20kHz at 400 Watts into 4-8©
• Amplifier Gain: 26dB
• Maximum Current: 150 Amperes peak
per channel
• Signal/Noise Ratio: >110 dB
• Slew Rate: >50 Volts per microsecond
• Damping Factor: >150
• Input Impedance: 50k Ohms unbalanced
1k Ohms balanced
• Power Supply: 2.0 kVA toroidal power
transformer with separate windings for
each channel. Dual independent
rectification and 80,000 microfarad of
power supply filter capacitance.
• Dimensions: 43x14x36 cm (LxHxP)
• Weight: 25 kg
• Coda CSX Precison Bias Class A/AB amplifier design, with
discrete JFET differential input stage, VMOSFET voltage gain
DC coupled to an ultra wideband bipolar output stage. Fully
discrete amplifier FET differential input stage DC coupled to
an ultra wideband bipolar output stage. No overall feedback.
Separate tape monitor and processor loops
Stereo subwoofer output
• Wideband, fully-regulated power supply with EMI and RFI line
filtering
• 10 year warranty
• Designed, manufactured and assembled in the USA
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 3/8
DESCRIPTION
STEREO AMPLIFIER - S Series
designed, manufactured and assembled in the USA
Stereo Amplifier S5.5
The S5.5 is a high bandwidth, Pure Class A Stereo Amplifier.
Precision Bias Class A operation. 50 Watts per channel Pure
Class A into 8 Ohms, 100 Watts per channel into 4 Ohms, 200
Watts per channel into 2 Ohms, 200 Watts mono in bridged
mode into 8 Ohms, 400 Watts mono in bridged mode into 4
Ohms. Utilizing Coda’s proprietary bias control topology. True
DC-coupled design based on the high speed circuit topology of
our System S100. Utilizing FET input; MOSFET Voltage gain
and high speed bipolar current gain. No overall feedback. Sixty
50 MHz output transistors each rated at 8 Amperes and 150
Volts. Frequency Response: DC to 100kHz @ -3dB; Max Current:
>100 Amperes peak per channel; Noise: >120dB. 10 year
warranty. Dimensions: 44.5x15x32 cm (LxHxP). Weight: 21 kg
Stereo Amplifier S12.5
The S12.5 is a high bandwidth, Class AB Stereo Amplifier.
Precision Bias Class A/AB operation. Class A to 20 Watts, sliding
to Class AB operation at higher power levels utilizing Coda’s
proprietary bias control topology 125 Watts per channel into 8
Ohms, 250 Watts per channel into 4 Ohms, 500 Watts per
channel into 2 Ohms, 500 Watts mono in bridged mode into 8
Ohms. True DC-coupled design based on the high speed circuit
topology of our flagship System S100; utilizing FET input,
MOSFET Voltage gain, and high speed bipolar current gain.
No overall feedback. Sixty 50 MHz output transistors each rated
at 8 Amp and 150 Volts. Frequency Response: DC to 100kHz
@ -3dB. Max Current: >100 Amp peak. Noise: >120dB. Remotecapable balanced and unbalanced input selection. Dimensions:
44.5x13.5x32 cm (LxHxP). Weight: 21 kg. 10 year warranty.
MULTICHANNEL AMPLIFIER - V Series
Multichannel Amplifier V5a
designed, manufactured and assembled in the USA
The V5a is a special purpose amplifier for high power multichannel
applications. Precision Bias Class A/AB operation, Class A to
25 Watts RMS into 8 Ohms. Four channel mode: 120 Watts x 4,
Three channel mode: 400 Watts x 1 and 120 Watts x 2, Two channel
mode: 400 Watts x 2. FET input with bipolar current gain and no
overall feedback. Proprietary protection circuit guards against
incoming DC and oscillation. Remote controlled balanced and
unbalanced input selection. Remote controlled true standby
circuit activates bias current in output stage.
Double-sided gold-plated circuit boards.
Frequency Response: DC to
-3dB @ 100kHz. Gain:
26dB. Noise: -100dB.
Max current: >60 Amperes
peak per channel.
Dimensions:
44.5x13.5x32 cm (LxHxP)
Weight: 21 kg
10 year warranty
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 4/8
DESCRIPTION
STEREO AMPLIFIER - T Series
designed, manufactured and assembled in the USA
True state-of-the-art high-performance, high-current amplifier in
an affordable, hand crafted chassis. 400 Watts per channel into
8 Ohms, 800 Watts per channel into 4 Ohms, 1 Ohm load stable.
Precision Bias Class A operation to 10 Watts, sliding to Class
AB at higher output level. Fully discrete FET differential input
stage DC coupled to an ultra wideband bipolar output stage.
Very high linear damping with minimal feedback. AC-coupled
unbalanced input and true DC coupled balanced input. 3.0 kVA
toroidal power transformer. Max Current: >150 Amp (peak).
Noise: >-110 dB; Slew Rate: >50 V/us; Bandwidth: 5Hz to 100kHz.
Dimensions: 43x14x36 cm (LxHxP). Weight: 30 kg.
Stereo Amplifier TS
MONO AMPLIFIER - T Series
Monoblock Amplifier TM
designed, manufactured and assembled in the USA
State of the art High Current Monoblock Amplifier - 800 Watts
into 8 Ohms load, 2 Ohm load stable. Class A operation to 10
Watts, Max Current: >150 Ampere peak. Bandwidth: 5Hz to
100kHz. Fully balanced design utilizing a discrete FET differential
input VMOSFET voltage gain stage stage DC coupled to a nonbridged ultra wideband bipolar output stage. Coda’s “Precision
Bias” technique yields a seemless transition from Class A
operation regardless of the complexity of the load impedance.
Very high linear damping. AC-coupled unbalanced input and
true DC-coupled balanced input. 3.0 kVA toroidal power
transformer with independant rectifiers and 80.000 uf of
capacitance. Noise: >-110 dB, Slew
Rate: >50 V/microsecond. Output
impedance: 0.04 Ohms from 20Hz
to 20kHz. Gold plated FR-4 glass
epoxy printed circuit boards,
WBT connectors. Carefully
selected and evaluated
audiophile grade parts,
rigorously tested using both
objective & subjective
techniques. Dimensions:
43x14x36 cm (LxHxP)
Weight: 30 kg
10 year warranty
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 5/8
DESCRIPTION
C SERIES COMPONENTS
designed, manufactured and assembled in the USA
Preamplifier CL
True state-of-the-art remote controlled performance in an
affordable, hand-crafted chassis. Discrete Class A MOSFET
Buffer Stage for smoother, more detailed sound, Independent
unity gain / variable gain adjustment for each input. No overall
feedback. 1 balanced and 3 unbalanced input; Balanced and
unbalanced output; Separate tape monitor and processor loops
(unbalanced). Digitally controlled attenuator design utilizing the
Burr-Brown PGA2310. Frequency Response: 5 Hz-200 kHz,
THD: < 0.02% from 10Hz to 40kHz @ 5V peak into 600 Ohms.
Max Output: 10 Volts peak. Noise: >100dBA. Dimensions:
43x6.5x31 cm (LxHxP). Weight: 8 kg. 10 year warranty.
CP Phono and Line Preamplifier
True state-of-the-art remote controlled performance in an
affordable, hand-crafted chassis. Discrete Class A MOSFET
Gain Stage for smoother, more detailed sound, Independent
variable gain adjustment for each input. No overall feedback.
1 balanced, 1 phono and 3 unbalanced inputs; Balanced and
unbalanced outputs; Separate processor loop (unbalanced).
SMOBC (solder mask over bare copper) FR-4 glass epoxy printed
circuit boards. Wideband, fully-regulated power supply with EMI
and RFI line filtering. Frequency Response: 5 Hz-200 kHz;
THD: < 0.02% from 10Hz to 40kHz @ 6V peak into 600 Ohms.
Max Output: 10 Volts peak. Noise: >100dBA.
Dimensions: 43x6.5x31 cm (LxHxP). Weight: 8 kg.
10 year warranty
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 6/8
DESCRIPTION
STEREO AMPLIFIER
Precision Bias Class A operation
The 15.5 is Coda’s flagship Class A Stereo Amplifier. Optimized
for class A operation the 15.5 is better suited to low-impedance
speaker systems where high current capability yields superior
performance. 150 Watts per channel into 8 Ohms, 300 Watts
per channel into 4 Ohms. Precision Bias Class A operation to
100 Watts, sliding to Class AB at higher output level. Ultra High
Current non-bridged design; Fully discrete FET differential input
stage; Vertical MOSFET Voltage Gain Stage; DC coupled to an
ultra wideband bipolar output stage; Very high linear damping
with minimal feedback. AC-coupled unbalanced input and true
DC coupled balanced input. Double-sided gold plated circuit
boards. 3.0kVA toroidal power transformer; Low-impedance
power supply filter capacitor array. Graphite anodize aluminum
and stainless steel finish. Power supply and Bias status indicators.
10 year warranty
Stereo Amplifier 15.5
Frequency Response: DC to 100kHz @
-3dB, Distortion: < 0.02% from 10Hz to
20kHz @ rated power, Gain: 26dB,
Maximum Current: >100 Ampere peak
per channel. Noise: -120dB; Output
Impedance: 0.03 Ohm from 20Hz to
20kHz; Bridged Mono: 600 Watts Class
AB @ 8 Ohms, 1200 Watts Class AB @
4 Ohms. Outuput Impedance: 0.06 Ohm
from 20Hz to 20kHz; Max Current: >100A
peak; Noise: >120dB.
Dimensions: 44.5x19.7x48.3 cm (LxHxP)
Weight: 50 kg
Made in USA
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 7/8
DESCRIPTION
STEREO AMPLIFIER
Precision Bias Class A & Class AB operation
The 40.0 is Coda’s flagship Class AB stereo amplifier.
400 Watts per channel into 8 Ohms, 800 Watts per channel into
4 Ohms, > 1500 Watts per channel into 2 Ohms, 1 Ohm load
stable. Ultra High Current non-bridged design. Precision Bias
Class AB operation utilizing Coda’s proprietary bias control
topology. Fully discrete FET differential input stage. Vertical
MOSFET Voltage Gain Stage. DC coupled to an ultra wideband
bipolar output stage. Very high linear damping with minimal
feedback. AC-coupled unbalanced input and true DC coupled
balanced input. Double-sided gold plated circuit boards. 3.0kVA
toroidal power transformer. Low-impedance power supply filter
capacitor array. Graphite anodize aluminum and stainless steel
finish. Power supply and Bias status indicators. 10 year warranty.
Stereo Amplifier 40.0
Frequency Response: DC to 100kHz
@-3dB. Distortion: < 0.02 percent from
10Hz to 20kHz @ rated power. Gain:
26dB. Maximum Current: >100 Amperes
peak per channel. Noise: -120dB. Output
Impedance: 0.03 Ohm from 20Hz to
20kHz. Bridged Mono: 1500 Watts Class
AB @ 8 Ohms. Gain: 32dB. Output
Impedance: 0.06 Ohm from 20Hz to
20kHz; Dimensions: 44.5x19.7x48.3 cm
(LxHxP). Weight: 50 kg.
Made in USA.
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
PAG 8/8
DESCRIPTION
MONO AMPLIFIER
Precision Bias Class A & Class AB operation
The 60.0 is Coda’s flagship Class AB Mono Amplifier. Precision
Bias Class AB operation utilizing Coda’s proprietary bias control
topology. High Current amplifier design. Fully discrete FET
differential input stage, Vertical MOSFET Voltage Gain Stage,
DC coupled to an ultra wideband bipolar output stage. Very high
linear damping with minimal feedback, AC-coupled unbalanced
input and true DC coupled balanced input, Double-sided gold
plated circuit boards, 3000VA toroidal power transformer, Lowimpedance power supply filter capacitor array. Extremely wide
bandwidth transistors are used in the output stage instead of the
usual TO3 devices used in other output designs. Each channel
uses 28 individual output transistors with a combined power
rating of 1500 Watts and 120 Amperes with a bandwidth of 50
Mhz. Graphite anodize aluminum and stainless steel finish. Power
supply and Bias status indicators. Designed, manufactured and
assembled in the USA. 10 year warranty.
Dimensions: 44.5x19.7x48.3 cm (LxHxP) - Weight: 50 kg.
Mono Amplifier 60.0
1000 Watts Class AB @ 4 Ohms
500 Watts Class AB @ 8 Ohms
Frequency Response: DC to -3dB @
100kHz; Distortion: < 0.02 percent from
10Hz to 20kHz @ rated power; Gain:
32dB; Maximum Current: >120 Amperes
peak; Noise: -120dB reference to rated
output; Input Impedance: 10k Ohms
balanced. Output Impedance: 0.06 Ohms
from 20Hz to 20kHz. Power Filtering:
184.000 microfarad.
Tel. +39 080-314.32.24 - [email protected] - www.proaudioitalia.it
Immagini, disegni e caratteristiche potranno subire variazioni in qualsiasi momento senza preavviso. Ogni forma di riproduzione del presente documento (anche parziale), se non autorizzata, è vietata a termine di legge. Proprietà riservata ProAudio Italia.
MODEL
Scarica

CODA guida 2016v1